Get Started with the Cisco Calling Plans

Cisco Calling Plans requirements and limitations

You can select varied connections for multisite applications. For example, you can select Cisco Calling Plans for one location, Cloud-Connected PSTN (CCP) for a second location, and Local Gateway for the third location. When choosing the Cisco Calling Plans, the following applies.

General guidelines for Number ordering

Cisco makes no guarantee regarding the availability of phone numbers, even if that number is listed by Cisco as available.
You won’t lease or sell any phone number provided by Cisco.
Caller ID Name may not always reflect your requested name.
Cisco treats all phone numbers as two-way numbers.
For New number ordering
- You can order numbers from Cisco individually or in a consecutive block, where the numbers are in sequential order (that is a "Block Order").
- You can order a Block Order in increments of 10, 50 or 100.
- You can’t delete individual numbers that were ordered as part of a Block Order. To remove a portion of the block, delete the entire block and then order new numbers.
- You cannot order block of toll-free numbers. Currently, toll-free numbers are only available in the U.S. and Canada locations for Cisco Calling Plans.

Requirements

Partners must be an authorized Webex Calling partner and have accepted the new Webex Calling addendum through enrollment into the Webex Calling PSTN program.
A minimum of one committed Outbound Calling Plan license must be purchased to enable access to all services associated with Cisco Calling Plans.

Limitations

Cisco Calling Plans are currently available to specified countries.
Existing Webex Calling locations or telephone numbers can only transition to Cisco Calling Plans in certain scenarios. For details on supported migration paths, refer Supported paths for PSTN migration section.
You can order a maximum of 100 new standard phone numbers at a time. Additional numbers can be placed as a separate order.
You can't order a block of toll-free numbers.
Cisco Calling Plans aren’t supported with Webex Contact Center or authorized for use in which high-concurrent calls or high-volume calls or uncommonly short or long calls are made. For more information about the Webex Contact Center, see Get started with Webex Contact Center.
Except for 911 calls, Cisco Calling Plans don't support calls to X11 services including directory service calls.
Some premium services and international destinations may not be available for operational purposes. If specific destinations which aren’t generally available are required, customers can open a support case to request availability.

Cisco Calling Plans trials

Cisco Calling Plans are available for technical evaluation as part of the Webex Calling trial process. While Cisco Calling Plans trials are free to use, there are some neddotable limitations during the trial phase.

As you can convert the trial accounts to paid accounts, the required regulatory documentation, as mentioned in the 'Order New Phone Numbers' section under each country, is also mandatory for trial services. These documents are legally required by country regulators for our Telephone Number (TN) provisioning team to procure the numbers.

Each trial account can provision up to 10 standard telephone numbers from Cisco Calling Plans with Webex Calling. It isn’t permitted to provision more than 10 numbers per trial.
Only new, standard telephone numbers are supported in trials. Ported numbers, consecutive blocks, and inbound toll-free numbers aren’t supported on trial accounts. You also cannot port numbers out of a trial. You must convert to a paid account if you wish to use these features.
International calling, along with Premium Service Call types I & II are blocked from use during the trial period.
Business Texting isn’t available on Webex Calling trial accounts.
Trial accounts are intended for technical evaluation purposes only, and not for normal commercial operation. As such, emergency services are only meant for technical evaluation; actual emergency calls can’t be guaranteed. Users shouldn’t place actual emergency service calls on a trial account.

When placing an order to convert a Webex Calling trial with Cisco Calling Plans to a paid subscription, you must order at least one Cisco Calling Plan committed license to maintain the telephone numbers and configuration used in the trial.

Set up your Cisco Calling Plan

Once your Cisco Calling Plan service is enabled, you can select one of the PSTN options:

Cisco Calling Plans (Cisco PSTN)
Cloud Connected PSTN
Premise-based PSTN (Local Gateway must be enabled separately. For more information, see Configure Premises-based PSTN in Control Hub.)

1	From the customer view in https://admin.webex.com, go to Management > Locations and select the location you want to update.
2	Select the Calling tab and Click Manage next to PTSN Connection.
3	Select Cisco Calling Plans and click Next.
4	Enter the contact information and click Next. This field is for the contact information of the person who will sign the legal contract with Cisco.
5	Enter the Emergency Services Address (ESA), and click Save. By default, the ESA entered here is applied to all phone numbers for this location. You can change the ESA for an individual user if needed. For example, you may need to change the ESA if you have a remote employee who works from home.
6	On the summary screen, do one of the following: Add numbers. Click Done. You can add numbers to your calling plan later.

Order new phone numbers

With the Cisco Calling Plan, you can order new phone numbers directly from Cisco through Control Hub.

Before you begin

The Cisco Calling Plan must be enabled for your site before you can order new phone numbers, including toll-free numbers, through Control Hub.
When requesting new numbers, you can enter specific numbers or a block of consecutive numbers. You can also allow the system to assign numbers from the search inventory based on the country, state, area code, and prefix you select.
By default, the Emergency Service Address (ESA) entered for a location during your Cisco Calling Plan setup applies to all phone numbers for that location.
If the location subscription has the Service Number license, you can add the numbers as a Service Number.
You can modify the existing Standard Number to Service Number in a Cisco Calling Plan location with the Service Number license.
You can move Service Numbers between Cisco Calling Plan locations with the Service Number license.

1	From the customer view in https://admin.webex.com, go to Calling and click Numbers > Add Numbers.
2	Choose a Location in the Add New Numbers page.
3	Choose one of the following options: Regular phone numbers Consecutive number block Toll-free numbers
4	Specify the numbers that you want to order by selecting the Country, State, and the Area Code or City to search by.
5	Select the type of number to order from: Standard Numbers By default, all numbers are added as Standard Numbers. If a number is added to a cart, then the selection isn’t available.
6	Click the numbers that you would like to order, then click Order. The numbers you selected appears in the cart.
7	On the order submission confirmation page, select PSTN Orders to check your order status. The PSTN Orders page displays.
8	Accept the Terms of Service to activate the new numbers. The Terms of Service link is only available to customer administrators. Partners only see a message that the Terms of Service must be signed by the customer.

Order a block of numbers

With the Cisco Calling Plan, you can order blocks of telephone numbers directly from Cisco through Control Hub.

Before you begin

Ordering blocks of numbers is only available for customers with a paid subscription.
The maximum number of block numbers that can be ordered is 100.
Numbers ordered in a block can only be deleted if the entire block is deleted.
By default, the Emergency Service Address (ESA) entered for a location during your Cisco Calling Plan setup is applied to all phone numbers for that location.

1	From the customer view in https://admin.webex.com, go to Calling and click Numbers > Add Numbers.
2	Choose a location and select Order New Numbers, click Next.
3	Select the toggle for Get a Set of Numbers that Follow Each Other in Order.
4	From the drop-down, select the quantity of block numbers needed.
5	Specify State and use either Area Code/Prefix or City as your search criteria, and click Search.
6	Select from the list of available blocks of numbers provided, based on your search criteria, and click Order.
7	On the order submission confirmation page, select the PSTN Orders to check your order status. This brings you to the PSTN Orders page.
8	Accept the Terms of Service to activate the new numbers.

Port phone numbers

As an administrator, you can move existing phone numbers, including toll-free numbers, from your current PSTN to the Cisco Calling Plan option.

Before you begin

We strongly recommend you to read and familiarize yourself with the Cisco Calling Plan Number Porting Guidelines and Policies before you start porting the numbers.

Enable Cisco Calling Plan for your site before you port phone numbers through Control Hub.
A signed Letter of Agency (LOA) is needed, authorizing Cisco to place orders with the current PSTN carrier to move the service to Cisco. The current account owner or authorized signer must sign the LOA. You're prompted to sign the LOA while completing the porting steps.
Ensure you have a recent bill from the last 30 days in PNG or PDF format from your current PSTN provider. While porting, you’re prompted to upload a copy of your bill.
To ensure a successful port, make sure you have the following information ready:
- List of all phone numbers to port
- Current PSTN provider account information
- Customer Service Record (CSR) if available
- Your account PIN if one exists.
When porting numbers and choosing the numbers to port, we recommend that you consider any number that receives inbound calls. See Cisco Calling Plan Number Porting Guidelines and Policies for more information.
By default, the Emergency Service Address (ESA) entered for a location during your Cisco Calling Plan setup is applied to all phone numbers for that location.

When you request for porting a number, both Calling and Messaging services related to the number are ported in the United States and Canada. If you don’t want to port both these services, then contact PSTN Technical Support. Go to Control Hub and click on PSTN Help link for PSTN technical support.

1	From the customer view in https://admin.webex.com, go to Calling and click Numbers > Add Numbers.
2	Choose a location and Number Type in the Add New number page.
3	Select Port Numbers Over and click Next.
4	Add the phone number that you want to port over, and then click Save & continue. A portability check is automatically run when you enter the numbers. Highlighted numbers are non portable. PSTN Technical Support supports further review of these instances.
5	You can choose to add the numbers as: Standard Numbers Service Numbers If the Cisco Calling Plan for your location has the Service Number license, you can select Service Number else you can’t select this option. Contact your Partner to allow you to purchase Service Numbers for your subscription.
6	Enter your account information with your current provider. Make sure that the information entered matches your current provider bill. Click Next.
7	Upload a bill from your previous provider. Make sure that the bill is from the last 30 days and is in PNG or PDF format. Click Next.
8	Enter your first and last name and job title to sign the Letter of Agency (LOA). Click Sign & Submit.
9	Review your order and click Next.
10	The order submission screen shows a summary of your port order. Click Done. Control Hub conducts a preliminary error check before you submit a port order. If there are any issues found with a port order, administrators receive an email notification, and an error message appears on the PSTN Orders screen.

Manage PSTN

When placing orders for new numbers or porting existing numbers, you can check the order status or port rejection notices in Control Hub.

A migration banner displays when there are locations to migrate from Non-Integrated CCP to Integrated CCP.

From the customer view in https://admin.webex.com, go to Calling and then click PSTN.

A status is assigned for every order.
Select an order to check its status.

Status values for New Number Orders

Displayed Status	Description

Pending	New numbers order is created by the user.
Provisioned	New numbers are provisioned.
Error	An issue is detected with the new numbers order. Create a TAC ticket to get help.

Status Values for Ported Number Orders

Displayed Status	Description

Pending	User is in the process of creating/filling in details of the Porting Order. Once submitted, the order will still show Pending until Cisco validates and accepts the porting order.
Rejected	Porting issue is detected. See the Porting Errors table for additional details. Alternatively, go to Control Hub and click on the PSTN Help link for PSTN technical support.
Submitted	Porting Order is validated and accepted.
FOC Received	FOC date confirmation from the previous PSTN provider received.
Completed	Porting process is complete.
Canceled	Order is canceled.

Porting Error Messages

Displayed Error	Description	How to fix

Account number mismatch	Account number does not match the number on the Customer Service Record (CSR)	Update the Account Number field on the PSTN Order and resubmit. For some carriers, the account number may be the same as the BTN or the telephone number itself.
Account number required	The account number wasn't provided but is required.	Update the Account Number field on the PSTN Order and resubmit. For some carriers, the account number may be the same as the BTN or the telephone number itself.
Account name mismatch	The person authorizing doesn't match the name on the (CSR).	Update the Authorized name on account field on the PSTN order and resubmit.
BTN mismatch	BTN or ATN does not match that on the CSR.	Update the Carrier billing phone number field on the PSTN Order and resubmit.
Company name mismatch	Entity name does not match that on the CSR.	Update the Company name with previous carrier field on the PSTN order and resubmit.
Multiple BTNs	The OSP requires this Porting Order to be split and submitted as separate orders.	Cancel the current PSTN order and create new, multiple PSTN Orders. Create one for each group of numbers that have the same BTN.
FOC rejected by losing carrier	The FOC date requested cannot be accommodated by the OSP.	Update the Port Complete date field on the PSTN order and resubmit.
Unknown	Go to Control Hub and click on PSTN Help link for PSTN technical support.	Go to Control Hub and click on PSTN Help link for PSTN technical support.
Invalid PIN	Passcode/PIN must be provided for wireless port.	Update the PIN field on the PSTN order and resubmit.
Pending order	The OSP has a pending LSR on the account (for example, a port out or address change).	Remove the telephone numbers in question from the PSTN order and resubmit.
Pending main BTN	BTN is one of the phone numbers being ported. User must indicate Porting Order Type, Remaining Numbers Action, and New Billing Phone Number accordingly.	Remove the main BTN from the list of telephone numbers being ported and resubmit the order. Please include the Main BTN into the last iteration of numbers (if porting numbers in multiple iterations).
Service address mismatch	The location info doesn't match that on the CSR.	Update the Service address, State, and City fields and resubmit the order.
TN has special feature	Some of the phone numbers can't be ported because they have a special feature (for example, remote call forward).	Remove number(s) with special features from the PSTN order and resubmit. Or, unassign special feature from the numbers being ported.
TN mismatch	Some of the phone numbers don't belong to the end user.	Remove the number(s) in question and resubmit the order.
TN not portable	Some of the phone numbers can't be ported because they're inactive or aren't part of the end user's account.	Try to remove the number(s) in question and resubmit the PSTN order.
Unsupported rate center	The rate center isn't portable.	Remove the number(s) in question and resubmit the order.
Zip/postal code mismatch	Postal code doesn't match the one on the CSR.	Update the Zip code field and resubmit the order.
Previous carrier's bill is invalid	The invoice is invalid.	Go to PSTN Order details, then open Previous Carrier’s Bill section. Upload the correct bill file and resubmit the order.
LOA invalid	The LOA is invalid.	Sign the LOA and resubmit the PSTN order. Alternatively, go to Control Hub and click on the PSTN Help link for PSTN technical support.

PSTN – Public Switched Telephone Network

CSR – Customer Service Record

FOC – Firm Order Commitment

OSP – Old Service Provider

BTN – Billing Telephone Number

ATN – Account Telephone Number

Select your PSTN provider

The card view displays the PSTN provider available for the Webex Calling customer before configuring the PSTN location. The PSTN view displays both Providers and Orders.

You can apply the search filter to filter content based on Service Type and Market. Use the toggle option to change the view from Compact to Table. The compact view helps to resize the card to display the provider details without the service information.

The provider screen displays the various provider cards with the list of supported service types. The Providers section is classified into the following:

Preferred Calling providers
Certified Calling providers
Calling providers

Click the Learn More option on the card to view details of the provider. It displays Use the search field to select the PSTN service provider based on Cisco business relationship preference such as certified provider and Calling provider.

The providers include the following:

Provider summary
List of locations configured with this provider
List of markets that the provider is available for the supported services.

If the customer has PSTN locations where Calling services aren’t set up, the Select this provider action bar displays. Use this option to configure the service for the PSTN location.

The preferred view in the Control Hub displays the calling providers that the managing partner prefers to work. However, you can view all available calling providers with Webex Calling. This section provides the following:

Select the location from the drop-down menu.
Choose the subscription type for the users to use the Cisco Calling plans. Click Next.
Complete the fields for Contract Information and Emergency Service Address configuration.

The PSTN service set up is now complete.

Change the emergency service address for a user

By default, the Emergency Service Address (ESA) specified for a location during Cisco Calling Plan setup applies to all of the phone numbers under that location. If you need to modify this for a user, for example, if you have a remote employee who works from home, you can associate a different ESA with the phone number assigned to that user.

1	From the customer view in https://admin.webex.com, go to Users.
2	Select the user you want to modify and click Calling.
3	Select the primary phone number under Directory Numbers.
4	Under Emergency Service Address, select Custom Address.
5	Update the information for the user and click Save.

Change the emergency service address for a location

Once a location is set up with the Cisco Calling Plan, you can update the Emergency Service Address.

1	From the customer view in https://admin.webex.com, go to Management > Locations and select the location you want to update.
2	Next to PSTN Connection, click Manage.
3	Next to the Emergency Service Address, click Edit.
4	Enter the new addres and click Save.

Order Service Numbers

Webex Calling currently has a singular number type for both end users and site services although the call volumes between the two are different. Therefore, using a service number you can handle hundreds of calls simultaneously unlike standard phone numbers.

To order a service number, consider these pointers:

If the carriers offer Service Number as a PSTN number for a location, then you can order the Service numbers.
If you use a premise-based PSTN or Non-Integrated Cloud Calling Plan with a paid subscription, then you can order Service Numbers.
You can change all unassigned numbers in a location that aren’t mobile or toll-free numbers from Standard to Service Number.
You can only assign Service Numbers to site services like Auto Attendant, Call Queue, and Contact Center.
You can use Service Numbers as a main number for a Webex location and use it as a caller ID for a user or a workspace.

To order service numbers, follow these steps:

1	From the Control Hub, go to Calling and click Numbers > Add Numbers.
2	Choose a Location and Number Type. Click Next.
3	Choose Service Numbers on the Add numbers page. Enter the number that you wish to order, then click Next. Toll free numbers are added as toll free irrespective of the selection. If the Service Numbers option is grayed, then a pop-up displays when you hover over. You can't use Service Numbers as the network provider at this location doesn't support service numbers. The order is submitted successfully.

To modify an existing Standard number to a Service Number, follow these steps:

From the Control Hub, go to Calling and click Numbers
Select the number that you wish to change using the Actions drop down. Choose Modify from the drop-down. The Modify numbers window displays that you’re modifying the number type from Standard to Service number. Click Save.
On the Numbers window, you now observe the Service Number indication against the number.
The Numbers page on Control Hub has a Service Numbers filter. The Numbers page displays the count of Service Numbers allocated and a Service Number indication against the relevant number.

Use Case 1: Add Service Numbers to a Premises-Based PSTN Location with Toll Free numbers

If there’s a mix of service and toll-free numbers when selecting the Service number option, the toll free numbers are added as toll free irrespective of the selection.

Use Case 2: Add Numbers to a Non-Integrated CCP Location without Service Numbers on Carrier

If the carrier doesn’t support Service Number, then the Standard number radio button is selected by default while the Service number radio button is disabled.

Supported paths for PSTN migration

Webex Calling provides flexible Calling plans and the ability to choose the PSTN solution that fits the requirement. Over time you may have to migrate to a different PSTN solution due to changes in the business environment or other factors.

Use this matrix to know the potential PSTN migration paths for Webex Calling.

Webex Calling supports the following PSTN migration paths:

Using Self Service through Control Hub
- Premises-based PSTN, non-integrated CCPP, and non-integrated IntelePeer to Cisco Calling Plans. See Migrate to Cisco Calling plans.
- Non-integrated CCP to Integrated CCP. See, Migrating from Non-Integrated CCP to Integrated CCP (webex.com)
- Non-integrated CCP Provider including non-integrated Intelepeer to a Premises-based Solution. See, Configure premises-based PSTN in Control Hub
Using Manual Migration
- Premises-based solution to Integrated CCP Provider
- Integrated CCP Provider to Non-integrated CCP Provider (Exception: Non-integrated Intelepeer isn’t supported as the target CCP Provider)
- Integrated CCP Provider to Premises-based Solution

To use the manual migration process, you must create a new location, move TNs and users to the new location, and reconfigure site services/service assignments. During migration, you experience service interruption and there’s a risk of data loss.

Here’s a list of unsupported PSTN migration paths:

Cisco Calling Plans to integrated Intelepeer
Integrated Intelepeer to Cisco Calling Plans

Your Cisco Calling Plan bill

The minimum required order is one Outbound Calling Plan (OCP). Billing includes charges for outbound calling plans, phone numbers, and international calling usage. Your Cisco monthly billing invoice includes information on call activity, charges, and applicable fees and taxes. There is no additional charge to port phone numbers.

When your billing begins:

Outbound Calling Plans ordered in CCW begin billing on the requested service date (RSD).
Outbound Calling Plans provisioned in Control Hub begin billing immediately.
Phone numbers provisioned in Control Hub begin billing immediately or, if ported from another provider, will begin billing upon port completion.

Outbound calling plan rates:

Rates for the Outbound Calling Plans and phone numbers are pro-rated using the same proration methord used to calculate the rates for the Webex Calling licenses.
International calling rates vary by country and are billed the month following usage.

Find support for Cisco Calling Plans

Cisco Calling Plans support is provided by various support divisions, depending on your need.

Table 1. Cisco Support Contact Information
Support Division	Purpose	Contact Information
Partner Help Desk (PHD)	Partner how-to and/or documentation inquiries, Pre-quoting Regulatory Tax and other enquiries about the Cisco Calling Plans offering.	North America: 1-844-613-6108 EMEA: +44 129 366 10 20 APAC: +61 3 7017 7272 Email: webexcalling-phd@cisco.com
PSTN Technical Support (PTS)	Partner/Customer PSTN-related questions Port order expedite requests Port date reschedules Port rejections Specific date/time requests for a port Port date changes post FOC (Firm Order Commitment) Order cancellations	Go to Control Hub and click on PSTN Help link for PSTN technical support.
TAC	Issues with Control Hub functionality Issues with service, such as dropped calls, call quality issues, or service outages	North America: 1-800-553-2447 EMEA: +32 2 704 5555 APAC: +61 2 8446 7411 Email: tac@cisco.com See also: Help with TAC Open a support case
Invoice & Collections	VAT, Payment and other invoicing queries	Contact the Collector on the Invoice via email or phone
Cisco SaaS Support Team (CES)	Quoting Order Booking & Management Provisioning Subscription Management Billing & Invoicing Disputes	Refer Partner Support Playbook and Cisco Calling Plans FAQ Create a case through link below if the required information is not found in the playbook - https://customerservice.cloudapps.cisco.com/

Cisco Calling Plans requirements and limitations

You can select varied connections for multi-site applications. For example, you can select Cisco Calling Plans for one location, Cloud-Connected PSTN (CCP) for a second location, and Local Gateway for the third location. When choosing the Cisco Calling Plans, the following applies.

Requirements

Partners must be an authorized Webex Calling partner and have accepted the new Webex Calling addendum through enrollment into the Webex Calling PSTN program.
A minimum of one committed Outbound Calling Plan license must be purchased to enable access to all services associated with Cisco Calling Plans.

Limitations

Cisco Calling Plans are currently available to specified countries.
Existing Webex Calling locations or telephone numbers can only transition to Cisco Calling Plans in certain scenarios. For details on supported migration paths, refer Supported paths for PSTN migration section.
You can order a maximum of 100 new standard phone numbers at a time. Additional numbers can be placed as a separate order.
Toll-free numbers aren’t currently available. You can’t order new toll-free numbers or port existing toll-free numbers to the Cisco Calling Plans.
Cisco Calling Plans aren’t supported with Webex Contact Center or authorized for use in which high-concurrent calls or high-volume calls or uncommonly short or long calls are made. For more information about Webex Contact Center, see Get started with Webex Contact Center.
Some premium services and international destinations may not be available for operational purposes. If specific destinations which are not generally available are required, customers can open a support case to request availability.

Select your PSTN provider

The card view displays the PSTN provider available for the Webex Calling customer before configuring the PSTN location. The PSTN view displays both Providers and Orders.

The provider screen displays the various provider cards with the list of supported service types. The Providers section is classified into the following:

Preferred Calling providers
Certified Calling providers
Calling providers

The providers include the following:

Provider summary
List of locations configured with this provider
List of markets that the provider is available for the supported services.

If the customer has PSTN locations where Calling services aren’t set up, the Select this provider action bar displays. Use this option to configure the service for the PSTN location.

Select the location from the drop-down menu.
Choose the subscription type for the users to use the Cisco Calling plans. Click Next.
Complete the fields for Contract Information and Emergency Service Address configuration.

The PSTN service set up is now complete.

Cisco Calling Plans trials

Each trial account can provision up to 10 standard telephone numbers from Cisco Calling Plans with Webex Calling. It isn’t permitted to provision more than 10 numbers per trial.
Only new, standard telephone numbers are supported in trials. Ported numbers, consecutive blocks, and inbound toll-free numbers aren’t supported on trial accounts. You also cannot port numbers out of a trial. You must convert to a paid account if you wish to use these features.
International calling, along with Premium Service Call types I & II are blocked from use during the trial period.
Business Texting isn’t available on Webex Calling trial accounts.
Trial accounts are intended for technical evaluation purposes only, and not for normal commercial operation. As such, emergency services are only meant for technical evaluation; actual emergency calls can’t be guaranteed. Users shouldn’t place actual emergency service calls on a trial account.

Set up your Cisco Calling Plan

Once your Cisco Calling Plan service is enabled, you can select one of the PSTN options:

Cisco Calling Plans (Cisco PSTN)
Cloud Connected PSTN
Premise-based PSTN (Local Gateway must be enabled separately. For more information, see Configure Premises-based PSTN in Control Hub.)

1	From the customer view in https://admin.webex.com, go to Management > Locations and select the location you want to update.
2	Select the Calling tab and Click Manage next to PTSN Connection.
3	Select Cisco Calling Plans and click Next.
4	Enter the contact information and click Next. This field is for the contact information of the person who will sign the legal contract with Cisco.
5	Enter the Emergency Services Address (ESA), and click Save. By default, the ESA entered here is applied to all phone numbers for this location. You can change the ESA for an individual user if needed. For example, you may need to change the ESA if you have a remote employee who works from home.
6	On the summary screen, do one of the following: Add numbers. Click Done. You can add numbers to your calling plan later.

Order new phone numbers

Before you begin

The Cisco Calling Plan must be enabled for your site before you can order new phone numbers through Control Hub.
By default, the Emergency Service Address (ESA) entered for a location during your Cisco Calling Plan setup is applied to all phone numbers for that location.
Provide the following information for business identity verification:
- First name and last name of the legal representative
- Contact phone number
- Copy of passport or any ID card
- Company name
- Local company registeration certificate
- VAT number
Provide the following information for address verification:
- Address matching the DID area code (street, building number, postal code, city, and country)
- Proof of address, not older than last 3 months

1	From the customer view in https://admin.webex.com, go to Calling and then click Numbers > Add Numbers.
2	Choose a location and click Select under Order new numbers. Click Next. You’re directed to Contact Support to order new numbers.
3	Click Contact Support. Your location information is automatically populated on the Case Details window.
4	Indicate how many new numbers you’re requesting in the Number of Telephone Numbers Requested field.
5	From the Number Type drop-down list, choose Local or National as the case maybe.
6	(Optional) Enter the additional details.
7	Click Submit. You receive a PSTN Order Number which displays on the PSTN order page. It can take up to 5 - 7 business days for the ordering and document approval process.

Port phone numbers

Before you begin

We strongly recommend you to read and familiarize yourself with the Cisco Calling Plan Number Porting Guidelines and Policies before you start porting the numbers.

Enable Cisco Calling Plan for your location before you port phone numbers through Control Hub.
A signed Letter of Agency (LOA) is needed, authorizing Cisco to place orders with the current PSTN carrier to move the service to Cisco. The LOA must be signed by the current account owner or authorized signer. You're prompted to sign the LOA while completing the porting steps.
Make sure you have a recent bill in PNG or PDF format from your current PSTN provider. The bill must not be older than 30 days. While completing the porting steps, you’re prompted to upload a copy of your bill.
For successful porting, ensure that you have the following information ready:
- List of all phone numbers to port (non-toll free)
- Current PSTN provider account information
- Customer Service Record (CSR) if available
- Your account PIN if one exists
- VAT number or Tax ID
When planning for which numbers to port, we recommend that you consider any number that receives inbound calls. See Cisco Calling Plan Number Policy for more information.
By default, the Emergency Service Address (ESA) entered for a location during your Cisco Calling Plan setup is applied to all phone numbers for that location.

As an administrator, you can move existing phone numbers from your current PSTN to the Cisco Calling Plan option. The following are the types of porting services:

Standard port: When a phone number moves from one service provider to another, without any special circumstances. For example, porting a number from Carrier A to Carrier B within the same country and service area is a Standard port.
Mixed operator port: A more complex porting situation that involves multiple operators or service providers. For example, porting a range of numbers in a block that belongs to two or more network operators is a Mixed operator port.

Porting of numbers is done in a fixed time slot in the following countries:

Porting time slot	Countries
Monday to Friday between 8 a.m. to 3 p.m.	Switzerland, Belgium, Sweden
Monday to Friday between 9 a.m. to 4 p.m.	Netherlands, Lithuania, Luxembourg, Denmark
Monday to Friday between 8 a.m. to 5 p.m.	Finland

Requests for porting out of hours are on a case-by-case basis and depend on the carriers involved. We can’t guarantee that out of hours porting is available.

1	From the customer view in https://admin.webex.com, go to Calling and click Numbers > Add Numbers.
2	Choose a location and click Select under Port numbers over. Click Next.
3	Add the phone numbers that you want to port, and then click Save & continue.
4	Enter the Date and Time by when you want the porting to finish. The schedule is set based on your preference. But it’s not guaranteed that the porting of your numbers is finished at the exact date and time selected.
5	(Optional) Enter an additional email address, other than the default contact listed, to receive notifications regarding the port order status.
6	Click Next.
7	Enter your current carrier account information in the fields provided. Make sure this matches the information on your previous carrier’s bill.
8	Click Next.
9	Upload your previous carrier bill (not older than 30 days).
10	Click Next.
11	Upload the LOA. The authorized contact for your previous carrier’s account needs to upload the signed LOA. Open a ticket with Webex Partner Help Center to get the LOA required for your country and upload the signed copy here. If you're not the authorized contact, skip this step for now. That person can come back and upload the signed LOA later, we’ll send your order contacts a reminder.
12	Click Save & continue.
13	Your Port Order is submitted. You can check the order status in PSTN Orders.
14	Click Done. Our support team contacts you for any additional documents requirements to complete your porting request. You can upload the requested documents in the right-hand panel of the order. The Firm Order Commitment (FOC) date can be two business days later from the submission date. An FOC is the date on which the losing carrier states that it releases a phone number to the winning carrier. After the losing carrier confirms the porting request, you can cancel or postpone the porting request as per the following rules: These timeframes are estimates and aren’t bound by any SLA. You can cancel or reschedule a standard porting operation to five working days before the porting date. You can cancel or reschedule a mixed operator porting operation to seven working days before the porting date. If porting takes place and you need to roll back the numbers to the previous carrier, raise such requests with the PTS team at the earliest. Rollbacks aren’t always possible and may require placing a port back request with the previous carrier.

Manage PSTN

When placing orders for new numbers or porting existing numbers, you can check the order status or port rejection notices in Control Hub.

A migration banner is displayed when there are locations which need to be migrated from Non-Integrated CCP to Integrated CCP.

From the customer view in https://admin.webex.com, go to Calling and click PSTN.

Every order submitted has a status value.
Select an order to check its status.

Status Values for New Number Orders

Displayed Status	Description

Pending	A New numbers order has been created by the user.
Provisioned	New numbers are provisioned.
Error	An issue is detected with the new numbers order. Create a TAC ticket to get help.
Action Required	Click to contact PTS for assistance.

Status Values for Ported Number Orders

Displayed Status	Description

Pending	User is in the process of creating/filling in details of the Porting Order. Once submitted, the order will still show Pending until Cisco validates and accepts the porting order.
Rejected	Porting issue is detected. See the Porting Errors table for additional details. If required, go to Control Hub and click on the PSTN Help link for PSTN technical support.
Submitted	Porting Order is validated and accepted.
FOC Received	FOC date confirmation from the previous PSTN provider received.
Completed	Porting process is complete.
Canceled	Order is canceled.

Porting Error Messages

Displayed Error	Description	How to fix

Account number mismatch	Account number doesn’t match the number on the Customer Service Record (CSR)	Update the Account Number field on the PSTN Order and resubmit. For some carriers, the account number may be the same as the BTN or the telephone number itself.
Account number required	The account number wasn't provided but is required.	Update the Account Number field on the PSTN Order and resubmit. For some carriers, the account number may be the same as the BTN or the telephone number itself.
Account name mismatch	The person authorizing doesn't match the name on the (CSR).	Update the Authorized name on account field on the PSTN order and resubmit.
BTN mismatch	BTN or ATN doesn’t match that on the CSR.	Update the Carrier billing phone number field on the PSTN Order and resubmit.
Company name mismatch	Entity name does not match that on the CSR.	Update the Company name with previous carrier field on the PSTN order and resubmit.
Multiple BTNs	The OSP requires this Porting Order to be split and submitted as separate orders.	Cancel the current PSTN order and create a new, multiple PSTN Orders. Create one for each group of numbers that have the same BTN.
FOC rejected by losing carrier	The FOC date requested can’t be accommodated by the OSP.	Update the Port Complete date field on the PSTN order and resubmit.
Unknown	Go to Control Hub and click on the PSTN Help link for PSTN technical support.	Go to Control Hub and click on the PSTN Help link for PSTN technical support.
Invalid PIN	Passcode/PIN must be provided for wireless port.	Update the PIN field on the PSTN order and resubmit.
Pending order	The OSP has a pending LSR on the account (for example, a port out or address change).	Remove the telephone numbers in question from the PSTN order and resubmit.
Pending main BTN	BTN is one of the phone numbers being ported. User must indicate Porting Order Type, Remaining Numbers Action, and New Billing Phone Number accordingly.	Remove the main BTN from the list of telephone numbers being ported and resubmit the order. Include the Main BTN into the last iteration of numbers (if porting numbers in multiple iterations).
Service address mismatch	The location info doesn't match that on the CSR.	Update the Service address, State, and City fields and resubmit the order.
TN has special feature	Some of the phone numbers can't be ported because they have a special feature (for example, remote call forward).	Remove numbers with special features from the PSTN order and resubmit. Or, unassign a special features from the numbers being ported.
TN mismatch	Some of the phone numbers don't belong to the end user.	Remove one or more numbers in question and resubmit the order.
TN not portable	Some of the phone numbers can't be ported because they're inactive or aren't part of the end user's account.	Try to remove one or more numbers in question and resubmit the PSTN order.
Unsupported rate center	The rate center isn't portable.	Remove one or more numbers in question and resubmit the order.
Zip/postal code mismatch	Postal code doesn't match the one on the CSR.	Update the Zip code field and resubmit the order.
Previous carrier's bill is invalid	The invoice is invalid.	Go to PSTN Order details, then open Previous Carrier’s Bill section. Upload the correct bill file and resubmit the order.
LOA invalid	The LOA is invalid.	Sign the LOA and resubmit the PSTN order. Alternatively, go to Control Hub and click on the PSTN Help link for PSTN technical support.

PSTN – Public Switched Telephone Network

CSR – Customer Service Record

FOC – Firm Order Commitment

OSP – Old Service Provider

BTN – Billing Telephone Number

ATN – Account Telephone Number

Change the emergency service address for a user

1	From the customer view in https://admin.webex.com, go to Users.
2	Select the user you want to modify and click Calling.
3	Select the primary phone number under Directory Numbers.
4	Under Emergency Service Address, select Custom Address.
5	Update the information for the user and click Save.

Change the emergency service address for a location

Once a location is set up with the Cisco Calling Plan, you can update the Emergency Service Address.

1	From the customer view in https://admin.webex.com, go to Management > Locations and select the location you want to update.
2	Next to PSTN Connection, click Manage.
3	Next to the Emergency Service Address, click Edit.
4	Enter the new addres and click Save.

Supported paths for PSTN migration

Use this matrix to know the potential PSTN migration paths for Webex Calling.

Webex Calling supports the following PSTN migration paths:

Using Self Service through Control Hub
- Premises-based PSTN, non-integrated CCPP, and non-integrated IntelePeer to Cisco Calling Plans. See Migrate to Cisco Calling plans.
- Non-integrated CCP to Integrated CCP. See, Migrating from Non-Integrated CCP to Integrated CCP (webex.com)
- Non-integrated CCP Provider including non-integrated Intelepeer to a Premises-based Solution. See, Configure premises-based PSTN in Control Hub
Using Manual Migration
- Premises-based solution to Integrated CCP Provider
- Integrated CCP Provider to Non-integrated CCP Provider (Exception: Non-integrated Intelepeer isn’t supported as the target CCP Provider)
- Integrated CCP Provider to Premises-based Solution

Here’s a list of unsupported PSTN migration paths:

Cisco Calling Plans to integrated Intelepeer
Integrated Intelepeer to Cisco Calling Plans

Your Cisco Calling Plan bill

When your billing begins:

Outbound Calling Plans ordered in CCW begin billing on the requested service date (RSD).
Outbound Calling Plans provisioned in Control Hub begin billing immediately.
Phone numbers provisioned in Control Hub begin billing immediately or, if ported from another provider, will begin billing upon port completion.

Outbound calling plan rates:

Rates for the Outbound Calling Plans and phone numbers are pro-rated using the same proration methord used to calculate the rates for the Webex Calling licenses.
International calling rates vary by country and are billed the month following usage.

Find support for Cisco Calling Plans

Cisco Calling Plans support is provided by various support divisions, depending on your need.

Table 3. Cisco Support Contact Information
Support Division	Purpose	Contact Information
Partner Help Desk (PHD)	Partner how-to and/or documentation inquiries, Pre-quoting Regulatory Tax and other enquiries about the Cisco Calling Plans offering.	North America: 1-844-613-6108 EMEA: +44 129 366 10 20 APAC: +61 3 7017 7272 Email: webexcalling-phd@cisco.com
PSTN Technical Support (PTS)	Partner/Customer PSTN-related questions Port order expedite requests Port date reschedules Port rejections Specific date/time requests for a port Port date changes post FOC (Firm Order Commitment) Order cancellations	Go to Control Hub and click on PSTN Help link for PSTN technical support.
TAC	Issues with Control Hub functionality Issues with service, such as dropped calls, call quality issues, or service outages	North America: 1-800-553-2447 EMEA: +32 2 704 5555 APAC: +61 2 8446 7411 Email: tac@cisco.com See also: Help with TAC Open a support case
Invoice & Collections	VAT, Payment and other invoicing queries	Contact the Collector on the Invoice via email or phone
Cisco SaaS Support Team (CES)	Quoting Order Booking & Management Provisioning Subscription Management Billing & Invoicing Disputes	Refer Partner Support Playbook and Cisco Calling Plans FAQ Create a case through link below if the required information is not found in the playbook - https://customerservice.cloudapps.cisco.com/

Cisco Calling Plans requirements and limitations

Requirements

Partners must be an authorized Webex Calling partner and have accepted the new Webex Calling addendum through enrollment into the Webex Calling PSTN program.
A minimum of one committed Outbound Calling Plan license must be purchased to enable access to all services associated with Cisco Calling Plans.

Limitations

Cisco Calling Plans are currently available to specified countries.
Existing Webex Calling locations or telephone numbers can only transition to Cisco Calling Plans in certain scenarios. For details on supported migration paths, refer Supported paths for PSTN migration section.
You can order a maximum of 100 new standard phone numbers at a time. Additional numbers can be placed as a separate order.
You can't order block of toll-free numbers.
Cisco Calling Plans aren’t supported with Webex Contact Center or authorized for use in which high-concurrent calls or high-volume calls or uncommonly short or long calls are made. For more information about Webex Contact Center, see Get started with Webex Contact Center.
With the exception of 911 calls, Cisco Calling Plans don't support calls to X11 services including directory service calls.
Some premium services and international destinations may not be available for operational purposes. If specific destinations which are not generally available are required, customers can open a support case to request availability.

Select your PSTN provider

The card view displays the PSTN provider available for the Webex Calling customer before configuring the PSTN location. The PSTN view displays both Providers and Orders.

The provider screen displays the various provider cards with the list of supported service types. The Providers section is classified into the following:

Preferred Calling providers
Certified Calling providers
Calling providers

The providers include the following:

Provider summary
List of locations configured with this provider
List of markets that the provider is available for the supported services.

If the customer has PSTN locations where Calling services aren’t set up, the Select this provider action bar displays. Use this option to configure the service for the PSTN location.

Select the location from the drop-down menu.
Choose the subscription type for the users to use the Cisco Calling plans. Click Next.
Complete the fields for Contract Information and Emergency Service Address configuration.

The PSTN service set up is now complete.

Cisco Calling Plans trials

Each trial account can provision up to 10 standard telephone numbers from Cisco Calling Plans with Webex Calling. It isn’t permitted to provision more than 10 numbers per trial.
Only new, standard telephone numbers are supported in trials. Ported numbers, consecutive blocks, and inbound toll-free numbers aren’t supported on trial accounts. You also cannot port numbers out of a trial. You must convert to a paid account if you wish to use these features.
International calling, along with Premium Service Call types I & II are blocked from use during the trial period.
Business Texting isn’t available on Webex Calling trial accounts.
Trial accounts are intended for technical evaluation purposes only, and not for normal commercial operation. As such, emergency services are only meant for technical evaluation; actual emergency calls can’t be guaranteed. Users shouldn’t place actual emergency service calls on a trial account.

Set up your Cisco Calling Plan

Once your Cisco Calling Plan service is enabled, you can select one of the PSTN options:

Cisco Calling Plans (Cisco PSTN)
Cloud Connected PSTN
Premise-based PSTN (Local Gateway must be enabled separately. For more information, see Configure Premises-based PSTN in Control Hub.)

1	From the customer view in https://admin.webex.com, go to Management > Locations and select the location you want to update.
2	Select the Calling tab and Click Manage next to PTSN Connection.
3	Select Cisco Calling Plans and click Next.
4	Enter the contact information and click Next. This field is for the contact information of the person who will sign the legal contract with Cisco.
5	Enter the Emergency Services Address (ESA), and click Save. By default, the ESA entered here is applied to all phone numbers for this location. You can change the ESA for an individual user if needed. For example, you may need to change the ESA if you have a remote employee who works from home.
6	On the summary screen, do one of the following: Add numbers. Click Done. You can add numbers to your calling plan later.

Order new phone numbers

With the Cisco Calling Plan, you can order new phone numbers directly from Cisco through Control Hub.

Before you begin

The Cisco Calling Plan must be enabled for your site before you can order new phone numbers, including toll-free numbers, through Control Hub.
When requesting new numbers, you can enter specific numbers or a block of consecutive numbers. You can also allow the system to assign numbers from the search inventory based on the country, state, area code, and prefix you select.
By default, the Emergency Service Address (ESA) entered for a location during your Cisco Calling Plan setup applies to all phone numbers for that location.
If the location subscription has the Service Number license, you can add the numbers as a Service Number.
You can modify the existing Standard Number to Service Number in a Cisco Calling Plan location with the Service Number license.
You can move Service Numbers between Cisco Calling Plan locations with the Service Number license.

1	From the customer view in https://admin.webex.com, go to Calling and click Numbers > Add Numbers.
2	Choose a Location in the Add New Numbers page.
3	Choose one of the following options: Regular phone numbers Consecutive number block Toll-free numbers
4	Specify the numbers that you want to order by selecting the Country, State, and the Area Code or City to search by.
5	Select the type of number to order from: Standard Numbers By default, all numbers are added as Standard Numbers. If a number is added to a cart, then the selection isn’t available.
6	Click the numbers that you would like to order, then click Order. The numbers you selected appears in the cart.
7	On the order submission confirmation page, select PSTN Orders to check your order status. The PSTN Orders page displays.
8	Accept the Terms of Service to activate the new numbers. The Terms of Service link is only available to customer administrators. Partners only see a message that the Terms of Service must be signed by the customer.

Order a block of numbers

With the Cisco Calling Plan, you can order blocks of telephone numbers directly from Cisco through Control Hub.

Before you begin

Ordering blocks of numbers is only available for customers with a paid subscription.
The maximum number of block numbers that can be ordered is 100.
Numbers ordered in a block can only be deleted if the entire block is deleted.
By default, the Emergency Service Address (ESA) entered for a location during your Cisco Calling Plan setup is applied to all phone numbers for that location.

1	From the customer view in https://admin.webex.com, go to Calling and click Numbers > Add Numbers.
2	Choose a location and select Order New Numbers, click Next.
3	Select the toggle for Get a Set of Numbers that Follow Each Other in Order.
4	From the drop-down, select the quantity of block numbers needed.
5	Specify State and use either Area Code/Prefix or City as your search criteria, and click Search.
6	Select from the list of available blocks of numbers provided, based on your search criteria, and click Order.
7	On the order submission confirmation page, select the PSTN Orders to check your order status. This brings you to the PSTN Orders page.
8	Accept the Terms of Service to activate the new numbers.

Port phone numbers

As an administrator, you can move existing phone numbers, including toll-free numbers, from your current PSTN to the Cisco Calling Plan option.

Before you begin

We strongly recommend you to read and familiarize yourself with the Cisco Calling Plan Number Porting Guidelines and Policies before you start porting the numbers.

Enable Cisco Calling Plan for your site before you port phone numbers through Control Hub.
A signed Letter of Agency (LOA) is needed, authorizing Cisco to place orders with the current PSTN carrier to move the service to Cisco. The current account owner or authorized signer must sign the LOA. You're prompted to sign the LOA while completing the porting steps.
Ensure you have a recent bill from the last 30 days in PNG or PDF format from your current PSTN provider. While porting, you’re prompted to upload a copy of your bill.
To ensure a successful port, make sure you have the following information ready:
- List of all phone numbers to port
- Current PSTN provider account information
- Customer Service Record (CSR) if available
- Your account PIN if one exists.
When porting numbers and choosing the numbers to port, we recommend that you consider any number that receives inbound calls. See Cisco Calling Plan Number Porting Guidelines and Policies for more information.
By default, the Emergency Service Address (ESA) entered for a location during your Cisco Calling Plan setup is applied to all phone numbers for that location.

1	From the customer view in https://admin.webex.com, go to Calling and click Numbers > Add Numbers.
2	Choose a location and Number Type in the Add New number page.
3	Select Port Numbers Over and click Next.
4	Add the phone number that you want to port over, and then click Save & continue. A portability check is automatically run when you enter the numbers. Highlighted numbers are non portable. PSTN Technical Support supports further review of these instances.
5	You can choose to add the numbers as: Standard Numbers Service Numbers If the Cisco Calling Plan for your location has the Service Number license, you can select Service Number else you can’t select this option. Contact your Partner to allow you to purchase Service Numbers for your subscription.
6	Enter your account information with your current provider. Make sure that the information entered matches your current provider bill. Click Next.
7	Upload a bill from your previous provider. Make sure that the bill is from the last 30 days and is in PNG or PDF format. Click Next.
8	Enter your first and last name and job title to sign the Letter of Agency (LOA). Click Sign & Submit.
9	Review your order and click Next.
10	The order submission screen shows a summary of your port order. Click Done. Control Hub conducts a preliminary error check before you submit a port order. If there are any issues found with a port order, administrators receive an email notification, and an error message appears on the PSTN Orders screen.

Manage PSTN

When placing orders for new numbers or porting existing numbers, you can check the order status or port rejection notices in Control Hub.

A migration banner displays when there are locations to migrate from Non-Integrated CCP to Integrated CCP.

From the customer view in https://admin.webex.com, go to Calling and then click PSTN.

A status is assigned for every order.
Select an order to check its status.

Status values for New Number Orders

Displayed Status	Description

Pending	New numbers order is created by the user.
Provisioned	New numbers are provisioned.
Error	An issue is detected with the new numbers order. Create a TAC ticket to get help.

Status Values for Ported Number Orders

Displayed Status	Description

Pending	User is in the process of creating/filling in details of the Porting Order. Once submitted, the order will still show Pending until Cisco validates and accepts the porting order.
Rejected	Porting issue is detected. See the Porting Errors table for additional details. Alternatively, go to Control Hub and click on the PSTN Help link for PSTN technical support.
Submitted	Porting Order is validated and accepted.
FOC Received	FOC date confirmation from the previous PSTN provider received.
Completed	Porting process is complete.
Canceled	Order is canceled.

Porting Error Messages

Displayed Error	Description	How to fix

Account number mismatch	Account number does not match the number on the Customer Service Record (CSR)	Update the Account Number field on the PSTN Order and resubmit. For some carriers, the account number may be the same as the BTN or the telephone number itself.
Account number required	The account number wasn't provided but is required.	Update the Account Number field on the PSTN Order and resubmit. For some carriers, the account number may be the same as the BTN or the telephone number itself.
Account name mismatch	The person authorizing doesn't match the name on the (CSR).	Update the Authorized name on account field on the PSTN order and resubmit.
BTN mismatch	BTN or ATN does not match that on the CSR.	Update the Carrier billing phone number field on the PSTN Order and resubmit.
Company name mismatch	Entity name does not match that on the CSR.	Update the Company name with previous carrier field on the PSTN order and resubmit.
Multiple BTNs	The OSP requires this Porting Order to be split and submitted as separate orders.	Cancel the current PSTN order and create new, multiple PSTN Orders. Create one for each group of numbers that have the same BTN.
FOC rejected by losing carrier	The FOC date requested cannot be accommodated by the OSP.	Update the Port Complete date field on the PSTN order and resubmit.
Unknown	Go to Control Hub and click on PSTN Help link for PSTN technical support.	Go to Control Hub and click on PSTN Help link for PSTN technical support.
Invalid PIN	Passcode/PIN must be provided for wireless port.	Update the PIN field on the PSTN order and resubmit.
Pending order	The OSP has a pending LSR on the account (for example, a port out or address change).	Remove the telephone numbers in question from the PSTN order and resubmit.
Pending main BTN	BTN is one of the phone numbers being ported. User must indicate Porting Order Type, Remaining Numbers Action, and New Billing Phone Number accordingly.	Remove the main BTN from the list of telephone numbers being ported and resubmit the order. Please include the Main BTN into the last iteration of numbers (if porting numbers in multiple iterations).
Service address mismatch	The location info doesn't match that on the CSR.	Update the Service address, State, and City fields and resubmit the order.
TN has special feature	Some of the phone numbers can't be ported because they have a special feature (for example, remote call forward).	Remove number(s) with special features from the PSTN order and resubmit. Or, unassign special feature from the numbers being ported.
TN mismatch	Some of the phone numbers don't belong to the end user.	Remove the number(s) in question and resubmit the order.
TN not portable	Some of the phone numbers can't be ported because they're inactive or aren't part of the end user's account.	Try to remove the number(s) in question and resubmit the PSTN order.
Unsupported rate center	The rate center isn't portable.	Remove the number(s) in question and resubmit the order.
Zip/postal code mismatch	Postal code doesn't match the one on the CSR.	Update the Zip code field and resubmit the order.
Previous carrier's bill is invalid	The invoice is invalid.	Go to PSTN Order details, then open Previous Carrier’s Bill section. Upload the correct bill file and resubmit the order.
LOA invalid	The LOA is invalid.	Sign the LOA and resubmit the PSTN order. Alternatively, go to Control Hub and click on the PSTN Help link for PSTN technical support.

PSTN – Public Switched Telephone Network

CSR – Customer Service Record

FOC – Firm Order Commitment

OSP – Old Service Provider

BTN – Billing Telephone Number

ATN – Account Telephone Number

Change the emergency service address for a user

1	From the customer view in https://admin.webex.com, go to Users.
2	Select the user you want to modify and click Calling.
3	Select the primary phone number under Directory Numbers.
4	Under Emergency Service Address, select Custom Address.
5	Update the information for the user and click Save.

Change the emergency service address for a location

Once a location is set up with the Cisco Calling Plan, you can update the Emergency Service Address.

1	From the customer view in https://admin.webex.com, go to Management > Locations and select the location you want to update.
2	Next to PSTN Connection, click Manage.
3	Next to the Emergency Service Address, click Edit.
4	Enter the new addres and click Save.

Supported paths for PSTN migration

Use this matrix to know the potential PSTN migration paths for Webex Calling.

Webex Calling supports the following PSTN migration paths:

Using Self Service through Control Hub
- Premises-based PSTN, non-integrated CCPP, and non-integrated IntelePeer to Cisco Calling Plans. See Migrate to Cisco Calling plans.
- Non-integrated CCP to Integrated CCP. See, Migrating from Non-Integrated CCP to Integrated CCP (webex.com)
- Non-integrated CCP Provider including non-integrated Intelepeer to a Premises-based Solution. See, Configure premises-based PSTN in Control Hub
Using Manual Migration
- Premises-based solution to Integrated CCP Provider
- Integrated CCP Provider to Non-integrated CCP Provider (Exception: Non-integrated Intelepeer isn’t supported as the target CCP Provider)
- Integrated CCP Provider to Premises-based Solution

Here’s a list of unsupported PSTN migration paths:

Cisco Calling Plans to integrated Intelepeer
Integrated Intelepeer to Cisco Calling Plans

Your Cisco Calling Plan bill

When your billing begins:

Outbound Calling Plans ordered in CCW begin billing on the requested service date (RSD).
Outbound Calling Plans provisioned in Control Hub begin billing immediately.
Phone numbers provisioned in Control Hub begin billing immediately or, if ported from another provider, will begin billing upon port completion.

Outbound calling plan rates:

Rates for the Outbound Calling Plans and phone numbers are pro-rated using the same proration methord used to calculate the rates for the Webex Calling licenses.
International calling rates vary by country and are billed the month following usage.

Find support for Cisco Calling Plans

Cisco Calling Plans support is provided by various support divisions, depending on your need.

Table 4. Cisco Support Contact Information
Support Division	Purpose	Contact Information
Partner Help Desk (PHD)	Partner how-to and/or documentation inquiries, Pre-quoting Regulatory Tax and other enquiries about the Cisco Calling Plans offering.	North America: 1-844-613-6108 EMEA: +44 129 366 10 20 APAC: +61 3 7017 7272 Email: webexcalling-phd@cisco.com
PSTN Technical Support (PTS)	Partner/Customer PSTN-related questions Port order expedite requests Port date reschedules Port rejections Specific date/time requests for a port Port date changes post FOC (Firm Order Commitment) Order cancellations	Go to Control Hub and click on PSTN Help link for PSTN technical support.
TAC	Issues with Control Hub functionality Issues with service, such as dropped calls, call quality issues, or service outages	North America: 1-800-553-2447 EMEA: +32 2 704 5555 APAC: +61 2 8446 7411 Email: tac@cisco.com See also: Help with TAC Open a support case
Invoice & Collections	VAT, Payment and other invoicing queries	Contact the Collector on the Invoice via email or phone
Cisco SaaS Support Team (CES)	Quoting Order Booking & Management Provisioning Subscription Management Billing & Invoicing Disputes	Refer Partner Support Playbook and Cisco Calling Plans FAQ Create a case through link below if the required information is not found in the playbook - https://customerservice.cloudapps.cisco.com/

Cisco Calling Plans requirements and limitations

Requirements

Partners must be an authorized Webex Calling partner and have accepted the new Webex Calling addendum through enrollment into the Webex Calling PSTN program.
A minimum of one committed Outbound Calling Plan license must be purchased to enable access to all services associated with Cisco Calling Plans.

Limitations

Cisco Calling Plans are currently available to specified countries.
Existing Webex Calling locations or telephone numbers can only transition to Cisco Calling Plans in certain scenarios. For details on supported migration paths, refer Supported paths for PSTN migration section.
You can order a maximum of 100 new standard phone numbers at a time. Additional numbers can be placed as a separate order.
Toll-free numbers aren’t currently available. You can’t order new toll-free numbers or port existing toll-free numbers to the Cisco Calling Plans.
Cisco Calling Plans aren’t supported with Webex Contact Center or authorized for use in which high-concurrent calls or high-volume calls or uncommonly short or long calls are made. For more information about Webex Contact Center, see Get started with Webex Contact Center.
Some premium services and international destinations may not be available for operational purposes. If specific destinations which are not generally available are required, customers can open a support case to request availability.

Select your PSTN provider

The card view displays the PSTN provider available for the Webex Calling customer before configuring the PSTN location. The PSTN view displays both Providers and Orders.

The provider screen displays the various provider cards with the list of supported service types. The Providers section is classified into the following:

Preferred Calling providers
Certified Calling providers
Calling providers

The providers include the following:

Provider summary
List of locations configured with this provider
List of markets that the provider is available for the supported services.

If the customer has PSTN locations where Calling services aren’t set up, the Select this provider action bar displays. Use this option to configure the service for the PSTN location.

Select the location from the drop-down menu.
Choose the subscription type for the users to use the Cisco Calling plans. Click Next.
Complete the fields for Contract Information and Emergency Service Address configuration.

The PSTN service set up is now complete.

Cisco Calling Plans trials

Each trial account can provision up to 10 standard telephone numbers from Cisco Calling Plans with Webex Calling. It isn’t permitted to provision more than 10 numbers per trial.
Only new, standard telephone numbers are supported in trials. Ported numbers, consecutive blocks, and inbound toll-free numbers aren’t supported on trial accounts. You also cannot port numbers out of a trial. You must convert to a paid account if you wish to use these features.
International calling, along with Premium Service Call types I & II are blocked from use during the trial period.
Business Texting isn’t available on Webex Calling trial accounts.
Trial accounts are intended for technical evaluation purposes only, and not for normal commercial operation. As such, emergency services are only meant for technical evaluation; actual emergency calls can’t be guaranteed. Users shouldn’t place actual emergency service calls on a trial account.

Set up your Cisco Calling Plan

Once your Cisco Calling Plan service is enabled, you can select one of the PSTN options:

Cisco Calling Plans (Cisco PSTN)
Cloud Connected PSTN
Premise-based PSTN (Local Gateway must be enabled separately. For more information, see Configure Premises-based PSTN in Control Hub.)

1	From the customer view in https://admin.webex.com, go to Management > Locations and select the location you want to update.
2	Select the Calling tab and Click Manage next to PTSN Connection.
3	Select Cisco Calling Plans and click Next.
4	Enter the contact information and click Next. This field is for the contact information of the person who will sign the legal contract with Cisco.
5	Enter the Emergency Services Address (ESA), and click Save. By default, the ESA entered here is applied to all phone numbers for this location. You can change the ESA for an individual user if needed. For example, you may need to change the ESA if you have a remote employee who works from home.
6	On the summary screen, do one of the following: Add numbers. Click Done. You can add numbers to your calling plan later.

Order new phone numbers

Before you begin

Enable the Cisco Calling Plan for your site before you order new phone numbers through Control Hub.
By default, the Emergency Service Address (ESA) entered for a location during your Cisco Calling Plan setup is applied to all phone numbers for that location.
Provide the following information for business identity verification:
- First name and last name of the legal representative
- Contact phone number
- Company name
- Local company registration certificate
Provide the following information for address verification:
- Address matching the DID area code (street, building number, postal code, city, and country)
- Proof of address, not older than last three months

Additionally, you must submit a copy of your passport or ID card in the Netherlands, Switzerland, Poland, Greece, and Lithuania. You must provide VAT ID in Sweden and Greece.

1	From the customer view in https://admin.webex.com, go to Calling and then click Numbers > Add Numbers.
2	Choose a location and click Select under Order new numbers. Click Next. You’re directed to Contact Support to order a new numbers.
3	Click Contact Support. Your location information is automatically populated on the Case Details window.
4	Indicate how many new numbers you’re requesting in the Number of Telephone Numbers Requested field.
5	From the Number Type drop-down list, choose Local or National as the case maybe.
6	(Optional) Enter the additional details.
7	Click Submit. You receive a PSTN Order Number which displays on the PSTN order page. It can take up to five to seven business days for the ordering and document approval process.

Port phone numbers

Before you begin

We strongly recommend you to read and familiarize yourself with the Cisco Calling Plan Number Porting Guidelines and Policies before you start porting the numbers.

Enable Cisco Calling Plan for your location before you port phone numbers through Control Hub.
A signed Letter of Agency (LOA) is needed, authorizing Cisco to place orders with the current PSTN carrier to move the service to Cisco. The LOA must be signed by the current account owner or authorized signer. You're prompted to sign the LOA while completing the porting steps.
Make sure you have a recent bill in PNG or PDF format from your current PSTN provider. The bill must not be older than 30 days. While completing the porting steps, you’re prompted to upload a copy of your bill.
For successful porting, ensure that you have the following information ready:
- List of all phone numbers to port (non-toll free)
- Current PSTN provider account information
- Customer Service Record (CSR) if available
- Your account PIN if one exists
- VAT number or Tax ID
When planning for which numbers to port, we recommend that you consider any number that receives inbound calls. See Cisco Calling Plan Number Policy for more information.
By default, the Emergency Service Address (ESA) entered for a location during your Cisco Calling Plan setup is applied to all phone numbers for that location.

As an administrator, you can move existing phone numbers from your current PSTN to the Cisco Calling Plan option. The following are the types of porting services:

Standard port: When a phone number moves from one service provider to another, without any special circumstances. For example, porting a number from Carrier A to Carrier B within the same country and service area is a Standard port.
Mixed operator port: A more complex porting situation that involves multiple operators or service providers. For example, porting a range of numbers in a block that belongs to two or more network operators is a Mixed operator port.

Porting of numbers is done in a fixed time slot in the following countries:

Porting time slot	Countries
Monday to Friday between 8 a.m. to 3 p.m.	Switzerland, Belgium, Sweden
Monday to Friday between 9 a.m. to 4 p.m.	Netherlands, Lithuania, Luxembourg, Denmark
Monday to Friday between 8 a.m. to 5 p.m.	Finland

Requests for porting out of hours are on a case-by-case basis and depend on the carriers involved. We can’t guarantee that out of hours porting is available.

1	From the customer view in https://admin.webex.com, go to Calling and click Numbers > Add Numbers.
2	Choose a location and click Select under Port numbers over. Click Next.
3	Add the phone numbers that you want to port, and then click Save & continue.
4	Enter the Date and Time by when you want the porting to finish. The schedule is set based on your preference. But it’s not guaranteed that the porting of your numbers is finished at the exact date and time selected.
5	(Optional) Enter an additional email address, other than the default contact listed, to receive notifications regarding the port order status.
6	Click Next.
7	Enter your current carrier account information in the fields provided. Make sure this matches the information on your previous carrier’s bill.
8	Click Next.
9	Upload your previous carrier bill (not older than 30 days).
10	Click Next.
11	Upload the LOA. The authorized contact for your previous carrier’s account needs to upload the signed LOA. Open a ticket with Webex Partner Help Center to get the LOA required for your country and upload the signed copy here. If you're not the authorized contact, skip this step for now. That person can come back and upload the signed LOA later, we’ll send your order contacts a reminder.
12	Click Save & continue.
13	Your Port Order is submitted. You can check the order status in PSTN Orders.
14	Click Done. Our support team contacts you for any additional documents requirements to complete your porting request. You can upload the requested documents in the right-hand panel of the order. The Firm Order Commitment (FOC) date can be two business days later from the submission date. An FOC is the date on which the losing carrier states that it releases a phone number to the winning carrier. After the losing carrier confirms the porting request, you can cancel or postpone the porting request as per the following rules: These timeframes are estimates and aren’t bound by any SLA. You can cancel or reschedule a standard porting operation to five working days before the porting date. You can cancel or reschedule a mixed operator porting operation to seven working days before the porting date. If porting takes place and you need to roll back the numbers to the previous carrier, raise such requests with the PTS team at the earliest. Rollbacks aren’t always possible and may require placing a port back request with the previous carrier.

Manage PSTN

When placing orders for new numbers or porting existing numbers, you can check the order status or port rejection notices in Control Hub.

A migration banner is displayed when there are locations which need to be migrated from Non-Integrated CCP to Integrated CCP.

From the customer view in https://admin.webex.com, go to Calling and click PSTN.

Every order submitted has a status value.
Select an order to check its status.

Status Values for New Number Orders

Displayed Status	Description

Pending	A New numbers order has been created by the user.
Provisioned	New numbers are provisioned.
Error	An issue is detected with the new numbers order. Create a TAC ticket to get help.
Action Required	Click to contact PTS for assistance.

Status Values for Ported Number Orders

Displayed Status	Description

Pending	User is in the process of creating/filling in details of the Porting Order. Once submitted, the order will still show Pending until Cisco validates and accepts the porting order.
Rejected	Porting issue is detected. See the Porting Errors table for additional details. If required, go to Control Hub and click on the PSTN Help link for PSTN technical support.
Submitted	Porting Order is validated and accepted.
FOC Received	FOC date confirmation from the previous PSTN provider received.
Completed	Porting process is complete.
Canceled	Order is canceled.

Porting Error Messages

Displayed Error	Description	How to fix

Account number mismatch	Account number doesn’t match the number on the Customer Service Record (CSR)	Update the Account Number field on the PSTN Order and resubmit. For some carriers, the account number may be the same as the BTN or the telephone number itself.
Account number required	The account number wasn't provided but is required.	Update the Account Number field on the PSTN Order and resubmit. For some carriers, the account number may be the same as the BTN or the telephone number itself.
Account name mismatch	The person authorizing doesn't match the name on the (CSR).	Update the Authorized name on account field on the PSTN order and resubmit.
BTN mismatch	BTN or ATN doesn’t match that on the CSR.	Update the Carrier billing phone number field on the PSTN Order and resubmit.
Company name mismatch	Entity name does not match that on the CSR.	Update the Company name with previous carrier field on the PSTN order and resubmit.
Multiple BTNs	The OSP requires this Porting Order to be split and submitted as separate orders.	Cancel the current PSTN order and create a new, multiple PSTN Orders. Create one for each group of numbers that have the same BTN.
FOC rejected by losing carrier	The FOC date requested can’t be accommodated by the OSP.	Update the Port Complete date field on the PSTN order and resubmit.
Unknown	Go to Control Hub and click on the PSTN Help link for PSTN technical support.	Go to Control Hub and click on the PSTN Help link for PSTN technical support.
Invalid PIN	Passcode/PIN must be provided for wireless port.	Update the PIN field on the PSTN order and resubmit.
Pending order	The OSP has a pending LSR on the account (for example, a port out or address change).	Remove the telephone numbers in question from the PSTN order and resubmit.
Pending main BTN	BTN is one of the phone numbers being ported. User must indicate Porting Order Type, Remaining Numbers Action, and New Billing Phone Number accordingly.	Remove the main BTN from the list of telephone numbers being ported and resubmit the order. Include the Main BTN into the last iteration of numbers (if porting numbers in multiple iterations).
Service address mismatch	The location info doesn't match that on the CSR.	Update the Service address, State, and City fields and resubmit the order.
TN has special feature	Some of the phone numbers can't be ported because they have a special feature (for example, remote call forward).	Remove numbers with special features from the PSTN order and resubmit. Or, unassign a special features from the numbers being ported.
TN mismatch	Some of the phone numbers don't belong to the end user.	Remove one or more numbers in question and resubmit the order.
TN not portable	Some of the phone numbers can't be ported because they're inactive or aren't part of the end user's account.	Try to remove one or more numbers in question and resubmit the PSTN order.
Unsupported rate center	The rate center isn't portable.	Remove one or more numbers in question and resubmit the order.
Zip/postal code mismatch	Postal code doesn't match the one on the CSR.	Update the Zip code field and resubmit the order.
Previous carrier's bill is invalid	The invoice is invalid.	Go to PSTN Order details, then open Previous Carrier’s Bill section. Upload the correct bill file and resubmit the order.
LOA invalid	The LOA is invalid.	Sign the LOA and resubmit the PSTN order. Alternatively, go to Control Hub and click on the PSTN Help link for PSTN technical support.

PSTN – Public Switched Telephone Network

CSR – Customer Service Record

FOC – Firm Order Commitment

OSP – Old Service Provider

BTN – Billing Telephone Number

ATN – Account Telephone Number

Change the emergency service address for a user

1	From the customer view in https://admin.webex.com, go to Users.
2	Select the user you want to modify and click Calling.
3	Select the primary phone number under Directory Numbers.
4	Under Emergency Service Address, select Custom Address.
5	Update the information for the user and click Save.

Change the emergency service address for a location

Once a location is set up with the Cisco Calling Plan, you can update the Emergency Service Address.

1	From the customer view in https://admin.webex.com, go to Management > Locations and select the location you want to update.
2	Next to PSTN Connection, click Manage.
3	Next to the Emergency Service Address, click Edit.
4	Enter the new addres and click Save.

Supported paths for PSTN migration

Use this matrix to know the potential PSTN migration paths for Webex Calling.

Webex Calling supports the following PSTN migration paths:

Using Self Service through Control Hub
- Premises-based PSTN, non-integrated CCPP, and non-integrated IntelePeer to Cisco Calling Plans. See Migrate to Cisco Calling plans.
- Non-integrated CCP to Integrated CCP. See, Migrating from Non-Integrated CCP to Integrated CCP (webex.com)
- Non-integrated CCP Provider including non-integrated Intelepeer to a Premises-based Solution. See, Configure premises-based PSTN in Control Hub
Using Manual Migration
- Premises-based solution to Integrated CCP Provider
- Integrated CCP Provider to Non-integrated CCP Provider (Exception: Non-integrated Intelepeer isn’t supported as the target CCP Provider)
- Integrated CCP Provider to Premises-based Solution

Here’s a list of unsupported PSTN migration paths:

Cisco Calling Plans to integrated Intelepeer
Integrated Intelepeer to Cisco Calling Plans

Your Cisco Calling Plan bill

When your billing begins:

Outbound Calling Plans ordered in CCW begin billing on the requested service date (RSD).
Outbound Calling Plans provisioned in Control Hub begin billing immediately.
Phone numbers provisioned in Control Hub begin billing immediately or, if ported from another provider, will begin billing upon port completion.

Outbound calling plan rates:

Rates for the Outbound Calling Plans and phone numbers are pro-rated using the same proration methord used to calculate the rates for the Webex Calling licenses.
International calling rates vary by country and are billed the month following usage.

Find support for Cisco Calling Plans

Cisco Calling Plans support is provided by various support divisions, depending on your need.

Table 6. Cisco Support Contact Information
Support Division	Purpose	Contact Information
Partner Help Desk (PHD)	Partner how-to and/or documentation inquiries, Pre-quoting Regulatory Tax and other enquiries about the Cisco Calling Plans offering.	North America: 1-844-613-6108 EMEA: +44 129 366 10 20 APAC: +61 3 7017 7272 Email: webexcalling-phd@cisco.com
PSTN Technical Support (PTS)	Partner/Customer PSTN-related questions Port order expedite requests Port date reschedules Port rejections Specific date/time requests for a port Port date changes post FOC (Firm Order Commitment) Order cancellations	Go to Control Hub and click on PSTN Help link for PSTN technical support.
TAC	Issues with Control Hub functionality Issues with service, such as dropped calls, call quality issues, or service outages	North America: 1-800-553-2447 EMEA: +32 2 704 5555 APAC: +61 2 8446 7411 Email: tac@cisco.com See also: Help with TAC Open a support case
Invoice & Collections	VAT, Payment and other invoicing queries	Contact the Collector on the Invoice via email or phone
Cisco SaaS Support Team (CES)	Quoting Order Booking & Management Provisioning Subscription Management Billing & Invoicing Disputes	Refer Partner Support Playbook and Cisco Calling Plans FAQ Create a case through link below if the required information is not found in the playbook - https://customerservice.cloudapps.cisco.com/

Cisco Calling Plans requirements and limitations

Requirements

Partners must be an authorized Webex Calling partner and have accepted the new Webex Calling addendum through enrollment into the Webex Calling PSTN program.
A minimum of one committed Outbound Calling Plan license must be purchased to enable access to all services associated with Cisco Calling Plans.

Limitations

Cisco Calling Plans are currently available to specified countries.
Existing Webex Calling locations or telephone numbers can only transition to Cisco Calling Plans in certain scenarios. For details on supported migration paths, refer Supported paths for PSTN migration section.
You can order a maximum of 100 new standard phone numbers at a time. Additional numbers can be placed as a separate order.
Toll-free numbers aren’t currently available. You can’t order new toll-free numbers or port existing toll-free numbers to the Cisco Calling Plans.
Cisco Calling Plans aren’t supported with Webex Contact Center or authorized for use in which high-concurrent calls or high-volume calls or uncommonly short or long calls are made. For more information about Webex Contact Center, see Get started with Webex Contact Center.
Some premium services and international destinations may not be available for operational purposes. If specific destinations which are not generally available are required, customers can open a support case to request availability.

Select your PSTN provider

The card view displays the PSTN provider available for the Webex Calling customer before configuring the PSTN location. The PSTN view displays both Providers and Orders.

The provider screen displays the various provider cards with the list of supported service types. The Providers section is classified into the following:

Preferred Calling providers
Certified Calling providers
Calling providers

The providers include the following:

Provider summary
List of locations configured with this provider
List of markets that the provider is available for the supported services.

If the customer has PSTN locations where Calling services aren’t set up, the Select this provider action bar displays. Use this option to configure the service for the PSTN location.

Select the location from the drop-down menu.
Choose the subscription type for the users to use the Cisco Calling plans. Click Next.
Complete the fields for Contract Information and Emergency Service Address configuration.

The PSTN service set up is now complete.

Cisco Calling Plans trials

Each trial account can provision up to 10 standard telephone numbers from Cisco Calling Plans with Webex Calling. It isn’t permitted to provision more than 10 numbers per trial.
Only new, standard telephone numbers are supported in trials. Ported numbers, consecutive blocks, and inbound toll-free numbers aren’t supported on trial accounts. You also cannot port numbers out of a trial. You must convert to a paid account if you wish to use these features.
International calling, along with Premium Service Call types I & II are blocked from use during the trial period.
Business Texting isn’t available on Webex Calling trial accounts.
Trial accounts are intended for technical evaluation purposes only, and not for normal commercial operation. As such, emergency services are only meant for technical evaluation; actual emergency calls can’t be guaranteed. Users shouldn’t place actual emergency service calls on a trial account.

Set up your Cisco Calling Plan

Once your Cisco Calling Plan service is enabled, you can select one of the PSTN options:

Cisco Calling Plans (Cisco PSTN)
Cloud Connected PSTN
Premise-based PSTN (Local Gateway must be enabled separately. For more information, see Configure Premises-based PSTN in Control Hub.)

1	From the customer view in https://admin.webex.com, go to Management > Locations and select the location you want to update.
2	Select the Calling tab and Click Manage next to PTSN Connection.
3	Select Cisco Calling Plans and click Next.
4	Enter the contact information and click Next. This field is for the contact information of the person who will sign the legal contract with Cisco.
5	Enter the Emergency Services Address (ESA), and click Save. By default, the ESA entered here is applied to all phone numbers for this location. You can change the ESA for an individual user if needed. For example, you may need to change the ESA if you have a remote employee who works from home.
6	On the summary screen, do one of the following: Add numbers. Click Done. You can add numbers to your calling plan later.

Order new phone numbers

Before you begin

Enable the Cisco Calling Plan for your site before you order new phone numbers through Control Hub.
By default, the Emergency Service Address (ESA) entered for a location during your Cisco Calling Plan setup is applied to all phone numbers for that location.
Provide the following information for business identity verification:
- First name and last name of the legal representative
- Contact phone number
- Company name
- Local company registration certificate
Provide the following information for address verification:
- Address matching the DID area code (street, building number, postal code, city, and country)
- Proof of address, not older than last three months

Additionally, you must submit a copy of your passport or ID card in the Netherlands, Switzerland, Poland, Greece, and Lithuania. You must provide VAT ID in Sweden and Greece.

1	From the customer view in https://admin.webex.com, go to Calling and then click Numbers > Add Numbers.
2	Choose a location and click Select under Order new numbers. Click Next. You’re directed to Contact Support to order a new numbers.
3	Click Contact Support. Your location information is automatically populated on the Case Details window.
4	Indicate how many new numbers you’re requesting in the Number of Telephone Numbers Requested field.
5	From the Number Type drop-down list, choose Local or National as the case maybe.
6	(Optional) Enter the additional details.
7	Click Submit. You receive a PSTN Order Number which displays on the PSTN order page. It can take up to five to seven business days for the ordering and document approval process.

Port phone numbers

Before you begin

We strongly recommend you to read and familiarize yourself with the Cisco Calling Plan Number Porting Guidelines and Policies before you start porting the numbers.

Enable Cisco Calling Plan for your location before you port phone numbers through Control Hub.
A signed Letter of Agency (LOA) is needed, authorizing Cisco to place orders with the current PSTN carrier to move the service to Cisco. The LOA must be signed by the current account owner or authorized signer. You're prompted to sign the LOA while completing the porting steps.
Make sure you have a recent bill in PNG or PDF format from your current PSTN provider. The bill must not be older than 30 days. While completing the porting steps, you’re prompted to upload a copy of your bill.
For successful porting, ensure that you have the following information ready:
- List of all phone numbers to port (non-toll free)
- Current PSTN provider account information
- Customer Service Record (CSR) if available
- Your account PIN if one exists
- VAT number or Tax ID
When planning for which numbers to port, we recommend that you consider any number that receives inbound calls. See Cisco Calling Plan Number Policy for more information.
By default, the Emergency Service Address (ESA) entered for a location during your Cisco Calling Plan setup is applied to all phone numbers for that location.

As an administrator, you can move existing phone numbers from your current PSTN to the Cisco Calling Plan option. The following are the types of porting services:

Standard port: When a phone number moves from one service provider to another, without any special circumstances. For example, porting a number from Carrier A to Carrier B within the same country and service area is a Standard port.
Mixed operator port: A more complex porting situation that involves multiple operators or service providers. For example, porting a range of numbers in a block that belongs to two or more network operators is a Mixed operator port.

Porting of numbers is done in a fixed time slot in the following countries:

Porting time slot	Countries
Monday to Friday between 8 a.m. to 3 p.m.	Switzerland, Belgium, Sweden
Monday to Friday between 9 a.m. to 4 p.m.	Netherlands, Lithuania, Luxembourg, Denmark
Monday to Friday between 8 a.m. to 5 p.m.	Finland

Requests for porting out of hours are on a case-by-case basis and depend on the carriers involved. We can’t guarantee that out of hours porting is available.

1	From the customer view in https://admin.webex.com, go to Calling and click Numbers > Add Numbers.
2	Choose a location and click Select under Port numbers over. Click Next.
3	Add the phone numbers that you want to port, and then click Save & continue.
4	Enter the Date and Time by when you want the porting to finish. The schedule is set based on your preference. But it’s not guaranteed that the porting of your numbers is finished at the exact date and time selected.
5	(Optional) Enter an additional email address, other than the default contact listed, to receive notifications regarding the port order status.
6	Click Next.
7	Enter your current carrier account information in the fields provided. Make sure this matches the information on your previous carrier’s bill.
8	Click Next.
9	Upload your previous carrier bill (not older than 30 days).
10	Click Next.
11	Upload the LOA. The authorized contact for your previous carrier’s account needs to upload the signed LOA. Open a ticket with Webex Partner Help Center to get the LOA required for your country and upload the signed copy here. If you're not the authorized contact, skip this step for now. That person can come back and upload the signed LOA later, we’ll send your order contacts a reminder.
12	Click Save & continue.
13	Your Port Order is submitted. You can check the order status in PSTN Orders.
14	Click Done. Our support team contacts you for any additional documents requirements to complete your porting request. You can upload the requested documents in the right-hand panel of the order. The Firm Order Commitment (FOC) date can be two business days later from the submission date. An FOC is the date on which the losing carrier states that it releases a phone number to the winning carrier. After the losing carrier confirms the porting request, you can cancel or postpone the porting request as per the following rules: These timeframes are estimates and aren’t bound by any SLA. You can cancel or reschedule a standard porting operation to five working days before the porting date. You can cancel or reschedule a mixed operator porting operation to seven working days before the porting date. If porting takes place and you need to roll back the numbers to the previous carrier, raise such requests with the PTS team at the earliest. Rollbacks aren’t always possible and may require placing a port back request with the previous carrier.

Manage PSTN

When placing orders for new numbers or porting existing numbers, you can check the order status or port rejection notices in Control Hub.

A migration banner is displayed when there are locations which need to be migrated from Non-Integrated CCP to Integrated CCP.

From the customer view in https://admin.webex.com, go to Calling and click PSTN.

Every order submitted has a status value.
Select an order to check its status.

Status Values for New Number Orders

Displayed Status	Description

Pending	A New numbers order has been created by the user.
Provisioned	New numbers are provisioned.
Error	An issue is detected with the new numbers order. Create a TAC ticket to get help.
Action Required	Click to contact PTS for assistance.

Status Values for Ported Number Orders

Displayed Status	Description

Pending	User is in the process of creating/filling in details of the Porting Order. Once submitted, the order will still show Pending until Cisco validates and accepts the porting order.
Rejected	Porting issue is detected. See the Porting Errors table for additional details. If required, go to Control Hub and click on the PSTN Help link for PSTN technical support.
Submitted	Porting Order is validated and accepted.
FOC Received	FOC date confirmation from the previous PSTN provider received.
Completed	Porting process is complete.
Canceled	Order is canceled.

Porting Error Messages

Displayed Error	Description	How to fix

Account number mismatch	Account number doesn’t match the number on the Customer Service Record (CSR)	Update the Account Number field on the PSTN Order and resubmit. For some carriers, the account number may be the same as the BTN or the telephone number itself.
Account number required	The account number wasn't provided but is required.	Update the Account Number field on the PSTN Order and resubmit. For some carriers, the account number may be the same as the BTN or the telephone number itself.
Account name mismatch	The person authorizing doesn't match the name on the (CSR).	Update the Authorized name on account field on the PSTN order and resubmit.
BTN mismatch	BTN or ATN doesn’t match that on the CSR.	Update the Carrier billing phone number field on the PSTN Order and resubmit.
Company name mismatch	Entity name does not match that on the CSR.	Update the Company name with previous carrier field on the PSTN order and resubmit.
Multiple BTNs	The OSP requires this Porting Order to be split and submitted as separate orders.	Cancel the current PSTN order and create a new, multiple PSTN Orders. Create one for each group of numbers that have the same BTN.
FOC rejected by losing carrier	The FOC date requested can’t be accommodated by the OSP.	Update the Port Complete date field on the PSTN order and resubmit.
Unknown	Go to Control Hub and click on the PSTN Help link for PSTN technical support.	Go to Control Hub and click on the PSTN Help link for PSTN technical support.
Invalid PIN	Passcode/PIN must be provided for wireless port.	Update the PIN field on the PSTN order and resubmit.
Pending order	The OSP has a pending LSR on the account (for example, a port out or address change).	Remove the telephone numbers in question from the PSTN order and resubmit.
Pending main BTN	BTN is one of the phone numbers being ported. User must indicate Porting Order Type, Remaining Numbers Action, and New Billing Phone Number accordingly.	Remove the main BTN from the list of telephone numbers being ported and resubmit the order. Include the Main BTN into the last iteration of numbers (if porting numbers in multiple iterations).
Service address mismatch	The location info doesn't match that on the CSR.	Update the Service address, State, and City fields and resubmit the order.
TN has special feature	Some of the phone numbers can't be ported because they have a special feature (for example, remote call forward).	Remove numbers with special features from the PSTN order and resubmit. Or, unassign a special features from the numbers being ported.
TN mismatch	Some of the phone numbers don't belong to the end user.	Remove one or more numbers in question and resubmit the order.
TN not portable	Some of the phone numbers can't be ported because they're inactive or aren't part of the end user's account.	Try to remove one or more numbers in question and resubmit the PSTN order.
Unsupported rate center	The rate center isn't portable.	Remove one or more numbers in question and resubmit the order.
Zip/postal code mismatch	Postal code doesn't match the one on the CSR.	Update the Zip code field and resubmit the order.
Previous carrier's bill is invalid	The invoice is invalid.	Go to PSTN Order details, then open Previous Carrier’s Bill section. Upload the correct bill file and resubmit the order.
LOA invalid	The LOA is invalid.	Sign the LOA and resubmit the PSTN order. Alternatively, go to Control Hub and click on the PSTN Help link for PSTN technical support.

PSTN – Public Switched Telephone Network

CSR – Customer Service Record

FOC – Firm Order Commitment

OSP – Old Service Provider

BTN – Billing Telephone Number

ATN – Account Telephone Number

Change the emergency service address for a user

1	From the customer view in https://admin.webex.com, go to Users.
2	Select the user you want to modify and click Calling.
3	Select the primary phone number under Directory Numbers.
4	Under Emergency Service Address, select Custom Address.
5	Update the information for the user and click Save.

Change the emergency service address for a location

Once a location is set up with the Cisco Calling Plan, you can update the Emergency Service Address.

1	From the customer view in https://admin.webex.com, go to Management > Locations and select the location you want to update.
2	Next to PSTN Connection, click Manage.
3	Next to the Emergency Service Address, click Edit.
4	Enter the new addres and click Save.

Your Cisco Calling Plan bill

When your billing begins:

Outbound Calling Plans ordered in CCW begin billing on the requested service date (RSD).
Outbound Calling Plans provisioned in Control Hub begin billing immediately.
Phone numbers provisioned in Control Hub begin billing immediately or, if ported from another provider, will begin billing upon port completion.

Outbound calling plan rates:

Rates for the Outbound Calling Plans and phone numbers are pro-rated using the same proration methord used to calculate the rates for the Webex Calling licenses.
International calling rates vary by country and are billed the month following usage.

Supported paths for PSTN migration

Use this matrix to know the potential PSTN migration paths for Webex Calling.

Webex Calling supports the following PSTN migration paths:

Using Self Service through Control Hub
- Premises-based PSTN, non-integrated CCPP, and non-integrated IntelePeer to Cisco Calling Plans. See Migrate to Cisco Calling plans.
- Non-integrated CCP to Integrated CCP. See, Migrating from Non-Integrated CCP to Integrated CCP (webex.com)
- Non-integrated CCP Provider including non-integrated Intelepeer to a Premises-based Solution. See, Configure premises-based PSTN in Control Hub
Using Manual Migration
- Premises-based solution to Integrated CCP Provider
- Integrated CCP Provider to Non-integrated CCP Provider (Exception: Non-integrated Intelepeer isn’t supported as the target CCP Provider)
- Integrated CCP Provider to Premises-based Solution

Here’s a list of unsupported PSTN migration paths:

Cisco Calling Plans to integrated Intelepeer
Integrated Intelepeer to Cisco Calling Plans

Find support for Cisco Calling Plans

Cisco Calling Plans support is provided by various support divisions, depending on your need.

Table 8. Cisco Support Contact Information
Support Division	Purpose	Contact Information
Partner Help Desk (PHD)	Partner how-to and/or documentation inquiries, Pre-quoting Regulatory Tax and other enquiries about the Cisco Calling Plans offering.	North America: 1-844-613-6108 EMEA: +44 129 366 10 20 APAC: +61 3 7017 7272 Email: webexcalling-phd@cisco.com
PSTN Technical Support (PTS)	Partner/Customer PSTN-related questions Port order expedite requests Port date reschedules Port rejections Specific date/time requests for a port Port date changes post FOC (Firm Order Commitment) Order cancellations	Go to Control Hub and click on PSTN Help link for PSTN technical support.
TAC	Issues with Control Hub functionality Issues with service, such as dropped calls, call quality issues, or service outages	North America: 1-800-553-2447 EMEA: +32 2 704 5555 APAC: +61 2 8446 7411 Email: tac@cisco.com See also: Help with TAC Open a support case
Invoice & Collections	VAT, Payment and other invoicing queries	Contact the Collector on the Invoice via email or phone
Cisco SaaS Support Team (CES)	Quoting Order Booking & Management Provisioning Subscription Management Billing & Invoicing Disputes	Refer Partner Support Playbook and Cisco Calling Plans FAQ Create a case through link below if the required information is not found in the playbook - https://customerservice.cloudapps.cisco.com/

Cisco Calling Plans requirements and limitations

Requirements

Partners must be an authorized Webex Calling partner and have accepted the new Webex Calling addendum through enrollment into the Webex Calling PSTN program.
A minimum of one committed Outbound Calling Plan license must be purchased to enable access to all services associated with Cisco Calling Plans.

Limitations

Cisco Calling Plans are currently available to specified countries.
Existing Webex Calling locations or telephone numbers can only transition to Cisco Calling Plans in certain scenarios. For details on supported migration paths, refer Supported paths for PSTN migration section.
You can order a maximum of 100 new standard phone numbers at a time. Additional numbers can be placed as a separate order.
Toll-free numbers aren’t currently available. You can’t order new toll-free numbers or port existing toll-free numbers to the Cisco Calling Plans.
Cisco Calling Plans aren’t supported with Webex Contact Center or authorized for use in which high-concurrent calls or high-volume calls or uncommonly short or long calls are made. For more information about Webex Contact Center, see Get started with Webex Contact Center.
Some premium services and international destinations may not be available for operational purposes. If specific destinations which are not generally available are required, customers can open a support case to request availability.

Select your PSTN provider

The card view displays the PSTN provider available for the Webex Calling customer before configuring the PSTN location. The PSTN view displays both Providers and Orders.

The provider screen displays the various provider cards with the list of supported service types. The Providers section is classified into the following:

Preferred Calling providers
Certified Calling providers
Calling providers

The providers include the following:

Provider summary
List of locations configured with this provider
List of markets that the provider is available for the supported services.

If the customer has PSTN locations where Calling services aren’t set up, the Select this provider action bar displays. Use this option to configure the service for the PSTN location.

Select the location from the drop-down menu.
Choose the subscription type for the users to use the Cisco Calling plans. Click Next.
Complete the fields for Contract Information and Emergency Service Address configuration.

The PSTN service set up is now complete.

Cisco Calling Plans trials

Each trial account can provision up to 10 standard telephone numbers from Cisco Calling Plans with Webex Calling. It isn’t permitted to provision more than 10 numbers per trial.
Only new, standard telephone numbers are supported in trials. Ported numbers, consecutive blocks, and inbound toll-free numbers aren’t supported on trial accounts. You also cannot port numbers out of a trial. You must convert to a paid account if you wish to use these features.
International calling, along with Premium Service Call types I & II are blocked from use during the trial period.
Business Texting isn’t available on Webex Calling trial accounts.
Trial accounts are intended for technical evaluation purposes only, and not for normal commercial operation. As such, emergency services are only meant for technical evaluation; actual emergency calls can’t be guaranteed. Users shouldn’t place actual emergency service calls on a trial account.

Set up your Cisco Calling Plan

Once your Cisco Calling Plan service is enabled, you can select one of the PSTN options:

Cisco Calling Plans (Cisco PSTN)
Cloud Connected PSTN
Premise-based PSTN (Local Gateway must be enabled separately. For more information, see Configure Premises-based PSTN in Control Hub.)

1	From the customer view in https://admin.webex.com, go to Management > Locations and select the location you want to update.
2	Select the Calling tab and Click Manage next to PTSN Connection.
3	Select Cisco Calling Plans and click Next.
4	Enter the contact information and click Next. This field is for the contact information of the person who will sign the legal contract with Cisco.
5	Enter the Emergency Services Address (ESA), and click Save. By default, the ESA entered here is applied to all phone numbers for this location. You can change the ESA for an individual user if needed. For example, you may need to change the ESA if you have a remote employee who works from home.
6	On the summary screen, do one of the following: Add numbers. Click Done. You can add numbers to your calling plan later.

Order new phone numbers

Before you begin

Enable the Cisco Calling Plan for your site before you order new phone numbers through Control Hub.
By default, the Emergency Service Address (ESA) entered for a location during your Cisco Calling Plan setup is applied to all phone numbers for that location.
Provide the following information for business identity verification:
- First name and last name of the legal representative
- Contact phone number
- Company name
- Local company registration certificate
Provide the following information for address verification:
- Address matching the DID area code (street, building number, postal code, city, and country)
- Proof of address, not older than last three months

Additionally, you must submit a copy of your passport or ID card in the Netherlands, Switzerland, Poland, Greece, and Lithuania. You must provide VAT ID in Sweden and Greece.

1	From the customer view in https://admin.webex.com, go to Calling and then click Numbers > Add Numbers.
2	Choose a location and click Select under Order new numbers. Click Next. You’re directed to Contact Support to order a new numbers.
3	Click Contact Support. Your location information is automatically populated on the Case Details window.
4	Indicate how many new numbers you’re requesting in the Number of Telephone Numbers Requested field.
5	From the Number Type drop-down list, choose Local or National as the case maybe.
6	(Optional) Enter the additional details.
7	Click Submit. You receive a PSTN Order Number which displays on the PSTN order page. It can take up to five to seven business days for the ordering and document approval process.

Port phone numbers

Before you begin

We strongly recommend you to read and familiarize yourself with the Cisco Calling Plan Number Porting Guidelines and Policies before you start porting the numbers.

Enable Cisco Calling Plan for your location before you port phone numbers through the Control Hub.
A signed Letter of Agency (LOA) is needed, authorizing Cisco to place orders with the current PSTN carrier to move the service to Cisco. The LOA must be signed by the current account owner or authorized signer. You're prompted to sign the LOA while completing the porting steps.
Make sure you have a recent bill in PNG or PDF format from your current PSTN provider. The bill must not be older than 30 days. While completing the porting steps, you’re prompted to upload a copy of your bill.
Provide proof of address that isn’t older than three months. Any national address is accepted.
Provide RIO code and SIRET code.
For successful porting, ensure that you have the following information ready:
- List of all phone numbers to port (non-toll free).
- Current PSTN provider account information.
- Customer Service Record (CSR) if available.
- Your account PIN if one exists.
Additional information may be required depending on your country.
When planning for which numbers to port, we recommend that you consider any number that receives inbound calls. See Cisco Calling Plan Number Porting Guidelines and Policies for more information.
By default, the Emergency Service Address (ESA) entered for a location during your Cisco Calling Plan setup is applied to all phone numbers for that location.

As an administrator, you can move existing phone numbers from your current PSTN to the Cisco Calling Plan option. The following are the types of porting services:

Isolated - Choose this option if you’re porting only one number.
Full portability - Choose this option if you’re migrating a main number along with all the associated numbers.
Partial portability - Choose this option if you’re migrating some of the associated numbers to a billing telephone number, without porting the actual billing telephone number.
Complex portability - Choose this option if you’re migrating a main phone number without the associated numbers to that number. In this case, you must inform which number becomes the new billing telephone number.

You can port during morning trigger (10 a.m. to 1 p.m.) and afternoon trigger (2 p.m. to 5 p.m.).

Requests for porting out of hours are on a case-by-case basis and depend on the carriers involved. We can’t guarantee that out of hours porting is available.

1	From the customer view in https://admin.webex.com, go to Calling and click Numbers > Add Numbers.
2	Choose a location and click Select under Port numbers over. Click Next.
3	Add the phone numbers that you want to port, and then click Save & continue.
4	Enter the Date and Time by when you want the porting to finish. The schedule is set based on your preference. But it’s not guaranteed that the porting of your numbers is finished at the exact date and time selected.
5	(Optional) Enter an additional email address, other than the default contact listed, to receive notifications regarding the port order status.
6	Click Next.
7	Enter your current carrier account information in the fields provided. Make sure this matches the information on your previous carrier’s bill.
8	Click Next.
9	Upload your previous carrier bill (not older than 30 days).
10	Click Next.
11	Upload the LOA. The authorized contact for your previous carrier’s account needs to upload the signed LOA. Open a ticket with Webex Partner Help Center to get the LOA required for your country and upload the signed copy here. If you're not the authorized contact, skip this step for now. That person can come back and upload the signed LOA later, we’ll send your order contacts a reminder.
12	Click Save & continue.
13	Your Port Order is submitted. You can check the order status in PSTN Orders.
14	Click Done. Additional documents may be required to complete your port request. Should those documents be required, our support team lets you know what is needed. Those can be added in the right-hand panel of the order. The Firm Order Commitment (FOC) date could be eight business days or later from the submission date. An FOC is the date on which the losing carrier states that it releases a phone number to the winning carrier. Once the losing carrier provides go ahead for porting, you can cancel or postpone the porting request as per the following rules: You can cancel or reschedule a standard porting operation to five working days before the porting date. You can cancel or reschedule a mixed operator porting operation to seven working days before the porting date. If porting takes place and you need to roll back the numbers to the previous carrier, raise such requests with the PTS team at the earliest. Rollbacks aren’t always possible and may require placing a port back request with the previous carrier.

Manage PSTN

When placing orders for new numbers or porting existing numbers, you can check the order status or port rejection notices in Control Hub.

A migration banner is displayed when there are locations which need to be migrated from Non-Integrated CCP to Integrated CCP.

From the customer view in https://admin.webex.com, go to Calling and click PSTN.

Every order submitted has a status value.
Select an order to check its status.

Status Values for New Number Orders

Displayed Status	Description

Pending	A New numbers order has been created by the user.
Provisioned	New numbers are provisioned.
Error	An issue is detected with the new numbers order. Create a TAC ticket to get help.
Action Required	Click to contact PTS for assistance.

Status Values for Ported Number Orders

Displayed Status	Description

Pending	User is in the process of creating/filling in details of the Porting Order. Once submitted, the order will still show Pending until Cisco validates and accepts the porting order.
Rejected	Porting issue is detected. See the Porting Errors table for additional details. If required, go to Control Hub and click on the PSTN Help link for PSTN technical support.
Submitted	Porting Order is validated and accepted.
FOC Received	FOC date confirmation from the previous PSTN provider received.
Completed	Porting process is complete.
Canceled	Order is canceled.

Porting Error Messages

Displayed Error	Description	How to fix

Account number mismatch	Account number doesn’t match the number on the Customer Service Record (CSR)	Update the Account Number field on the PSTN Order and resubmit. For some carriers, the account number may be the same as the BTN or the telephone number itself.
Account number required	The account number wasn't provided but is required.	Update the Account Number field on the PSTN Order and resubmit. For some carriers, the account number may be the same as the BTN or the telephone number itself.
Account name mismatch	The person authorizing doesn't match the name on the (CSR).	Update the Authorized name on account field on the PSTN order and resubmit.
BTN mismatch	BTN or ATN doesn’t match that on the CSR.	Update the Carrier billing phone number field on the PSTN Order and resubmit.
Company name mismatch	Entity name does not match that on the CSR.	Update the Company name with previous carrier field on the PSTN order and resubmit.
Multiple BTNs	The OSP requires this Porting Order to be split and submitted as separate orders.	Cancel the current PSTN order and create a new, multiple PSTN Orders. Create one for each group of numbers that have the same BTN.
FOC rejected by losing carrier	The FOC date requested can’t be accommodated by the OSP.	Update the Port Complete date field on the PSTN order and resubmit.
Unknown	Go to Control Hub and click on the PSTN Help link for PSTN technical support.	Go to Control Hub and click on the PSTN Help link for PSTN technical support.
Invalid PIN	Passcode/PIN must be provided for wireless port.	Update the PIN field on the PSTN order and resubmit.
Pending order	The OSP has a pending LSR on the account (for example, a port out or address change).	Remove the telephone numbers in question from the PSTN order and resubmit.
Pending main BTN	BTN is one of the phone numbers being ported. User must indicate Porting Order Type, Remaining Numbers Action, and New Billing Phone Number accordingly.	Remove the main BTN from the list of telephone numbers being ported and resubmit the order. Include the Main BTN into the last iteration of numbers (if porting numbers in multiple iterations).
Service address mismatch	The location info doesn't match that on the CSR.	Update the Service address, State, and City fields and resubmit the order.
TN has special feature	Some of the phone numbers can't be ported because they have a special feature (for example, remote call forward).	Remove numbers with special features from the PSTN order and resubmit. Or, unassign a special features from the numbers being ported.
TN mismatch	Some of the phone numbers don't belong to the end user.	Remove one or more numbers in question and resubmit the order.
TN not portable	Some of the phone numbers can't be ported because they're inactive or aren't part of the end user's account.	Try to remove one or more numbers in question and resubmit the PSTN order.
Unsupported rate center	The rate center isn't portable.	Remove one or more numbers in question and resubmit the order.
Zip/postal code mismatch	Postal code doesn't match the one on the CSR.	Update the Zip code field and resubmit the order.
Previous carrier's bill is invalid	The invoice is invalid.	Go to PSTN Order details, then open Previous Carrier’s Bill section. Upload the correct bill file and resubmit the order.
LOA invalid	The LOA is invalid.	Sign the LOA and resubmit the PSTN order. Alternatively, go to Control Hub and click on the PSTN Help link for PSTN technical support.

PSTN – Public Switched Telephone Network

CSR – Customer Service Record

FOC – Firm Order Commitment

OSP – Old Service Provider

BTN – Billing Telephone Number

ATN – Account Telephone Number

Change the emergency service address for a user

1	From the customer view in https://admin.webex.com, go to Users.
2	Select the user you want to modify and click Calling.
3	Select the primary phone number under Directory Numbers.
4	Under Emergency Service Address, select Custom Address.
5	Update the information for the user and click Save.

Change the emergency service address for a location

Once a location is set up with the Cisco Calling Plan, you can update the Emergency Service Address.

1	From the customer view in https://admin.webex.com, go to Management > Locations and select the location you want to update.
2	Next to PSTN Connection, click Manage.
3	Next to the Emergency Service Address, click Edit.
4	Enter the new addres and click Save.

Supported paths for PSTN migration

Use this matrix to know the potential PSTN migration paths for Webex Calling.

Webex Calling supports the following PSTN migration paths:

Using Self Service through Control Hub
- Premises-based PSTN, non-integrated CCPP, and non-integrated IntelePeer to Cisco Calling Plans. See Migrate to Cisco Calling plans.
- Non-integrated CCP to Integrated CCP. See, Migrating from Non-Integrated CCP to Integrated CCP (webex.com)
- Non-integrated CCP Provider including non-integrated Intelepeer to a Premises-based Solution. See, Configure premises-based PSTN in Control Hub
Using Manual Migration
- Premises-based solution to Integrated CCP Provider
- Integrated CCP Provider to Non-integrated CCP Provider (Exception: Non-integrated Intelepeer isn’t supported as the target CCP Provider)
- Integrated CCP Provider to Premises-based Solution

Here’s a list of unsupported PSTN migration paths:

Cisco Calling Plans to integrated Intelepeer
Integrated Intelepeer to Cisco Calling Plans

Your Cisco Calling Plan bill

When your billing begins:

Outbound Calling Plans ordered in CCW begin billing on the requested service date (RSD).
Outbound Calling Plans provisioned in Control Hub begin billing immediately.
Phone numbers provisioned in Control Hub begin billing immediately or, if ported from another provider, will begin billing upon port completion.

Outbound calling plan rates:

Rates for the Outbound Calling Plans and phone numbers are pro-rated using the same proration methord used to calculate the rates for the Webex Calling licenses.
International calling rates vary by country and are billed the month following usage.

Find support for Cisco Calling Plans

Cisco Calling Plans support is provided by various support divisions, depending on your need.

Table 9. Cisco Support Contact Information
Support Division	Purpose	Contact Information
Partner Help Desk (PHD)	Partner how-to and/or documentation inquiries, Pre-quoting Regulatory Tax and other enquiries about the Cisco Calling Plans offering.	North America: 1-844-613-6108 EMEA: +44 129 366 10 20 APAC: +61 3 7017 7272 Email: webexcalling-phd@cisco.com
PSTN Technical Support (PTS)	Partner/Customer PSTN-related questions Port order expedite requests Port date reschedules Port rejections Specific date/time requests for a port Port date changes post FOC (Firm Order Commitment) Order cancellations	Go to Control Hub and click on PSTN Help link for PSTN technical support.
TAC	Issues with Control Hub functionality Issues with service, such as dropped calls, call quality issues, or service outages	North America: 1-800-553-2447 EMEA: +32 2 704 5555 APAC: +61 2 8446 7411 Email: tac@cisco.com See also: Help with TAC Open a support case
Invoice & Collections	VAT, Payment and other invoicing queries	Contact the Collector on the Invoice via email or phone
Cisco SaaS Support Team (CES)	Quoting Order Booking & Management Provisioning Subscription Management Billing & Invoicing Disputes	Refer Partner Support Playbook and Cisco Calling Plans FAQ Create a case through link below if the required information is not found in the playbook - https://customerservice.cloudapps.cisco.com/

Cisco Calling Plans requirements and limitations

Requirements

Partners must be an authorized Webex Calling partner and have accepted the new Webex Calling addendum through enrollment into the Webex Calling PSTN program.
A minimum of one committed Outbound Calling Plan license must be purchased to enable access to all services associated with Cisco Calling Plans.

Limitations

Cisco Calling Plans are currently available to specified countries.
Existing Webex Calling locations or telephone numbers can only transition to Cisco Calling Plans in certain scenarios. For details on supported migration paths, refer Supported paths for PSTN migration section.
You can order a maximum of 100 new standard phone numbers at a time. Additional numbers can be placed as a separate order.
Toll-free numbers aren’t currently available. You can’t order new toll-free numbers or port existing toll-free numbers to the Cisco Calling Plans.
Cisco Calling Plans aren’t supported with Webex Contact Center or authorized for use in which high-concurrent calls or high-volume calls or uncommonly short or long calls are made. For more information about Webex Contact Center, see Get started with Webex Contact Center.
Some premium services and international destinations may not be available for operational purposes. If specific destinations which are not generally available are required, customers can open a support case to request availability.

Select your PSTN provider

The card view displays the PSTN provider available for the Webex Calling customer before configuring the PSTN location. The PSTN view displays both Providers and Orders.

The provider screen displays the various provider cards with the list of supported service types. The Providers section is classified into the following:

Preferred Calling providers
Certified Calling providers
Calling providers

The providers include the following:

Provider summary
List of locations configured with this provider
List of markets that the provider is available for the supported services.

If the customer has PSTN locations where Calling services aren’t set up, the Select this provider action bar displays. Use this option to configure the service for the PSTN location.

Select the location from the drop-down menu.
Choose the subscription type for the users to use the Cisco Calling plans. Click Next.
Complete the fields for Contract Information and Emergency Service Address configuration.

The PSTN service set up is now complete.

Cisco Calling Plans trials

Each trial account can provision up to 10 standard telephone numbers from Cisco Calling Plans with Webex Calling. It isn’t permitted to provision more than 10 numbers per trial.
Only new, standard telephone numbers are supported in trials. Ported numbers, consecutive blocks, and inbound toll-free numbers aren’t supported on trial accounts. You also cannot port numbers out of a trial. You must convert to a paid account if you wish to use these features.
International calling, along with Premium Service Call types I & II are blocked from use during the trial period.
Business Texting isn’t available on Webex Calling trial accounts.
Trial accounts are intended for technical evaluation purposes only, and not for normal commercial operation. As such, emergency services are only meant for technical evaluation; actual emergency calls can’t be guaranteed. Users shouldn’t place actual emergency service calls on a trial account.

Set up your Cisco Calling Plan

Once your Cisco Calling Plan service is enabled, you can select one of the PSTN options:

Cisco Calling Plans (Cisco PSTN)
Cloud Connected PSTN
Premise-based PSTN (Local Gateway must be enabled separately. For more information, see Configure Premises-based PSTN in Control Hub.)

1	From the customer view in https://admin.webex.com, go to Management > Locations and select the location you want to update.
2	Select the Calling tab and Click Manage next to PTSN Connection.
3	Select Cisco Calling Plans and click Next.
4	Enter the contact information and click Next. This field is for the contact information of the person who will sign the legal contract with Cisco.
5	Enter the Emergency Services Address (ESA), and click Save. By default, the ESA entered here is applied to all phone numbers for this location. You can change the ESA for an individual user if needed. For example, you may need to change the ESA if you have a remote employee who works from home.
6	On the summary screen, do one of the following: Add numbers. Click Done. You can add numbers to your calling plan later.

Order new phone numbers

Before you begin

The Cisco Calling Plan must be enabled for your site before you can order new phone numbers through Control Hub.
By default, the Emergency Service Address (ESA) entered for a location during your Cisco Calling Plan setup is applied to all phone numbers for that location.
Provide the following information for business identity verification:
- First name and last name
- Contact phone number
- Company name
- German company incorporation certificate copy
- Germany registration form, which is available in the Pega Documents tab in the Control Hub.
Provide the following information for address verification:
- Address matching the DID area code (street, building number, postal code, city, and country)
- A copy of a utility bill, which is less than three months old.

1	From the customer view in https://admin.webex.com, go to Calling and then click Numbers > Add Numbers.
2	Choose a location and click Select under Order New Numbers. Click Next. You’re directed to Contact Support to order a new number.
3	Click Contact Support. Your location information is automatically populated on the Case Details Screen.
4	Indicate how many new numbers you’re requesting in the Number of Telephone Numbers Requested field.
5	Select your Number Type (Local or National) from the drop-down menu.
6	(Optional) Input additional details.
7	Click Submit. You receive a PSTN Order Number which displays on the PSTN order page. It can take up to 5 - 7 business days for the ordering and document approval process.

Port phone numbers

Before you begin

We strongly recommend you to read and familiarize yourself with the Cisco Calling Plan Number Porting Guidelines and Policies before you start porting the numbers.

Enable Cisco Calling Plan for your location before you port phone numbers through the Control Hub.
A signed Letter of Agency (LOA) is needed, authorizing Cisco to place orders with the current PSTN carrier to move the service to Cisco. The LOA must be signed by the current account owner or authorized signer. You're prompted to sign the LOA while completing the porting steps.
Provide proof of a local address, which must be less than three months old. For local phone numbers, the address must be within the same area in which you need to port the phone number.
Provide a company registration document.
Make sure you have a recent bill in PNG or PDF format from your current PSTN provider. The bill must not be older than 30 days. While completing the porting steps, you’re prompted to upload a copy of your bill.
For successful porting, ensure that you have the following information ready:
- List of all phone numbers to port (non-toll free)
- Current PSTN provider account information
- Customer Service Record (CSR) if available
- Your account PIN if one exists
When planning for which numbers to port, we recommend that you consider any number that receives inbound calls. See Cisco Calling Plan Number Policy for more information.
By default, the Emergency Service Address (ESA) entered for a location during your Cisco Calling Plan setup is applied to all phone numbers for that location.

As an administrator, you can move existing phone numbers from your current PSTN to the Cisco Calling Plan option. The following are the types of porting services:

Standard port: When a phone number moves from one service provider to another, without any special circumstances. For example, porting a number from Carrier A to Carrier B within the same country and service area is a Standard port.
Mixed operator port: A more complex porting situation that involves multiple operators or service providers. For example, porting a range of numbers in a block that belongs to two or more network operators is a Mixed operator port.

Porting in Germany takes place on Monday to Friday between 6 a.m. to 8 a.m.

Requests for porting out of hours are on a case-by-case basis and depend on the carriers involved. We can’t guarantee that out of hours porting is available.

1	From the customer view in https://admin.webex.com, go to Calling and click Numbers > Add Numbers.
2	Choose a location and click Select under Port numbers over. Click Next.
3	Add the phone numbers that you want to port, and then click Save & continue.
4	Enter the Date and Time by when you want the porting to finish. The schedule is set based on your preference. But it’s not guaranteed that the porting of your numbers is finished at the exact date and time selected.
5	(Optional) Enter an additional email address, other than the default contact listed, to receive notifications regarding the port order status.
6	Click Next.
7	Enter your current carrier account information in the fields provided. Make sure this matches the information on your previous carrier’s bill.
8	Click Next.
9	Upload your previous carrier bill (not older than 30 days).
10	Click Next.
11	Upload the LOA. The authorized contact for your previous carrier’s account needs to upload the signed LOA. Open a ticket with Webex Partner Help Center to get the LOA required for your country and upload the signed copy here. If you're not the authorized contact, skip this step for now. That person can come back and upload the signed LOA later, we’ll send your order contacts a reminder.
12	Click Save & continue.
13	Your Port Order is submitted. You can check the order status in PSTN Orders.
14	Click Done. Additional documents may be required to complete your port request. Should those documents be required, our support team lets you know what is needed. Those can be added in the right-hand panel of the order. The Firm Order Commitment (FOC) date could be eight business days or later from the submission date. An FOC is the date on which the losing carrier states that it releases a phone number to the winning carrier. Once the losing carrier provides go ahead for porting, you can cancel or postpone the porting request as per the following rules: You can cancel or reschedule a standard porting operation to five working days before the porting date. You can cancel or reschedule a mixed operator porting operation to seven working days before the porting date. If porting takes place and you need to roll back the numbers to the previous carrier, raise such requests with the PTS team at the earliest. Rollbacks aren’t always possible and may require placing a port back request with the previous carrier.

Manage PSTN

When placing orders for new numbers or porting existing numbers, you can check the order status or port rejection notices in Control Hub.

A migration banner is displayed when there are locations which need to be migrated from Non-Integrated CCP to Integrated CCP.

From the customer view in https://admin.webex.com, go to Calling and click PSTN.

Every order submitted has a status value.
Select an order to check its status.

Status Values for New Number Orders

Displayed Status	Description

Pending	A New numbers order has been created by the user.
Provisioned	New numbers are provisioned.
Error	An issue is detected with the new numbers order. Create a TAC ticket to get help.
Action Required	Click to contact PTS for assistance.

Status Values for Ported Number Orders

Displayed Status	Description

Pending	User is in the process of creating/filling in details of the Porting Order. Once submitted, the order will still show Pending until Cisco validates and accepts the porting order.
Rejected	Porting issue is detected. See the Porting Errors table for additional details. If required, go to Control Hub and click on the PSTN Help link for PSTN technical support.
Submitted	Porting Order is validated and accepted.
FOC Received	FOC date confirmation from the previous PSTN provider received.
Completed	Porting process is complete.
Canceled	Order is canceled.

Porting Error Messages

Displayed Error	Description	How to fix

Account number mismatch	Account number doesn’t match the number on the Customer Service Record (CSR)	Update the Account Number field on the PSTN Order and resubmit. For some carriers, the account number may be the same as the BTN or the telephone number itself.
Account number required	The account number wasn't provided but is required.	Update the Account Number field on the PSTN Order and resubmit. For some carriers, the account number may be the same as the BTN or the telephone number itself.
Account name mismatch	The person authorizing doesn't match the name on the (CSR).	Update the Authorized name on account field on the PSTN order and resubmit.
BTN mismatch	BTN or ATN doesn’t match that on the CSR.	Update the Carrier billing phone number field on the PSTN Order and resubmit.
Company name mismatch	Entity name does not match that on the CSR.	Update the Company name with previous carrier field on the PSTN order and resubmit.
Multiple BTNs	The OSP requires this Porting Order to be split and submitted as separate orders.	Cancel the current PSTN order and create a new, multiple PSTN Orders. Create one for each group of numbers that have the same BTN.
FOC rejected by losing carrier	The FOC date requested can’t be accommodated by the OSP.	Update the Port Complete date field on the PSTN order and resubmit.
Unknown	Go to Control Hub and click on the PSTN Help link for PSTN technical support.	Go to Control Hub and click on the PSTN Help link for PSTN technical support.
Invalid PIN	Passcode/PIN must be provided for wireless port.	Update the PIN field on the PSTN order and resubmit.
Pending order	The OSP has a pending LSR on the account (for example, a port out or address change).	Remove the telephone numbers in question from the PSTN order and resubmit.
Pending main BTN	BTN is one of the phone numbers being ported. User must indicate Porting Order Type, Remaining Numbers Action, and New Billing Phone Number accordingly.	Remove the main BTN from the list of telephone numbers being ported and resubmit the order. Include the Main BTN into the last iteration of numbers (if porting numbers in multiple iterations).
Service address mismatch	The location info doesn't match that on the CSR.	Update the Service address, State, and City fields and resubmit the order.
TN has special feature	Some of the phone numbers can't be ported because they have a special feature (for example, remote call forward).	Remove numbers with special features from the PSTN order and resubmit. Or, unassign a special features from the numbers being ported.
TN mismatch	Some of the phone numbers don't belong to the end user.	Remove one or more numbers in question and resubmit the order.
TN not portable	Some of the phone numbers can't be ported because they're inactive or aren't part of the end user's account.	Try to remove one or more numbers in question and resubmit the PSTN order.
Unsupported rate center	The rate center isn't portable.	Remove one or more numbers in question and resubmit the order.
Zip/postal code mismatch	Postal code doesn't match the one on the CSR.	Update the Zip code field and resubmit the order.
Previous carrier's bill is invalid	The invoice is invalid.	Go to PSTN Order details, then open Previous Carrier’s Bill section. Upload the correct bill file and resubmit the order.
LOA invalid	The LOA is invalid.	Sign the LOA and resubmit the PSTN order. Alternatively, go to Control Hub and click on the PSTN Help link for PSTN technical support.

PSTN – Public Switched Telephone Network

CSR – Customer Service Record

FOC – Firm Order Commitment

OSP – Old Service Provider

BTN – Billing Telephone Number

ATN – Account Telephone Number

Change the emergency service address for a user

1	From the customer view in https://admin.webex.com, go to Users.
2	Select the user you want to modify and click Calling.
3	Select the primary phone number under Directory Numbers.
4	Under Emergency Service Address, select Custom Address.
5	Update the information for the user and click Save.

Change the emergency service address for a location

Once a location is set up with the Cisco Calling Plan, you can update the Emergency Service Address.

1	From the customer view in https://admin.webex.com, go to Management > Locations and select the location you want to update.
2	Next to PSTN Connection, click Manage.
3	Next to the Emergency Service Address, click Edit.
4	Enter the new addres and click Save.

Supported paths for PSTN migration

Use this matrix to know the potential PSTN migration paths for Webex Calling.

Webex Calling supports the following PSTN migration paths:

Using Self Service through Control Hub
- Premises-based PSTN, non-integrated CCPP, and non-integrated IntelePeer to Cisco Calling Plans. See Migrate to Cisco Calling plans.
- Non-integrated CCP to Integrated CCP. See, Migrating from Non-Integrated CCP to Integrated CCP (webex.com)
- Non-integrated CCP Provider including non-integrated Intelepeer to a Premises-based Solution. See, Configure premises-based PSTN in Control Hub
Using Manual Migration
- Premises-based solution to Integrated CCP Provider
- Integrated CCP Provider to Non-integrated CCP Provider (Exception: Non-integrated Intelepeer isn’t supported as the target CCP Provider)
- Integrated CCP Provider to Premises-based Solution

Here’s a list of unsupported PSTN migration paths:

Cisco Calling Plans to integrated Intelepeer
Integrated Intelepeer to Cisco Calling Plans

Your Cisco Calling Plan bill

When your billing begins:

Outbound Calling Plans ordered in CCW begin billing on the requested service date (RSD).
Outbound Calling Plans provisioned in Control Hub begin billing immediately.
Phone numbers provisioned in Control Hub begin billing immediately or, if ported from another provider, will begin billing upon port completion.

Outbound calling plan rates:

Rates for the Outbound Calling Plans and phone numbers are pro-rated using the same proration methord used to calculate the rates for the Webex Calling licenses.
International calling rates vary by country and are billed the month following usage.

Find support for Cisco Calling Plans

Cisco Calling Plans support is provided by various support divisions, depending on your need.

Table 10. Cisco Support Contact Information
Support Division	Purpose	Contact Information
Partner Help Desk (PHD)	Partner how-to and/or documentation inquiries, Pre-quoting Regulatory Tax and other enquiries about the Cisco Calling Plans offering.	North America: 1-844-613-6108 EMEA: +44 129 366 10 20 APAC: +61 3 7017 7272 Email: webexcalling-phd@cisco.com
PSTN Technical Support (PTS)	Partner/Customer PSTN-related questions Port order expedite requests Port date reschedules Port rejections Specific date/time requests for a port Port date changes post FOC (Firm Order Commitment) Order cancellations	Go to Control Hub and click on PSTN Help link for PSTN technical support.
TAC	Issues with Control Hub functionality Issues with service, such as dropped calls, call quality issues, or service outages	North America: 1-800-553-2447 EMEA: +32 2 704 5555 APAC: +61 2 8446 7411 Email: tac@cisco.com See also: Help with TAC Open a support case
Invoice & Collections	VAT, Payment and other invoicing queries	Contact the Collector on the Invoice via email or phone
Cisco SaaS Support Team (CES)	Quoting Order Booking & Management Provisioning Subscription Management Billing & Invoicing Disputes	Refer Partner Support Playbook and Cisco Calling Plans FAQ Create a case through link below if the required information is not found in the playbook - https://customerservice.cloudapps.cisco.com/

Cisco Calling Plans requirements and limitations

Requirements

Partners must be an authorized Webex Calling partner and have accepted the new Webex Calling addendum through enrollment into the Webex Calling PSTN program.
A minimum of one committed Outbound Calling Plan license must be purchased to enable access to all services associated with Cisco Calling Plans.

Limitations

Cisco Calling Plans are currently available to specified countries.
Existing Webex Calling locations or telephone numbers can only transition to Cisco Calling Plans in certain scenarios. For details on supported migration paths, refer Supported paths for PSTN migration section.
You can order a maximum of 100 new standard phone numbers at a time. Additional numbers can be placed as a separate order.
Toll-free numbers aren’t currently available. You can’t order new toll-free numbers or port existing toll-free numbers to the Cisco Calling Plans.
Cisco Calling Plans aren’t supported with Webex Contact Center or authorized for use in which high-concurrent calls or high-volume calls or uncommonly short or long calls are made. For more information about Webex Contact Center, see Get started with Webex Contact Center.
Some premium services and international destinations may not be available for operational purposes. If specific destinations which are not generally available are required, customers can open a support case to request availability.

Select your PSTN provider

The card view displays the PSTN provider available for the Webex Calling customer before configuring the PSTN location. The PSTN view displays both Providers and Orders.

The provider screen displays the various provider cards with the list of supported service types. The Providers section is classified into the following:

Preferred Calling providers
Certified Calling providers
Calling providers

The providers include the following:

Provider summary
List of locations configured with this provider
List of markets that the provider is available for the supported services.

If the customer has PSTN locations where Calling services aren’t set up, the Select this provider action bar displays. Use this option to configure the service for the PSTN location.

Select the location from the drop-down menu.
Choose the subscription type for the users to use the Cisco Calling plans. Click Next.
Complete the fields for Contract Information and Emergency Service Address configuration.

The PSTN service set up is now complete.

Cisco Calling Plans trials

Each trial account can provision up to 10 standard telephone numbers from Cisco Calling Plans with Webex Calling. It isn’t permitted to provision more than 10 numbers per trial.
Only new, standard telephone numbers are supported in trials. Ported numbers, consecutive blocks, and inbound toll-free numbers aren’t supported on trial accounts. You also cannot port numbers out of a trial. You must convert to a paid account if you wish to use these features.
International calling, along with Premium Service Call types I & II are blocked from use during the trial period.
Business Texting isn’t available on Webex Calling trial accounts.
Trial accounts are intended for technical evaluation purposes only, and not for normal commercial operation. As such, emergency services are only meant for technical evaluation; actual emergency calls can’t be guaranteed. Users shouldn’t place actual emergency service calls on a trial account.

Set up your Cisco Calling Plan

Once your Cisco Calling Plan service is enabled, you can select one of the PSTN options:

Cisco Calling Plans (Cisco PSTN)
Cloud Connected PSTN
Premise-based PSTN (Local Gateway must be enabled separately. For more information, see Configure Premises-based PSTN in Control Hub.)

1	From the customer view in https://admin.webex.com, go to Management > Locations and select the location you want to update.
2	Select the Calling tab and Click Manage next to PTSN Connection.
3	Select Cisco Calling Plans and click Next.
4	Enter the contact information and click Next. This field is for the contact information of the person who will sign the legal contract with Cisco.
5	Enter the Emergency Services Address (ESA), and click Save. By default, the ESA entered here is applied to all phone numbers for this location. You can change the ESA for an individual user if needed. For example, you may need to change the ESA if you have a remote employee who works from home.
6	On the summary screen, do one of the following: Add numbers. Click Done. You can add numbers to your calling plan later.

Order new phone numbers

Before you begin

Enable the Cisco Calling Plan for your site before you order new phone numbers through Control Hub.
By default, the Emergency Service Address (ESA) entered for a location during your Cisco Calling Plan setup is applied to all phone numbers for that location.
Provide the following information for business identity verification:
- First name and last name of the legal representative
- Contact phone number
- Company name
- Local company registration certificate
Provide the following information for address verification:
- Address matching the DID area code (street, building number, postal code, city, and country)
- Proof of address, not older than last three months

Additionally, you must submit a copy of your passport or ID card in the Netherlands, Switzerland, Poland, Greece, and Lithuania. You must provide VAT ID in Sweden and Greece.

1	From the customer view in https://admin.webex.com, go to Calling and then click Numbers > Add Numbers.
2	Choose a location and click Select under Order new numbers. Click Next. You’re directed to Contact Support to order a new numbers.
3	Click Contact Support. Your location information is automatically populated on the Case Details window.
4	Indicate how many new numbers you’re requesting in the Number of Telephone Numbers Requested field.
5	From the Number Type drop-down list, choose Local or National as the case maybe.
6	(Optional) Enter the additional details.
7	Click Submit. You receive a PSTN Order Number which displays on the PSTN order page. It can take up to five to seven business days for the ordering and document approval process.

Port phone numbers

Before you begin

We strongly recommend you to read and familiarize yourself with the Cisco Calling Plan Number Porting Guidelines and Policies before you start porting the numbers.

Enable Cisco Calling Plan for your location before you port phone numbers through the Control Hub.
A signed Letter of Agency (LOA) is needed, authorizing Cisco to place orders with the current PSTN carrier to move the service to Cisco. The LOA must be signed by the current account owner or authorized signer. You're prompted to sign the LOA while completing the porting steps.
Make sure you have a recent bill in PNG or PDF format from your current PSTN provider. The bill must not be older than 30 days. While completing the porting steps, you’re prompted to upload a copy of your bill.
For successful porting, ensure that you have the following information ready:
- List of all phone numbers to port (non-toll free)
- Current PSTN provider account information
- Customer Service Record (CSR) if available
- Your account PIN if one exists
- VAT number or Tax ID

Provide copy of your Passport or a valid ID proof.
Provide your company registration certification.
When planning for which numbers to port, we recommend that you consider any number that receives inbound calls. See Cisco Calling Plan Number Policy for more information.
By default, the Emergency Service Address (ESA) entered for a location during your Cisco Calling Plan setup is applied to all phone numbers for that location.

As an administrator, you can move existing phone numbers from your current PSTN to the Cisco Calling Plan option. The following are the types of porting services:

Standard port: When a phone number moves from one service provider to another, without any special circumstances. For example, porting a number from Carrier A to Carrier B within the same country and service area is a Standard port.
Mixed operator port: A more complex porting situation that involves multiple operators or service providers. For example, porting a range of numbers in a block that belongs to two or more network operators is a Mixed operator port.

Porting takes place on Monday to Friday between 9 a.m. to 6 p.m.

Requests for porting out of hours are on a case-by-case basis and depend on the carriers involved. We can’t guarantee that out of hours porting is available.

1	From the customer view in https://admin.webex.com, go to Calling and click Numbers > Add Numbers.
2	Choose a location and click Select under Port numbers over. Click Next.
3	Add the phone numbers that you want to port, and then click Save & continue.
4	Enter the Date and Time by when you want the porting to finish. The schedule is set based on your preference. But it’s not guaranteed that the porting of your numbers is finished at the exact date and time selected.
5	(Optional) Enter an additional email address, other than the default contact listed, to receive notifications regarding the port order status.
6	Click Next.
7	Enter your current carrier account information in the fields provided. Make sure this matches the information on your previous carrier’s bill.
8	Click Next.
9	Upload your previous carrier bill (not older than 30 days).
10	Click Next.
11	Upload the LOA. The authorized contact for your previous carrier’s account needs to upload the signed LOA. Open a ticket with Webex Partner Help Center to get the LOA required for your country and upload the signed copy here. If you're not the authorized contact, skip this step for now. That person can come back and upload the signed LOA later, we’ll send your order contacts a reminder.
12	Click Save & continue.
13	Your Port Order is submitted. You can check the order status in PSTN Orders.
14	Click Done. Our support team contacts you for any additional documents requirements to complete your porting request. You can upload such documents in the right-hand panel of the order. The Firm Order Commitment (FOC) date can be seven business days or more from the submission date. An FOC is the date on which the losing carrier states that it releases a phone number to the winning carrier. Once the losing carrier provides the go ahead for porting, you can cancel or postpone the porting request as per the following rules: These timeframes are estimates and aren’t bound by any SLA. You can cancel or reschedule a standard porting operation to five working days before the porting date. You can cancel or reschedule a mixed operator porting operation to seven working days before the porting date. If porting takes place and you need to roll back the numbers to the previous carrier, raise such requests with the PTS team at the earliest. Rollbacks aren’t always possible and may require placing a port back request with the previous carrier.

Manage PSTN

When placing orders for new numbers or porting existing numbers, you can check the order status or port rejection notices in Control Hub.

A migration banner is displayed when there are locations which need to be migrated from Non-Integrated CCP to Integrated CCP.

From the customer view in https://admin.webex.com, go to Calling and click PSTN.

Every order submitted has a status value.
Select an order to check its status.

Status Values for New Number Orders

Displayed Status	Description

Pending	A New numbers order has been created by the user.
Provisioned	New numbers are provisioned.
Error	An issue is detected with the new numbers order. Create a TAC ticket to get help.
Action Required	Click to contact PTS for assistance.

Status Values for Ported Number Orders

Displayed Status	Description

Pending	User is in the process of creating/filling in details of the Porting Order. Once submitted, the order will still show Pending until Cisco validates and accepts the porting order.
Rejected	Porting issue is detected. See the Porting Errors table for additional details. If required, go to Control Hub and click on the PSTN Help link for PSTN technical support.
Submitted	Porting Order is validated and accepted.
FOC Received	FOC date confirmation from the previous PSTN provider received.
Completed	Porting process is complete.
Canceled	Order is canceled.

Porting Error Messages

Displayed Error	Description	How to fix

Account number mismatch	Account number doesn’t match the number on the Customer Service Record (CSR)	Update the Account Number field on the PSTN Order and resubmit. For some carriers, the account number may be the same as the BTN or the telephone number itself.
Account number required	The account number wasn't provided but is required.	Update the Account Number field on the PSTN Order and resubmit. For some carriers, the account number may be the same as the BTN or the telephone number itself.
Account name mismatch	The person authorizing doesn't match the name on the (CSR).	Update the Authorized name on account field on the PSTN order and resubmit.
BTN mismatch	BTN or ATN doesn’t match that on the CSR.	Update the Carrier billing phone number field on the PSTN Order and resubmit.
Company name mismatch	Entity name does not match that on the CSR.	Update the Company name with previous carrier field on the PSTN order and resubmit.
Multiple BTNs	The OSP requires this Porting Order to be split and submitted as separate orders.	Cancel the current PSTN order and create a new, multiple PSTN Orders. Create one for each group of numbers that have the same BTN.
FOC rejected by losing carrier	The FOC date requested can’t be accommodated by the OSP.	Update the Port Complete date field on the PSTN order and resubmit.
Unknown	Go to Control Hub and click on the PSTN Help link for PSTN technical support.	Go to Control Hub and click on the PSTN Help link for PSTN technical support.
Invalid PIN	Passcode/PIN must be provided for wireless port.	Update the PIN field on the PSTN order and resubmit.
Pending order	The OSP has a pending LSR on the account (for example, a port out or address change).	Remove the telephone numbers in question from the PSTN order and resubmit.
Pending main BTN	BTN is one of the phone numbers being ported. User must indicate Porting Order Type, Remaining Numbers Action, and New Billing Phone Number accordingly.	Remove the main BTN from the list of telephone numbers being ported and resubmit the order. Include the Main BTN into the last iteration of numbers (if porting numbers in multiple iterations).
Service address mismatch	The location info doesn't match that on the CSR.	Update the Service address, State, and City fields and resubmit the order.
TN has special feature	Some of the phone numbers can't be ported because they have a special feature (for example, remote call forward).	Remove numbers with special features from the PSTN order and resubmit. Or, unassign a special features from the numbers being ported.
TN mismatch	Some of the phone numbers don't belong to the end user.	Remove one or more numbers in question and resubmit the order.
TN not portable	Some of the phone numbers can't be ported because they're inactive or aren't part of the end user's account.	Try to remove one or more numbers in question and resubmit the PSTN order.
Unsupported rate center	The rate center isn't portable.	Remove one or more numbers in question and resubmit the order.
Zip/postal code mismatch	Postal code doesn't match the one on the CSR.	Update the Zip code field and resubmit the order.
Previous carrier's bill is invalid	The invoice is invalid.	Go to PSTN Order details, then open Previous Carrier’s Bill section. Upload the correct bill file and resubmit the order.
LOA invalid	The LOA is invalid.	Sign the LOA and resubmit the PSTN order. Alternatively, go to Control Hub and click on the PSTN Help link for PSTN technical support.

PSTN – Public Switched Telephone Network

CSR – Customer Service Record

FOC – Firm Order Commitment

OSP – Old Service Provider

BTN – Billing Telephone Number

ATN – Account Telephone Number

Change the emergency service address for a user

1	From the customer view in https://admin.webex.com, go to Users.
2	Select the user you want to modify and click Calling.
3	Select the primary phone number under Directory Numbers.
4	Under Emergency Service Address, select Custom Address.
5	Update the information for the user and click Save.

Change the emergency service address for a location

Once a location is set up with the Cisco Calling Plan, you can update the Emergency Service Address.

1	From the customer view in https://admin.webex.com, go to Management > Locations and select the location you want to update.
2	Next to PSTN Connection, click Manage.
3	Next to the Emergency Service Address, click Edit.
4	Enter the new addres and click Save.

Port phone numbers

As an administrator, you can move existing phone numbers from your current PSTN to the Cisco Calling Plan.

Enable Cisco Calling Plan for your location before you port phone numbers through the Control Hub.
Submit a signed Letter of Agency (LOA), to authorize Cisco to place orders with the current PSTN carrier to move the service to Cisco. The current owner or an authorized signer must sign the LOA. You're prompted to sign the LOA while completing the porting steps.

Ensure that the LOA address is within the same area code as the porting phone numbers.
To ensure a successful port, make sure you have the following information ready:
- List of all phone numbers to port (non toll free)
- Current PSTN provider account information
- Local TAX/VAT Number or Company Registration Number
- Migration Code
- Latest Invoice
- Valid Passport/ID Card of the authorizing person
- Fiscal Code of the authorizing person
- Proof of Local Address (Utility Bill, and so on), dated from within the last three months
Porting Window– Ports in Italy can take place from Monday to Friday from 8 a.m. to 6 p.m..

Out of hours ports are requested on a case-by-case basis and depending on the carriers. Cisco can’t guarantee the availability of the out of hours porting.
Port Types
- Standard Ports: A porting process where a number is moved from one provider to another without any special circumstances or complexities.
  
  For example, porting a number from Carrier A to Carrier B within the same country and service area is a standard port.
- Mixed Operator Ports: A more complex porting situation that involves multiple operators or service providers.
  
  For instance, porting a range of numbers in a block that belong to two or more different range holders or Current Network Operators.
When planning for which numbers to port, we recommend that you consider any number that receives inbound calls. See Cisco Calling Plan Number Policy for more information.
By default, the Emergency Service Address (ESA) entered for a location during your Cisco Calling Plan setup is applied to all phone numbers for that location.

Port Cancellations and Rollbacks

If you choose to cancel or postpone a porting request even after receiving a go-ahead from your current carrier, bear in mind the following rules:

You can cancel or reschedule standard ports up to five working days before the port date.
You can cancel or reschedule Mixed Operator/Complex ports up to seven working days before the port date.

Once the port period ends, the number porting starts without the option to cancel or reschedule.
If a porting doesn’t happen then to roll back the numbers to the previous carrier, raise a case with the Cisco PTS team. Rollbacks aren’t always possible and may require to place the port back with the previous carrier.

Ordering new numbers

A local telephony provider processes the new number request. Here is a list of legally required documents by the PSTN provider to provision the services:

For business identity verification:

Name of the authorizing person
Fiscal Code of the authorizing person
Date of Birth of the authorizing person
Place of Birth of the authorizing person
Gender of the authorizing person
Nationality of the authorizing person
Contact the phone number of the authorizing person
Contact Email of the authorizing person
Passport or ID copy of the authorizing person
Company name
VAT number
Company incorporation certificate copy
Service description

For address verification:

Address matching the DID area code (street, building number, postal code, city, and country
A copy of a utility bill which is less than three months old.

It takes at least 5–7 business days for ordering and document approval.

To port numbers using the Control Hub, complete these steps:

Supported paths for PSTN migration

Use this matrix to know the potential PSTN migration paths for Webex Calling.

Webex Calling supports the following PSTN migration paths:

Using Self Service through Control Hub
- Premises-based PSTN, non-integrated CCPP, and non-integrated IntelePeer to Cisco Calling Plans. See Migrate to Cisco Calling plans.
- Non-integrated CCP to Integrated CCP. See, Migrating from Non-Integrated CCP to Integrated CCP (webex.com)
- Non-integrated CCP Provider including non-integrated Intelepeer to a Premises-based Solution. See, Configure premises-based PSTN in Control Hub
Using Manual Migration
- Premises-based solution to Integrated CCP Provider
- Integrated CCP Provider to Non-integrated CCP Provider (Exception: Non-integrated Intelepeer isn’t supported as the target CCP Provider)
- Integrated CCP Provider to Premises-based Solution

Here’s a list of unsupported PSTN migration paths:

Cisco Calling Plans to integrated Intelepeer
Integrated Intelepeer to Cisco Calling Plans

Your Cisco Calling Plan bill

When your billing begins:

Outbound Calling Plans ordered in CCW begin billing on the requested service date (RSD).
Outbound Calling Plans provisioned in Control Hub begin billing immediately.
Phone numbers provisioned in Control Hub begin billing immediately or, if ported from another provider, will begin billing upon port completion.

Outbound calling plan rates:

Rates for the Outbound Calling Plans and phone numbers are pro-rated using the same proration methord used to calculate the rates for the Webex Calling licenses.
International calling rates vary by country and are billed the month following usage.

Find support for Cisco Calling Plans

Cisco Calling Plans support is provided by various support divisions, depending on your need.

Table 11. Cisco Support Contact Information
Support Division	Purpose	Contact Information
Partner Help Desk (PHD)	Partner how-to and/or documentation inquiries, Pre-quoting Regulatory Tax and other enquiries about the Cisco Calling Plans offering.	North America: 1-844-613-6108 EMEA: +44 129 366 10 20 APAC: +61 3 7017 7272 Email: webexcalling-phd@cisco.com
PSTN Technical Support (PTS)	Partner/Customer PSTN-related questions Port order expedite requests Port date reschedules Port rejections Specific date/time requests for a port Port date changes post FOC (Firm Order Commitment) Order cancellations	Go to Control Hub and click on PSTN Help link for PSTN technical support.
TAC	Issues with Control Hub functionality Issues with service, such as dropped calls, call quality issues, or service outages	North America: 1-800-553-2447 EMEA: +32 2 704 5555 APAC: +61 2 8446 7411 Email: tac@cisco.com See also: Help with TAC Open a support case
Invoice & Collections	VAT, Payment and other invoicing queries	Contact the Collector on the Invoice via email or phone
Cisco SaaS Support Team (CES)	Quoting Order Booking & Management Provisioning Subscription Management Billing & Invoicing Disputes	Refer Partner Support Playbook and Cisco Calling Plans FAQ Create a case through link below if the required information is not found in the playbook - https://customerservice.cloudapps.cisco.com/

Cisco Calling Plans requirements and limitations

Requirements

Partners must be an authorized Webex Calling partner and have accepted the new Webex Calling addendum through enrollment into the Webex Calling PSTN program.
A minimum of one committed Outbound Calling Plan license must be purchased to enable access to all services associated with Cisco Calling Plans.

Limitations

Cisco Calling Plans are currently available to specified countries.
Existing Webex Calling locations or telephone numbers can only transition to Cisco Calling Plans in certain scenarios. For details on supported migration paths, refer Supported paths for PSTN migration section.
You can order a maximum of 100 new standard phone numbers at a time. Additional numbers can be placed as a separate order.
Toll-free numbers aren’t currently available. You can’t order new toll-free numbers or port existing toll-free numbers to the Cisco Calling Plans.
Cisco Calling Plans aren’t supported with Webex Contact Center or authorized for use in which high-concurrent calls or high-volume calls or uncommonly short or long calls are made. For more information about Webex Contact Center, see Get started with Webex Contact Center.
Some premium services and international destinations may not be available for operational purposes. If specific destinations which are not generally available are required, customers can open a support case to request availability.

Select your PSTN provider

The card view displays the PSTN provider available for the Webex Calling customer before configuring the PSTN location. The PSTN view displays both Providers and Orders.

The provider screen displays the various provider cards with the list of supported service types. The Providers section is classified into the following:

Preferred Calling providers
Certified Calling providers
Calling providers

The providers include the following:

Provider summary
List of locations configured with this provider
List of markets that the provider is available for the supported services.

If the customer has PSTN locations where Calling services aren’t set up, the Select this provider action bar displays. Use this option to configure the service for the PSTN location.

Select the location from the drop-down menu.
Choose the subscription type for the users to use the Cisco Calling plans. Click Next.
Complete the fields for Contract Information and Emergency Service Address configuration.

The PSTN service set up is now complete.

Cisco Calling Plans trials

Each trial account can provision up to 10 standard telephone numbers from Cisco Calling Plans with Webex Calling. It isn’t permitted to provision more than 10 numbers per trial.
Only new, standard telephone numbers are supported in trials. Ported numbers, consecutive blocks, and inbound toll-free numbers aren’t supported on trial accounts. You also cannot port numbers out of a trial. You must convert to a paid account if you wish to use these features.
International calling, along with Premium Service Call types I & II are blocked from use during the trial period.
Business Texting isn’t available on Webex Calling trial accounts.
Trial accounts are intended for technical evaluation purposes only, and not for normal commercial operation. As such, emergency services are only meant for technical evaluation; actual emergency calls can’t be guaranteed. Users shouldn’t place actual emergency service calls on a trial account.

Set up your Cisco Calling Plan

Once your Cisco Calling Plan service is enabled, you can select one of the PSTN options:

Cisco Calling Plans (Cisco PSTN)
Cloud Connected PSTN
Premise-based PSTN (Local Gateway must be enabled separately. For more information, see Configure Premises-based PSTN in Control Hub.)

1	From the customer view in https://admin.webex.com, go to Management > Locations and select the location you want to update.
2	Select the Calling tab and Click Manage next to PTSN Connection.
3	Select Cisco Calling Plans and click Next.
4	Enter the contact information and click Next. This field is for the contact information of the person who will sign the legal contract with Cisco.
5	Enter the Emergency Services Address (ESA), and click Save. By default, the ESA entered here is applied to all phone numbers for this location. You can change the ESA for an individual user if needed. For example, you may need to change the ESA if you have a remote employee who works from home.
6	On the summary screen, do one of the following: Add numbers. Click Done. You can add numbers to your calling plan later.

Order new phone numbers

Before you begin

Enable the Cisco Calling Plan for your site before you order new phone numbers through Control Hub.
By default, the Emergency Service Address (ESA) entered for a location during your Cisco Calling Plan setup is applied to all phone numbers for that location.
Provide the following information for business identity verification:
- First name and last name of the legal representative
- Contact phone number
- Company name
- Local company registration certificate
Provide the following information for address verification:
- Address matching the DID area code (street, building number, postal code, city, and country)
- Proof of address, not older than last three months

Additionally, you must submit a copy of your passport or ID card in the Netherlands, Switzerland, Poland, Greece, and Lithuania. You must provide VAT ID in Sweden and Greece.

1	From the customer view in https://admin.webex.com, go to Calling and then click Numbers > Add Numbers.
2	Choose a location and click Select under Order new numbers. Click Next. You’re directed to Contact Support to order a new numbers.
3	Click Contact Support. Your location information is automatically populated on the Case Details window.
4	Indicate how many new numbers you’re requesting in the Number of Telephone Numbers Requested field.
5	From the Number Type drop-down list, choose Local or National as the case maybe.
6	(Optional) Enter the additional details.
7	Click Submit. You receive a PSTN Order Number which displays on the PSTN order page. It can take up to five to seven business days for the ordering and document approval process.

Port phone numbers

Before you begin

We strongly recommend you to read and familiarize yourself with the Cisco Calling Plan Number Porting Guidelines and Policies before you start porting the numbers.

Enable Cisco Calling Plan for your location before you port phone numbers through Control Hub.
A signed Letter of Agency (LOA) is needed, authorizing Cisco to place orders with the current PSTN carrier to move the service to Cisco. The LOA must be signed by the current account owner or authorized signer. You're prompted to sign the LOA while completing the porting steps.
Make sure you have a recent bill in PNG or PDF format from your current PSTN provider. The bill must not be older than 30 days. While completing the porting steps, you’re prompted to upload a copy of your bill.
For successful porting, ensure that you have the following information ready:
- List of all phone numbers to port (non-toll free)
- Current PSTN provider account information
- Customer Service Record (CSR) if available
- Your account PIN if one exists
- UAN ID
When planning for which numbers to port, we recommend that you consider any number that receives inbound calls. See Cisco Calling Plan Number Policy for more information.
By default, the Emergency Service Address (ESA) entered for a location during your Cisco Calling Plan setup is applied to all phone numbers for that location.

As an administrator, you can move existing phone numbers from your current PSTN to the Cisco Calling Plan option. The following are the types of porting services:

Standard port: When a phone number moves from one service provider to another, without any special circumstances. For example, porting a number from Carrier A to Carrier B within the same country and service area is a Standard port.
Mixed operator port: A more complex porting situation that involves multiple operators or service providers. For example, porting a range of numbers in a block that belongs to two or more network operators is a Mixed operator port.

Porting in Ireland can take place on Monday to Friday between 10 a.m. to 3:30 p.m.

Requests for porting out of hours are on a case-by-case basis and depend on the carriers involved. We can’t guarantee that out of hours porting is available.

1	From the customer view in https://admin.webex.com, go to Calling and click Numbers > Add Numbers.
2	Choose a location and click Select under Port numbers over. Click Next.
3	Add the phone numbers that you want to port, and then click Save & continue.
4	Enter the Date and Time by when you want the porting to finish. The schedule is set based on your preference. But it’s not guaranteed that the porting of your numbers is finished at the exact date and time selected.
5	(Optional) Enter an additional email address, other than the default contact listed, to receive notifications regarding the port order status.
6	Click Next.
7	Enter your current carrier account information in the fields provided. Make sure this matches the information on your previous carrier’s bill.
8	Click Next.
9	Upload your previous carrier bill (not older than 30 days).
10	Click Next.
11	Upload the LOA. The authorized contact for your previous carrier’s account needs to upload the signed LOA. Open a ticket with Webex Partner Help Center to get the LOA required for your country and upload the signed copy here. If you're not the authorized contact, skip this step for now. That person can come back and upload the signed LOA later, we’ll send your order contacts a reminder.
12	Click Save & continue.
13	Your Port Order is submitted. You can check the order status in PSTN Orders.
14	Click Done. Our support team contacts you for any additional documents requirements to complete your porting request. You can upload the requested documents in the right-hand panel of the order. The Firm Order Commitment (FOC) date can be two business days later from the submission date. An FOC is the date on which the losing carrier states that it releases a phone number to the winning carrier. After the losing carrier confirms the porting request, you can cancel or postpone the porting request as per the following rules: These timeframes are estimates and aren’t bound by any SLA. You can cancel or reschedule a standard porting operation to five working days before the porting date. You can cancel or reschedule a mixed operator porting operation to seven working days before the porting date. If porting takes place and you need to roll back the numbers to the previous carrier, raise such requests with the PTS team at the earliest. Rollbacks aren’t always possible and may require placing a port back request with the previous carrier.

Manage PSTN

When placing orders for new numbers or porting existing numbers, you can check the order status or port rejection notices in Control Hub.

A migration banner is displayed when there are locations which need to be migrated from Non-Integrated CCP to Integrated CCP.

From the customer view in https://admin.webex.com, go to Calling and click PSTN.

Every order submitted has a status value.
Select an order to check its status.

Status Values for New Number Orders

Displayed Status	Description

Pending	A New numbers order has been created by the user.
Provisioned	New numbers are provisioned.
Error	An issue is detected with the new numbers order. Create a TAC ticket to get help.
Action Required	Click to contact PTS for assistance.

Status Values for Ported Number Orders

Displayed Status	Description

Pending	User is in the process of creating/filling in details of the Porting Order. Once submitted, the order will still show Pending until Cisco validates and accepts the porting order.
Rejected	Porting issue is detected. See the Porting Errors table for additional details. If required, go to Control Hub and click on the PSTN Help link for PSTN technical support.
Submitted	Porting Order is validated and accepted.
FOC Received	FOC date confirmation from the previous PSTN provider received.
Completed	Porting process is complete.
Canceled	Order is canceled.

Porting Error Messages

Displayed Error	Description	How to fix

Account number mismatch	Account number doesn’t match the number on the Customer Service Record (CSR)	Update the Account Number field on the PSTN Order and resubmit. For some carriers, the account number may be the same as the BTN or the telephone number itself.
Account number required	The account number wasn't provided but is required.	Update the Account Number field on the PSTN Order and resubmit. For some carriers, the account number may be the same as the BTN or the telephone number itself.
Account name mismatch	The person authorizing doesn't match the name on the (CSR).	Update the Authorized name on account field on the PSTN order and resubmit.
BTN mismatch	BTN or ATN doesn’t match that on the CSR.	Update the Carrier billing phone number field on the PSTN Order and resubmit.
Company name mismatch	Entity name does not match that on the CSR.	Update the Company name with previous carrier field on the PSTN order and resubmit.
Multiple BTNs	The OSP requires this Porting Order to be split and submitted as separate orders.	Cancel the current PSTN order and create a new, multiple PSTN Orders. Create one for each group of numbers that have the same BTN.
FOC rejected by losing carrier	The FOC date requested can’t be accommodated by the OSP.	Update the Port Complete date field on the PSTN order and resubmit.
Unknown	Go to Control Hub and click on the PSTN Help link for PSTN technical support.	Go to Control Hub and click on the PSTN Help link for PSTN technical support.
Invalid PIN	Passcode/PIN must be provided for wireless port.	Update the PIN field on the PSTN order and resubmit.
Pending order	The OSP has a pending LSR on the account (for example, a port out or address change).	Remove the telephone numbers in question from the PSTN order and resubmit.
Pending main BTN	BTN is one of the phone numbers being ported. User must indicate Porting Order Type, Remaining Numbers Action, and New Billing Phone Number accordingly.	Remove the main BTN from the list of telephone numbers being ported and resubmit the order. Include the Main BTN into the last iteration of numbers (if porting numbers in multiple iterations).
Service address mismatch	The location info doesn't match that on the CSR.	Update the Service address, State, and City fields and resubmit the order.
TN has special feature	Some of the phone numbers can't be ported because they have a special feature (for example, remote call forward).	Remove numbers with special features from the PSTN order and resubmit. Or, unassign a special features from the numbers being ported.
TN mismatch	Some of the phone numbers don't belong to the end user.	Remove one or more numbers in question and resubmit the order.
TN not portable	Some of the phone numbers can't be ported because they're inactive or aren't part of the end user's account.	Try to remove one or more numbers in question and resubmit the PSTN order.
Unsupported rate center	The rate center isn't portable.	Remove one or more numbers in question and resubmit the order.
Zip/postal code mismatch	Postal code doesn't match the one on the CSR.	Update the Zip code field and resubmit the order.
Previous carrier's bill is invalid	The invoice is invalid.	Go to PSTN Order details, then open Previous Carrier’s Bill section. Upload the correct bill file and resubmit the order.
LOA invalid	The LOA is invalid.	Sign the LOA and resubmit the PSTN order. Alternatively, go to Control Hub and click on the PSTN Help link for PSTN technical support.

PSTN – Public Switched Telephone Network

CSR – Customer Service Record

FOC – Firm Order Commitment

OSP – Old Service Provider

BTN – Billing Telephone Number

ATN – Account Telephone Number

Change the emergency service address for a user

1	From the customer view in https://admin.webex.com, go to Users.
2	Select the user you want to modify and click Calling.
3	Select the primary phone number under Directory Numbers.
4	Under Emergency Service Address, select Custom Address.
5	Update the information for the user and click Save.

Change the emergency service address for a location

Once a location is set up with the Cisco Calling Plan, you can update the Emergency Service Address.

1	From the customer view in https://admin.webex.com, go to Management > Locations and select the location you want to update.
2	Next to PSTN Connection, click Manage.
3	Next to the Emergency Service Address, click Edit.
4	Enter the new addres and click Save.

Supported paths for PSTN migration

Use this matrix to know the potential PSTN migration paths for Webex Calling.

Webex Calling supports the following PSTN migration paths:

Using Self Service through Control Hub
- Premises-based PSTN, non-integrated CCPP, and non-integrated IntelePeer to Cisco Calling Plans. See Migrate to Cisco Calling plans.
- Non-integrated CCP to Integrated CCP. See, Migrating from Non-Integrated CCP to Integrated CCP (webex.com)
- Non-integrated CCP Provider including non-integrated Intelepeer to a Premises-based Solution. See, Configure premises-based PSTN in Control Hub
Using Manual Migration
- Premises-based solution to Integrated CCP Provider
- Integrated CCP Provider to Non-integrated CCP Provider (Exception: Non-integrated Intelepeer isn’t supported as the target CCP Provider)
- Integrated CCP Provider to Premises-based Solution

Here’s a list of unsupported PSTN migration paths:

Cisco Calling Plans to integrated Intelepeer
Integrated Intelepeer to Cisco Calling Plans

Your Cisco Calling Plan bill

When your billing begins:

Outbound Calling Plans ordered in CCW begin billing on the requested service date (RSD).
Outbound Calling Plans provisioned in Control Hub begin billing immediately.
Phone numbers provisioned in Control Hub begin billing immediately or, if ported from another provider, will begin billing upon port completion.

Outbound calling plan rates:

Rates for the Outbound Calling Plans and phone numbers are pro-rated using the same proration methord used to calculate the rates for the Webex Calling licenses.
International calling rates vary by country and are billed the month following usage.

Find support for Cisco Calling Plans

Cisco Calling Plans support is provided by various support divisions, depending on your need.

Table 12. Cisco Support Contact Information
Support Division	Purpose	Contact Information
Partner Help Desk (PHD)	Partner how-to and/or documentation inquiries, Pre-quoting Regulatory Tax and other enquiries about the Cisco Calling Plans offering.	North America: 1-844-613-6108 EMEA: +44 129 366 10 20 APAC: +61 3 7017 7272 Email: webexcalling-phd@cisco.com
PSTN Technical Support (PTS)	Partner/Customer PSTN-related questions Port order expedite requests Port date reschedules Port rejections Specific date/time requests for a port Port date changes post FOC (Firm Order Commitment) Order cancellations	Go to Control Hub and click on PSTN Help link for PSTN technical support.
TAC	Issues with Control Hub functionality Issues with service, such as dropped calls, call quality issues, or service outages	North America: 1-800-553-2447 EMEA: +32 2 704 5555 APAC: +61 2 8446 7411 Email: tac@cisco.com See also: Help with TAC Open a support case
Invoice & Collections	VAT, Payment and other invoicing queries	Contact the Collector on the Invoice via email or phone
Cisco SaaS Support Team (CES)	Quoting Order Booking & Management Provisioning Subscription Management Billing & Invoicing Disputes	Refer Partner Support Playbook and Cisco Calling Plans FAQ Create a case through link below if the required information is not found in the playbook - https://customerservice.cloudapps.cisco.com/

Cisco Calling Plans requirements and limitations

Requirements

Partners must be an authorized Webex Calling partner and have accepted the new Webex Calling addendum through enrollment into the Webex Calling PSTN program.
A minimum of one committed Outbound Calling Plan license must be purchased to enable access to all services associated with Cisco Calling Plans.

Limitations

Cisco Calling Plans are currently available to specified countries.
Existing Webex Calling locations or telephone numbers can only transition to Cisco Calling Plans in certain scenarios. For details on supported migration paths, refer Supported paths for PSTN migration section.
You can order a maximum of 100 new standard phone numbers at a time. Additional numbers can be placed as a separate order.
Toll-free numbers aren’t currently available. You can’t order new toll-free numbers or port existing toll-free numbers to the Cisco Calling Plans.
Cisco Calling Plans aren’t supported with Webex Contact Center or authorized for use in which high-concurrent calls or high-volume calls or uncommonly short or long calls are made. For more information about Webex Contact Center, see Get started with Webex Contact Center.
Some premium services and international destinations may not be available for operational purposes. If specific destinations which are not generally available are required, customers can open a support case to request availability.

Select your PSTN provider

The card view displays the PSTN provider available for the Webex Calling customer before configuring the PSTN location. The PSTN view displays both Providers and Orders.

The provider screen displays the various provider cards with the list of supported service types. The Providers section is classified into the following:

Preferred Calling providers
Certified Calling providers
Calling providers

The providers include the following:

Provider summary
List of locations configured with this provider
List of markets that the provider is available for the supported services.

If the customer has PSTN locations where Calling services aren’t set up, the Select this provider action bar displays. Use this option to configure the service for the PSTN location.

Select the location from the drop-down menu.
Choose the subscription type for the users to use the Cisco Calling plans. Click Next.
Complete the fields for Contract Information and Emergency Service Address configuration.

The PSTN service set up is now complete.

Cisco Calling Plans trials

Each trial account can provision up to 10 standard telephone numbers from Cisco Calling Plans with Webex Calling. It isn’t permitted to provision more than 10 numbers per trial.
Only new, standard telephone numbers are supported in trials. Ported numbers, consecutive blocks, and inbound toll-free numbers aren’t supported on trial accounts. You also cannot port numbers out of a trial. You must convert to a paid account if you wish to use these features.
International calling, along with Premium Service Call types I & II are blocked from use during the trial period.
Business Texting isn’t available on Webex Calling trial accounts.
Trial accounts are intended for technical evaluation purposes only, and not for normal commercial operation. As such, emergency services are only meant for technical evaluation; actual emergency calls can’t be guaranteed. Users shouldn’t place actual emergency service calls on a trial account.

Set up your Cisco Calling Plan

Once your Cisco Calling Plan service is enabled, you can select one of the PSTN options:

Cisco Calling Plans (Cisco PSTN)
Cloud Connected PSTN
Premise-based PSTN (Local Gateway must be enabled separately. For more information, see Configure Premises-based PSTN in Control Hub.)

1	From the customer view in https://admin.webex.com, go to Management > Locations and select the location you want to update.
2	Select the Calling tab and Click Manage next to PTSN Connection.
3	Select Cisco Calling Plans and click Next.
4	Enter the contact information and click Next. This field is for the contact information of the person who will sign the legal contract with Cisco.
5	Enter the Emergency Services Address (ESA), and click Save. By default, the ESA entered here is applied to all phone numbers for this location. You can change the ESA for an individual user if needed. For example, you may need to change the ESA if you have a remote employee who works from home.
6	On the summary screen, do one of the following: Add numbers. Click Done. You can add numbers to your calling plan later.

Order new phone numbers

A local telephony provider processes the new number request. Here is a list of legally required documents by the PSTN provider to provision the services:

For business identity verification:

Name of the authorizing person
Fiscal Code of the authorizing person
Date of Birth of the authorizing person
Place of Birth of the authorizing person
Gender of the authorizing person
Nationality of the authorizing person
Contact the phone number of the authorizing person.
Contact Email of the authorizing person
Passport or ID copy of the authorizing person
Company name
VAT number
Company incorporation certificate copy
Service description

For address verification:

Address matching the DID area code (street, building number, postal code, city, and country
A copy of a utility bill which is less than three months old.

It takes at least 5–7 business days for ordering and document approval.

Before you begin

Enable the Cisco Calling Plan for your site before you can order new phone numbers through Control Hub.
By default, the Emergency Service Address (ESA) entered for a location during your Cisco Calling Plan setup applies to all phone numbers for that location.

1	From the customer view in https://admin.webex.com, go to Calling and then click Numbers > Add Numbers.
2	Choose a location and click Select under Order New Numbers. Click Next. You’re directed to Contact Support for ordering new numbers.
3	Click Contact Support. Your location information populates on the Case Details Screen.
4	Indicate how many new numbers you’re requesting in the Number of Telephone Numbers Requested field.
5	Select your Number Type (Local or National) from the drop-down menu.
6	(Optional) Input additional details.
7	Click Submit. You receive a PSTN Order Number which displays on the PSTN order page.

Port phone numbers

Before you begin

As an administrator, you can move existing phone numbers from your current PSTN to the Cisco Calling Plan.

We strongly recommend you to read and familiarize yourself with the Cisco Calling Plan Number Porting Guidelines and Policies before you start porting the numbers.

Enable Cisco Calling Plan for your location before you port phone numbers through the Control Hub.
Submit a signed Letter of Agency (LOA), to authorize Cisco to place orders with the current PSTN carrier to move the service to Cisco. The current owner or an authorized signer must sign the LOA. You're prompted to sign the LOA while completing the porting steps.

Ensure that the LOA address is within the same area code as the porting phone numbers.
To ensure a successful port, make sure you have the following information ready:
- List of all phone numbers to port (non toll free)
- Current PSTN provider account information
- Local TAX/VAT Number or Company Registration Number
- Migration Code
- Latest Invoice
- Valid Passport/ID Card of the authorizing person
- Fiscal Code of the authorizing person
- Proof of Local Address (Utility Bill, and so on), dated from within the last three months
Porting Window– Ports in Italy can take place from Monday to Friday from 8 a.m. to 6 p.m..

Out of hours ports are requested on a case-by-case basis and depending on the carriers. Cisco can’t guarantee the availability of the out of hours porting.
Port Types
- Standard Ports: A porting process where a number is moved from one provider to another without any special circumstances or complexities.
  
  For example, porting a number from Carrier A to Carrier B within the same country and service area is a standard port.
- Mixed Operator Ports: A more complex porting situation that involves multiple operators or service providers.
  
  For instance, porting a range of numbers in a block that belong to two or more different range holders or Current Network Operators.
When planning for which numbers to port, we recommend that you consider any number that receives inbound calls. See Cisco Calling Plan Number Policy for more information.
By default, the Emergency Service Address (ESA) entered for a location during your Cisco Calling Plan setup is applied to all phone numbers for that location.

Port Cancellations and Rollbacks

If you choose to cancel or postpone a porting request even after receiving a go-ahead from your current carrier, bear in mind the following rules:

You can cancel or reschedule standard ports up to five working days before the port date.
You can cancel or reschedule Mixed Operator/Complex ports up to seven working days before the port date.

Once the port period ends, the number porting starts without the option to cancel or reschedule.
If a porting doesn’t happen then to roll back the numbers to the previous carrier, raise a case with the Cisco PTS team. Rollbacks aren’t always possible and may require to place the port back with the previous carrier.

To port numbers using the Control Hub, complete these steps:

1	From the customer view in https://admin.webex.com, go to Calling and click Numbers > Add Numbers.
2	Choose a location and click Select under Port numbers over. Click Next.
3	Add the phone numbers that you want to port, and then click Save & continue.
4	Enter the Date and Time by when you want the porting to finish. The schedule is set based on your preference. But it’s not guaranteed that the porting of your numbers is finished at the exact date and time selected.
5	(Optional) Enter an additional email address, other than the default contact listed, to receive notifications regarding the port order status.
6	Click Next.
7	Enter your current carrier account information in the fields provided. Make sure this matches the information on your previous carrier’s bill.
8	Click Next.
9	Upload your previous carrier bill (not older than 30 days).
10	Click Next.
11	Upload the LOA. The authorized contact for your previous carrier’s account needs to upload the signed LOA. Open a ticket with Webex Partner Help Center to get the LOA required for your country and upload the signed copy here. If you're not the authorized contact, skip this step for now. That person can come back and upload the signed LOA later, we’ll send your order contacts a reminder.
12	Click Save & continue.
13	Your Port Order is submitted. You can check the order status in PSTN Orders.
14	Click Done. Our support team contacts you for any additional documents requirements to complete your porting request. You can upload the requested documents in the right-hand panel of the order. The Firm Order Commitment (FOC) date can be two business days later from the submission date. An FOC is the date on which the losing carrier states that it releases a phone number to the winning carrier. After the losing carrier confirms the porting request, you can cancel or postpone the porting request as per the following rules: These timeframes are estimates and aren’t bound by any SLA. You can cancel or reschedule a standard porting operation to five working days before the porting date. You can cancel or reschedule a mixed operator porting operation to seven working days before the porting date. If porting takes place and you need to roll back the numbers to the previous carrier, raise such requests with the PTS team at the earliest. Rollbacks aren’t always possible and may require placing a port back request with the previous carrier.

Manage PSTN

When placing orders for new numbers or porting existing numbers, you can check the order status or port rejection notices in Control Hub.

A migration banner is displayed when there are locations which need to be migrated from Non-Integrated CCP to Integrated CCP.

From the customer view in https://admin.webex.com, go to Calling and click PSTN.

Every order submitted has a status value.
Select an order to check its status.

Status Values for New Number Orders

Displayed Status	Description

Pending	A New numbers order has been created by the user.
Provisioned	New numbers are provisioned.
Error	An issue is detected with the new numbers order. Create a TAC ticket to get help.
Action Required	Click to contact PTS for assistance.

Status Values for Ported Number Orders

Displayed Status	Description

Pending	User is in the process of creating/filling in details of the Porting Order. Once submitted, the order will still show Pending until Cisco validates and accepts the porting order.
Rejected	Porting issue is detected. See the Porting Errors table for additional details. If required, go to Control Hub and click on the PSTN Help link for PSTN technical support.
Submitted	Porting Order is validated and accepted.
FOC Received	FOC date confirmation from the previous PSTN provider received.
Completed	Porting process is complete.
Canceled	Order is canceled.

Porting Error Messages

Displayed Error	Description	How to fix

Account number mismatch	Account number doesn’t match the number on the Customer Service Record (CSR)	Update the Account Number field on the PSTN Order and resubmit. For some carriers, the account number may be the same as the BTN or the telephone number itself.
Account number required	The account number wasn't provided but is required.	Update the Account Number field on the PSTN Order and resubmit. For some carriers, the account number may be the same as the BTN or the telephone number itself.
Account name mismatch	The person authorizing doesn't match the name on the (CSR).	Update the Authorized name on account field on the PSTN order and resubmit.
BTN mismatch	BTN or ATN doesn’t match that on the CSR.	Update the Carrier billing phone number field on the PSTN Order and resubmit.
Company name mismatch	Entity name does not match that on the CSR.	Update the Company name with previous carrier field on the PSTN order and resubmit.
Multiple BTNs	The OSP requires this Porting Order to be split and submitted as separate orders.	Cancel the current PSTN order and create a new, multiple PSTN Orders. Create one for each group of numbers that have the same BTN.
FOC rejected by losing carrier	The FOC date requested can’t be accommodated by the OSP.	Update the Port Complete date field on the PSTN order and resubmit.
Unknown	Go to Control Hub and click on the PSTN Help link for PSTN technical support.	Go to Control Hub and click on the PSTN Help link for PSTN technical support.
Invalid PIN	Passcode/PIN must be provided for wireless port.	Update the PIN field on the PSTN order and resubmit.
Pending order	The OSP has a pending LSR on the account (for example, a port out or address change).	Remove the telephone numbers in question from the PSTN order and resubmit.
Pending main BTN	BTN is one of the phone numbers being ported. User must indicate Porting Order Type, Remaining Numbers Action, and New Billing Phone Number accordingly.	Remove the main BTN from the list of telephone numbers being ported and resubmit the order. Include the Main BTN into the last iteration of numbers (if porting numbers in multiple iterations).
Service address mismatch	The location info doesn't match that on the CSR.	Update the Service address, State, and City fields and resubmit the order.
TN has special feature	Some of the phone numbers can't be ported because they have a special feature (for example, remote call forward).	Remove numbers with special features from the PSTN order and resubmit. Or, unassign a special features from the numbers being ported.
TN mismatch	Some of the phone numbers don't belong to the end user.	Remove one or more numbers in question and resubmit the order.
TN not portable	Some of the phone numbers can't be ported because they're inactive or aren't part of the end user's account.	Try to remove one or more numbers in question and resubmit the PSTN order.
Unsupported rate center	The rate center isn't portable.	Remove one or more numbers in question and resubmit the order.
Zip/postal code mismatch	Postal code doesn't match the one on the CSR.	Update the Zip code field and resubmit the order.
Previous carrier's bill is invalid	The invoice is invalid.	Go to PSTN Order details, then open Previous Carrier’s Bill section. Upload the correct bill file and resubmit the order.
LOA invalid	The LOA is invalid.	Sign the LOA and resubmit the PSTN order. Alternatively, go to Control Hub and click on the PSTN Help link for PSTN technical support.

PSTN – Public Switched Telephone Network

CSR – Customer Service Record

FOC – Firm Order Commitment

OSP – Old Service Provider

BTN – Billing Telephone Number

ATN – Account Telephone Number

Change the emergency service address for a user

1	From the customer view in https://admin.webex.com, go to Users.
2	Select the user you want to modify and click Calling.
3	Select the primary phone number under Directory Numbers.
4	Under Emergency Service Address, select Custom Address.
5	Update the information for the user and click Save.

Change the emergency service address for a location

Once a location is set up with the Cisco Calling Plan, you can update the Emergency Service Address.

1	From the customer view in https://admin.webex.com, go to Management > Locations and select the location you want to update.
2	Next to PSTN Connection, click Manage.
3	Next to the Emergency Service Address, click Edit.
4	Enter the new addres and click Save.

Supported paths for PSTN migration

Use this matrix to know the potential PSTN migration paths for Webex Calling.

Webex Calling supports the following PSTN migration paths:

Using Self Service through Control Hub
- Premises-based PSTN, non-integrated CCPP, and non-integrated IntelePeer to Cisco Calling Plans. See Migrate to Cisco Calling plans.
- Non-integrated CCP to Integrated CCP. See, Migrating from Non-Integrated CCP to Integrated CCP (webex.com)
- Non-integrated CCP Provider including non-integrated Intelepeer to a Premises-based Solution. See, Configure premises-based PSTN in Control Hub
Using Manual Migration
- Premises-based solution to Integrated CCP Provider
- Integrated CCP Provider to Non-integrated CCP Provider (Exception: Non-integrated Intelepeer isn’t supported as the target CCP Provider)
- Integrated CCP Provider to Premises-based Solution

Here’s a list of unsupported PSTN migration paths:

Cisco Calling Plans to integrated Intelepeer
Integrated Intelepeer to Cisco Calling Plans

Your Cisco Calling Plan bill

When your billing begins:

Outbound Calling Plans ordered in CCW begin billing on the requested service date (RSD).
Outbound Calling Plans provisioned in Control Hub begin billing immediately.
Phone numbers provisioned in Control Hub begin billing immediately or, if ported from another provider, will begin billing upon port completion.

Outbound calling plan rates:

Rates for the Outbound Calling Plans and phone numbers are pro-rated using the same proration methord used to calculate the rates for the Webex Calling licenses.
International calling rates vary by country and are billed the month following usage.

Find support for Cisco Calling Plans

Cisco Calling Plans support is provided by various support divisions, depending on your need.

Table 13. Cisco Support Contact Information
Support Division	Purpose	Contact Information
Partner Help Desk (PHD)	Partner how-to and/or documentation inquiries, Pre-quoting Regulatory Tax and other enquiries about the Cisco Calling Plans offering.	North America: 1-844-613-6108 EMEA: +44 129 366 10 20 APAC: +61 3 7017 7272 Email: webexcalling-phd@cisco.com
PSTN Technical Support (PTS)	Partner/Customer PSTN-related questions Port order expedite requests Port date reschedules Port rejections Specific date/time requests for a port Port date changes post FOC (Firm Order Commitment) Order cancellations	Go to Control Hub and click on PSTN Help link for PSTN technical support.
TAC	Issues with Control Hub functionality Issues with service, such as dropped calls, call quality issues, or service outages	North America: 1-800-553-2447 EMEA: +32 2 704 5555 APAC: +61 2 8446 7411 Email: tac@cisco.com See also: Help with TAC Open a support case
Invoice & Collections	VAT, Payment and other invoicing queries	Contact the Collector on the Invoice via email or phone
Cisco SaaS Support Team (CES)	Quoting Order Booking & Management Provisioning Subscription Management Billing & Invoicing Disputes	Refer Partner Support Playbook and Cisco Calling Plans FAQ Create a case through link below if the required information is not found in the playbook - https://customerservice.cloudapps.cisco.com/

Cisco Calling Plans requirements and limitations

Requirements

Partners must be an authorized Webex Calling partner and have accepted the new Webex Calling addendum through enrollment into the Webex Calling PSTN program.
A minimum of one committed Outbound Calling Plan license must be purchased to enable access to all services associated with Cisco Calling Plans.

Limitations

Cisco Calling Plans are currently available to specified countries.
Existing Webex Calling locations or telephone numbers can only transition to Cisco Calling Plans in certain scenarios. For details on supported migration paths, refer Supported paths for PSTN migration section.
You can order a maximum of 100 new standard phone numbers at a time. Additional numbers can be placed as a separate order.
Toll-free numbers aren’t currently available. You can’t order new toll-free numbers or port existing toll-free numbers to the Cisco Calling Plans.
Cisco Calling Plans aren’t supported with Webex Contact Center or authorized for use in which high-concurrent calls or high-volume calls or uncommonly short or long calls are made. For more information about Webex Contact Center, see Get started with Webex Contact Center.
Some premium services and international destinations may not be available for operational purposes. If specific destinations which are not generally available are required, customers can open a support case to request availability.

Select your PSTN provider

The card view displays the PSTN provider available for the Webex Calling customer before configuring the PSTN location. The PSTN view displays both Providers and Orders.

The provider screen displays the various provider cards with the list of supported service types. The Providers section is classified into the following:

Preferred Calling providers
Certified Calling providers
Calling providers

The providers include the following:

Provider summary
List of locations configured with this provider
List of markets that the provider is available for the supported services.

If the customer has PSTN locations where Calling services aren’t set up, the Select this provider action bar displays. Use this option to configure the service for the PSTN location.

Select the location from the drop-down menu.
Choose the subscription type for the users to use the Cisco Calling plans. Click Next.
Complete the fields for Contract Information and Emergency Service Address configuration.

The PSTN service set up is now complete.

Cisco Calling Plans trials

Each trial account can provision up to 10 standard telephone numbers from Cisco Calling Plans with Webex Calling. It isn’t permitted to provision more than 10 numbers per trial.
Only new, standard telephone numbers are supported in trials. Ported numbers, consecutive blocks, and inbound toll-free numbers aren’t supported on trial accounts. You also cannot port numbers out of a trial. You must convert to a paid account if you wish to use these features.
International calling, along with Premium Service Call types I & II are blocked from use during the trial period.
Business Texting isn’t available on Webex Calling trial accounts.
Trial accounts are intended for technical evaluation purposes only, and not for normal commercial operation. As such, emergency services are only meant for technical evaluation; actual emergency calls can’t be guaranteed. Users shouldn’t place actual emergency service calls on a trial account.

Set up your Cisco Calling Plan

Once your Cisco Calling Plan service is enabled, you can select one of the PSTN options:

Cisco Calling Plans (Cisco PSTN)
Cloud Connected PSTN
Premise-based PSTN (Local Gateway must be enabled separately. For more information, see Configure Premises-based PSTN in Control Hub.)

1	From the customer view in https://admin.webex.com, go to Management > Locations and select the location you want to update.
2	Select the Calling tab and Click Manage next to PTSN Connection.
3	Select Cisco Calling Plans and click Next.
4	Enter the contact information and click Next. This field is for the contact information of the person who will sign the legal contract with Cisco.
5	Enter the Emergency Services Address (ESA), and click Save. By default, the ESA entered here is applied to all phone numbers for this location. You can change the ESA for an individual user if needed. For example, you may need to change the ESA if you have a remote employee who works from home.
6	On the summary screen, do one of the following: Add numbers. Click Done. You can add numbers to your calling plan later.

Order new phone numbers

Before you begin

Enable the Cisco Calling Plan for your site before you order new phone numbers through Control Hub.
By default, the Emergency Service Address (ESA) entered for a location during your Cisco Calling Plan setup is applied to all phone numbers for that location.
Provide the following information for business identity verification:
- First name and last name of the legal representative
- Contact phone number
- Company name
- Local company registration certificate
Provide the following information for address verification:
- Address matching the DID area code (street, building number, postal code, city, and country)
- Proof of address, not older than last three months

Additionally, you must submit a copy of your passport or ID card in the Netherlands, Switzerland, Poland, Greece, and Lithuania. You must provide VAT ID in Sweden and Greece.

1	From the customer view in https://admin.webex.com, go to Calling and then click Numbers > Add Numbers.
2	Choose a location and click Select under Order new numbers. Click Next. You’re directed to Contact Support to order a new numbers.
3	Click Contact Support. Your location information is automatically populated on the Case Details window.
4	Indicate how many new numbers you’re requesting in the Number of Telephone Numbers Requested field.
5	From the Number Type drop-down list, choose Local or National as the case maybe.
6	(Optional) Enter the additional details.
7	Click Submit. You receive a PSTN Order Number which displays on the PSTN order page. It can take up to five to seven business days for the ordering and document approval process.

Port phone numbers

Before you begin

We strongly recommend you to read and familiarize yourself with the Cisco Calling Plan Number Porting Guidelines and Policies before you start porting the numbers.

Enable Cisco Calling Plan for your location before you port phone numbers through Control Hub.
A signed Letter of Agency (LOA) is needed, authorizing Cisco to place orders with the current PSTN carrier to move the service to Cisco. The LOA must be signed by the current account owner or authorized signer. You're prompted to sign the LOA while completing the porting steps.
Make sure you have a recent bill in PNG or PDF format from your current PSTN provider. The bill must not be older than 30 days. While completing the porting steps, you’re prompted to upload a copy of your bill.
For successful porting, ensure that you have the following information ready:
- List of all phone numbers to port (non-toll free)
- Current PSTN provider account information
- Customer Service Record (CSR) if available
- Your account PIN if one exists
- VAT number or Tax ID
When planning for which numbers to port, we recommend that you consider any number that receives inbound calls. See Cisco Calling Plan Number Policy for more information.
By default, the Emergency Service Address (ESA) entered for a location during your Cisco Calling Plan setup is applied to all phone numbers for that location.

As an administrator, you can move existing phone numbers from your current PSTN to the Cisco Calling Plan option. The following are the types of porting services:

Standard port: When a phone number moves from one service provider to another, without any special circumstances. For example, porting a number from Carrier A to Carrier B within the same country and service area is a Standard port.
Mixed operator port: A more complex porting situation that involves multiple operators or service providers. For example, porting a range of numbers in a block that belongs to two or more network operators is a Mixed operator port.

Porting of numbers is done in a fixed time slot in the following countries:

Porting time slot	Countries
Monday to Friday between 8 a.m. to 3 p.m.	Switzerland, Belgium, Sweden
Monday to Friday between 9 a.m. to 4 p.m.	Netherlands, Lithuania, Luxembourg, Denmark
Monday to Friday between 8 a.m. to 5 p.m.	Finland

Requests for porting out of hours are on a case-by-case basis and depend on the carriers involved. We can’t guarantee that out of hours porting is available.

1	From the customer view in https://admin.webex.com, go to Calling and click Numbers > Add Numbers.
2	Choose a location and click Select under Port numbers over. Click Next.
3	Add the phone numbers that you want to port, and then click Save & continue.
4	Enter the Date and Time by when you want the porting to finish. The schedule is set based on your preference. But it’s not guaranteed that the porting of your numbers is finished at the exact date and time selected.
5	(Optional) Enter an additional email address, other than the default contact listed, to receive notifications regarding the port order status.
6	Click Next.
7	Enter your current carrier account information in the fields provided. Make sure this matches the information on your previous carrier’s bill.
8	Click Next.
9	Upload your previous carrier bill (not older than 30 days).
10	Click Next.
11	Upload the LOA. The authorized contact for your previous carrier’s account needs to upload the signed LOA. Open a ticket with Webex Partner Help Center to get the LOA required for your country and upload the signed copy here. If you're not the authorized contact, skip this step for now. That person can come back and upload the signed LOA later, we’ll send your order contacts a reminder.
12	Click Save & continue.
13	Your Port Order is submitted. You can check the order status in PSTN Orders.
14	Click Done. Our support team contacts you for any additional documents requirements to complete your porting request. You can upload the requested documents in the right-hand panel of the order. The Firm Order Commitment (FOC) date can be two business days later from the submission date. An FOC is the date on which the losing carrier states that it releases a phone number to the winning carrier. After the losing carrier confirms the porting request, you can cancel or postpone the porting request as per the following rules: These timeframes are estimates and aren’t bound by any SLA. You can cancel or reschedule a standard porting operation to five working days before the porting date. You can cancel or reschedule a mixed operator porting operation to seven working days before the porting date. If porting takes place and you need to roll back the numbers to the previous carrier, raise such requests with the PTS team at the earliest. Rollbacks aren’t always possible and may require placing a port back request with the previous carrier.

Manage PSTN

When placing orders for new numbers or porting existing numbers, you can check the order status or port rejection notices in Control Hub.

A migration banner is displayed when there are locations which need to be migrated from Non-Integrated CCP to Integrated CCP.

From the customer view in https://admin.webex.com, go to Calling and click PSTN.

Every order submitted has a status value.
Select an order to check its status.

Status Values for New Number Orders

Displayed Status	Description

Pending	A New numbers order has been created by the user.
Provisioned	New numbers are provisioned.
Error	An issue is detected with the new numbers order. Create a TAC ticket to get help.
Action Required	Click to contact PTS for assistance.

Status Values for Ported Number Orders

Displayed Status	Description

Pending	User is in the process of creating/filling in details of the Porting Order. Once submitted, the order will still show Pending until Cisco validates and accepts the porting order.
Rejected	Porting issue is detected. See the Porting Errors table for additional details. If required, go to Control Hub and click on the PSTN Help link for PSTN technical support.
Submitted	Porting Order is validated and accepted.
FOC Received	FOC date confirmation from the previous PSTN provider received.
Completed	Porting process is complete.
Canceled	Order is canceled.

Porting Error Messages

Displayed Error	Description	How to fix

Account number mismatch	Account number doesn’t match the number on the Customer Service Record (CSR)	Update the Account Number field on the PSTN Order and resubmit. For some carriers, the account number may be the same as the BTN or the telephone number itself.
Account number required	The account number wasn't provided but is required.	Update the Account Number field on the PSTN Order and resubmit. For some carriers, the account number may be the same as the BTN or the telephone number itself.
Account name mismatch	The person authorizing doesn't match the name on the (CSR).	Update the Authorized name on account field on the PSTN order and resubmit.
BTN mismatch	BTN or ATN doesn’t match that on the CSR.	Update the Carrier billing phone number field on the PSTN Order and resubmit.
Company name mismatch	Entity name does not match that on the CSR.	Update the Company name with previous carrier field on the PSTN order and resubmit.
Multiple BTNs	The OSP requires this Porting Order to be split and submitted as separate orders.	Cancel the current PSTN order and create a new, multiple PSTN Orders. Create one for each group of numbers that have the same BTN.
FOC rejected by losing carrier	The FOC date requested can’t be accommodated by the OSP.	Update the Port Complete date field on the PSTN order and resubmit.
Unknown	Go to Control Hub and click on the PSTN Help link for PSTN technical support.	Go to Control Hub and click on the PSTN Help link for PSTN technical support.
Invalid PIN	Passcode/PIN must be provided for wireless port.	Update the PIN field on the PSTN order and resubmit.
Pending order	The OSP has a pending LSR on the account (for example, a port out or address change).	Remove the telephone numbers in question from the PSTN order and resubmit.
Pending main BTN	BTN is one of the phone numbers being ported. User must indicate Porting Order Type, Remaining Numbers Action, and New Billing Phone Number accordingly.	Remove the main BTN from the list of telephone numbers being ported and resubmit the order. Include the Main BTN into the last iteration of numbers (if porting numbers in multiple iterations).
Service address mismatch	The location info doesn't match that on the CSR.	Update the Service address, State, and City fields and resubmit the order.
TN has special feature	Some of the phone numbers can't be ported because they have a special feature (for example, remote call forward).	Remove numbers with special features from the PSTN order and resubmit. Or, unassign a special features from the numbers being ported.
TN mismatch	Some of the phone numbers don't belong to the end user.	Remove one or more numbers in question and resubmit the order.
TN not portable	Some of the phone numbers can't be ported because they're inactive or aren't part of the end user's account.	Try to remove one or more numbers in question and resubmit the PSTN order.
Unsupported rate center	The rate center isn't portable.	Remove one or more numbers in question and resubmit the order.
Zip/postal code mismatch	Postal code doesn't match the one on the CSR.	Update the Zip code field and resubmit the order.
Previous carrier's bill is invalid	The invoice is invalid.	Go to PSTN Order details, then open Previous Carrier’s Bill section. Upload the correct bill file and resubmit the order.
LOA invalid	The LOA is invalid.	Sign the LOA and resubmit the PSTN order. Alternatively, go to Control Hub and click on the PSTN Help link for PSTN technical support.

PSTN – Public Switched Telephone Network

CSR – Customer Service Record

FOC – Firm Order Commitment

OSP – Old Service Provider

BTN – Billing Telephone Number

ATN – Account Telephone Number

Change the emergency service address for a user

1	From the customer view in https://admin.webex.com, go to Users.
2	Select the user you want to modify and click Calling.
3	Select the primary phone number under Directory Numbers.
4	Under Emergency Service Address, select Custom Address.
5	Update the information for the user and click Save.

Change the emergency service address for a location

Once a location is set up with the Cisco Calling Plan, you can update the Emergency Service Address.

1	From the customer view in https://admin.webex.com, go to Management > Locations and select the location you want to update.
2	Next to PSTN Connection, click Manage.
3	Next to the Emergency Service Address, click Edit.
4	Enter the new addres and click Save.

Supported paths for PSTN migration

Use this matrix to know the potential PSTN migration paths for Webex Calling.

Webex Calling supports the following PSTN migration paths:

Using Self Service through Control Hub
- Premises-based PSTN, non-integrated CCPP, and non-integrated IntelePeer to Cisco Calling Plans. See Migrate to Cisco Calling plans.
- Non-integrated CCP to Integrated CCP. See, Migrating from Non-Integrated CCP to Integrated CCP (webex.com)
- Non-integrated CCP Provider including non-integrated Intelepeer to a Premises-based Solution. See, Configure premises-based PSTN in Control Hub
Using Manual Migration
- Premises-based solution to Integrated CCP Provider
- Integrated CCP Provider to Non-integrated CCP Provider (Exception: Non-integrated Intelepeer isn’t supported as the target CCP Provider)
- Integrated CCP Provider to Premises-based Solution

Here’s a list of unsupported PSTN migration paths:

Cisco Calling Plans to integrated Intelepeer
Integrated Intelepeer to Cisco Calling Plans

Your Cisco Calling Plan bill

When your billing begins:

Outbound Calling Plans ordered in CCW begin billing on the requested service date (RSD).
Outbound Calling Plans provisioned in Control Hub begin billing immediately.
Phone numbers provisioned in Control Hub begin billing immediately or, if ported from another provider, will begin billing upon port completion.

Outbound calling plan rates:

Rates for the Outbound Calling Plans and phone numbers are pro-rated using the same proration methord used to calculate the rates for the Webex Calling licenses.
International calling rates vary by country and are billed the month following usage.

Find support for Cisco Calling Plans

Cisco Calling Plans support is provided by various support divisions, depending on your need.

Table 15. Cisco Support Contact Information
Support Division	Purpose	Contact Information
Partner Help Desk (PHD)	Partner how-to and/or documentation inquiries, Pre-quoting Regulatory Tax and other enquiries about the Cisco Calling Plans offering.	North America: 1-844-613-6108 EMEA: +44 129 366 10 20 APAC: +61 3 7017 7272 Email: webexcalling-phd@cisco.com
PSTN Technical Support (PTS)	Partner/Customer PSTN-related questions Port order expedite requests Port date reschedules Port rejections Specific date/time requests for a port Port date changes post FOC (Firm Order Commitment) Order cancellations	Go to Control Hub and click on PSTN Help link for PSTN technical support.
TAC	Issues with Control Hub functionality Issues with service, such as dropped calls, call quality issues, or service outages	North America: 1-800-553-2447 EMEA: +32 2 704 5555 APAC: +61 2 8446 7411 Email: tac@cisco.com See also: Help with TAC Open a support case
Invoice & Collections	VAT, Payment and other invoicing queries	Contact the Collector on the Invoice via email or phone
Cisco SaaS Support Team (CES)	Quoting Order Booking & Management Provisioning Subscription Management Billing & Invoicing Disputes	Refer Partner Support Playbook and Cisco Calling Plans FAQ Create a case through link below if the required information is not found in the playbook - https://customerservice.cloudapps.cisco.com/

Cisco Calling Plans requirements and limitations

Requirements

Partners must be an authorized Webex Calling partner and have accepted the new Webex Calling addendum through enrollment into the Webex Calling PSTN program.
A minimum of one committed Outbound Calling Plan license must be purchased to enable access to all services associated with Cisco Calling Plans.

Limitations

Cisco Calling Plans are currently available to specified countries.
Existing Webex Calling locations or telephone numbers can only transition to Cisco Calling Plans in certain scenarios. For details on supported migration paths, refer Supported paths for PSTN migration section.
You can order a maximum of 100 new standard phone numbers at a time. Additional numbers can be placed as a separate order.
Toll-free numbers aren’t currently available. You can’t order new toll-free numbers or port existing toll-free numbers to the Cisco Calling Plans.
Cisco Calling Plans aren’t supported with Webex Contact Center or authorized for use in which high-concurrent calls or high-volume calls or uncommonly short or long calls are made. For more information about Webex Contact Center, see Get started with Webex Contact Center.
Some premium services and international destinations may not be available for operational purposes. If specific destinations which are not generally available are required, customers can open a support case to request availability.

Select your PSTN provider

The card view displays the PSTN provider available for the Webex Calling customer before configuring the PSTN location. The PSTN view displays both Providers and Orders.

The provider screen displays the various provider cards with the list of supported service types. The Providers section is classified into the following:

Preferred Calling providers
Certified Calling providers
Calling providers

The providers include the following:

Provider summary
List of locations configured with this provider
List of markets that the provider is available for the supported services.

If the customer has PSTN locations where Calling services aren’t set up, the Select this provider action bar displays. Use this option to configure the service for the PSTN location.

Select the location from the drop-down menu.
Choose the subscription type for the users to use the Cisco Calling plans. Click Next.
Complete the fields for Contract Information and Emergency Service Address configuration.

The PSTN service set up is now complete.

Cisco Calling Plans trials

Each trial account can provision up to 10 standard telephone numbers from Cisco Calling Plans with Webex Calling. It isn’t permitted to provision more than 10 numbers per trial.
Only new, standard telephone numbers are supported in trials. Ported numbers, consecutive blocks, and inbound toll-free numbers aren’t supported on trial accounts. You also cannot port numbers out of a trial. You must convert to a paid account if you wish to use these features.
International calling, along with Premium Service Call types I & II are blocked from use during the trial period.
Business Texting isn’t available on Webex Calling trial accounts.
Trial accounts are intended for technical evaluation purposes only, and not for normal commercial operation. As such, emergency services are only meant for technical evaluation; actual emergency calls can’t be guaranteed. Users shouldn’t place actual emergency service calls on a trial account.

Set up your Cisco Calling Plan

Once your Cisco Calling Plan service is enabled, you can select one of the PSTN options:

Cisco Calling Plans (Cisco PSTN)
Cloud Connected PSTN
Premise-based PSTN (Local Gateway must be enabled separately. For more information, see Configure Premises-based PSTN in Control Hub.)

1	From the customer view in https://admin.webex.com, go to Management > Locations and select the location you want to update.
2	Select the Calling tab and Click Manage next to PTSN Connection.
3	Select Cisco Calling Plans and click Next.
4	Enter the contact information and click Next. This field is for the contact information of the person who will sign the legal contract with Cisco.
5	Enter the Emergency Services Address (ESA), and click Save. By default, the ESA entered here is applied to all phone numbers for this location. You can change the ESA for an individual user if needed. For example, you may need to change the ESA if you have a remote employee who works from home.
6	On the summary screen, do one of the following: Add numbers. Click Done. You can add numbers to your calling plan later.

Order new phone numbers

Before you begin

Enable the Cisco Calling Plan for your site before you order new phone numbers through Control Hub.
By default, the Emergency Service Address (ESA) entered for a location during your Cisco Calling Plan setup is applied to all phone numbers for that location.
Provide the following information for business identity verification:
- First name and last name of the legal representative
- Contact phone number
- Company name
- Local company registration certificate
Provide the following information for address verification:
- Address matching the DID area code (street, building number, postal code, city, and country)
- Proof of address, not older than last three months

Additionally, you must submit a copy of your passport or ID card in the Netherlands, Switzerland, Poland, Greece, and Lithuania. You must provide VAT ID in Sweden and Greece.

1	From the customer view in https://admin.webex.com, go to Calling and then click Numbers > Add Numbers.
2	Choose a location and click Select under Order new numbers. Click Next. You’re directed to Contact Support to order a new numbers.
3	Click Contact Support. Your location information is automatically populated on the Case Details window.
4	Indicate how many new numbers you’re requesting in the Number of Telephone Numbers Requested field.
5	From the Number Type drop-down list, choose Local or National as the case maybe.
6	(Optional) Enter the additional details.
7	Click Submit. You receive a PSTN Order Number which displays on the PSTN order page. It can take up to five to seven business days for the ordering and document approval process.

Port phone numbers

Before you begin

We strongly recommend you to read and familiarize yourself with the Cisco Calling Plan Number Porting Guidelines and Policies before you start porting the numbers.

Enable Cisco Calling Plan for your location before you port phone numbers through Control Hub.
A signed Letter of Agency (LOA) is needed, authorizing Cisco to place orders with the current PSTN carrier to move the service to Cisco. The LOA must be signed by the current account owner or authorized signer. You're prompted to sign the LOA while completing the porting steps.
Make sure you have a recent bill in PNG or PDF format from your current PSTN provider. The bill must not be older than 30 days. While completing the porting steps, you’re prompted to upload a copy of your bill.
For successful porting, ensure that you have the following information ready:
- List of all phone numbers to port (non-toll free)
- Current PSTN provider account information
- Customer Service Record (CSR) if available
- Your account PIN if one exists
- VAT number or Tax ID
When planning for which numbers to port, we recommend that you consider any number that receives inbound calls. See Cisco Calling Plan Number Policy for more information.
By default, the Emergency Service Address (ESA) entered for a location during your Cisco Calling Plan setup is applied to all phone numbers for that location.

As an administrator, you can move existing phone numbers from your current PSTN to the Cisco Calling Plan option. The following are the types of porting services:

Standard port: When a phone number moves from one service provider to another, without any special circumstances. For example, porting a number from Carrier A to Carrier B within the same country and service area is a Standard port.
Mixed operator port: A more complex porting situation that involves multiple operators or service providers. For example, porting a range of numbers in a block that belongs to two or more network operators is a Mixed operator port.

Porting of numbers is done in a fixed time slot in the following countries:

Porting time slot	Countries
Monday to Friday between 8 a.m. to 3 p.m.	Switzerland, Belgium, Sweden
Monday to Friday between 9 a.m. to 4 p.m.	Netherlands, Lithuania, Luxembourg, Denmark
Monday to Friday between 8 a.m. to 5 p.m.	Finland

Requests for porting out of hours are on a case-by-case basis and depend on the carriers involved. We can’t guarantee that out of hours porting is available.

1	From the customer view in https://admin.webex.com, go to Calling and click Numbers > Add Numbers.
2	Choose a location and click Select under Port numbers over. Click Next.
3	Add the phone numbers that you want to port, and then click Save & continue.
4	Enter the Date and Time by when you want the porting to finish. The schedule is set based on your preference. But it’s not guaranteed that the porting of your numbers is finished at the exact date and time selected.
5	(Optional) Enter an additional email address, other than the default contact listed, to receive notifications regarding the port order status.
6	Click Next.
7	Enter your current carrier account information in the fields provided. Make sure this matches the information on your previous carrier’s bill.
8	Click Next.
9	Upload your previous carrier bill (not older than 30 days).
10	Click Next.
11	Upload the LOA. The authorized contact for your previous carrier’s account needs to upload the signed LOA. Open a ticket with Webex Partner Help Center to get the LOA required for your country and upload the signed copy here. If you're not the authorized contact, skip this step for now. That person can come back and upload the signed LOA later, we’ll send your order contacts a reminder.
12	Click Save & continue.
13	Your Port Order is submitted. You can check the order status in PSTN Orders.
14	Click Done. Our support team contacts you for any additional documents requirements to complete your porting request. You can upload the requested documents in the right-hand panel of the order. The Firm Order Commitment (FOC) date can be two business days later from the submission date. An FOC is the date on which the losing carrier states that it releases a phone number to the winning carrier. After the losing carrier confirms the porting request, you can cancel or postpone the porting request as per the following rules: These timeframes are estimates and aren’t bound by any SLA. You can cancel or reschedule a standard porting operation to five working days before the porting date. You can cancel or reschedule a mixed operator porting operation to seven working days before the porting date. If porting takes place and you need to roll back the numbers to the previous carrier, raise such requests with the PTS team at the earliest. Rollbacks aren’t always possible and may require placing a port back request with the previous carrier.

Manage PSTN

When placing orders for new numbers or porting existing numbers, you can check the order status or port rejection notices in Control Hub.

A migration banner is displayed when there are locations which need to be migrated from Non-Integrated CCP to Integrated CCP.

From the customer view in https://admin.webex.com, go to Calling and click PSTN.

Every order submitted has a status value.
Select an order to check its status.

Status Values for New Number Orders

Displayed Status	Description

Pending	A New numbers order has been created by the user.
Provisioned	New numbers are provisioned.
Error	An issue is detected with the new numbers order. Create a TAC ticket to get help.
Action Required	Click to contact PTS for assistance.

Status Values for Ported Number Orders

Displayed Status	Description

Pending	User is in the process of creating/filling in details of the Porting Order. Once submitted, the order will still show Pending until Cisco validates and accepts the porting order.
Rejected	Porting issue is detected. See the Porting Errors table for additional details. If required, go to Control Hub and click on the PSTN Help link for PSTN technical support.
Submitted	Porting Order is validated and accepted.
FOC Received	FOC date confirmation from the previous PSTN provider received.
Completed	Porting process is complete.
Canceled	Order is canceled.

Porting Error Messages

Displayed Error	Description	How to fix

Account number mismatch	Account number doesn’t match the number on the Customer Service Record (CSR)	Update the Account Number field on the PSTN Order and resubmit. For some carriers, the account number may be the same as the BTN or the telephone number itself.
Account number required	The account number wasn't provided but is required.	Update the Account Number field on the PSTN Order and resubmit. For some carriers, the account number may be the same as the BTN or the telephone number itself.
Account name mismatch	The person authorizing doesn't match the name on the (CSR).	Update the Authorized name on account field on the PSTN order and resubmit.
BTN mismatch	BTN or ATN doesn’t match that on the CSR.	Update the Carrier billing phone number field on the PSTN Order and resubmit.
Company name mismatch	Entity name does not match that on the CSR.	Update the Company name with previous carrier field on the PSTN order and resubmit.
Multiple BTNs	The OSP requires this Porting Order to be split and submitted as separate orders.	Cancel the current PSTN order and create a new, multiple PSTN Orders. Create one for each group of numbers that have the same BTN.
FOC rejected by losing carrier	The FOC date requested can’t be accommodated by the OSP.	Update the Port Complete date field on the PSTN order and resubmit.
Unknown	Go to Control Hub and click on the PSTN Help link for PSTN technical support.	Go to Control Hub and click on the PSTN Help link for PSTN technical support.
Invalid PIN	Passcode/PIN must be provided for wireless port.	Update the PIN field on the PSTN order and resubmit.
Pending order	The OSP has a pending LSR on the account (for example, a port out or address change).	Remove the telephone numbers in question from the PSTN order and resubmit.
Pending main BTN	BTN is one of the phone numbers being ported. User must indicate Porting Order Type, Remaining Numbers Action, and New Billing Phone Number accordingly.	Remove the main BTN from the list of telephone numbers being ported and resubmit the order. Include the Main BTN into the last iteration of numbers (if porting numbers in multiple iterations).
Service address mismatch	The location info doesn't match that on the CSR.	Update the Service address, State, and City fields and resubmit the order.
TN has special feature	Some of the phone numbers can't be ported because they have a special feature (for example, remote call forward).	Remove numbers with special features from the PSTN order and resubmit. Or, unassign a special features from the numbers being ported.
TN mismatch	Some of the phone numbers don't belong to the end user.	Remove one or more numbers in question and resubmit the order.
TN not portable	Some of the phone numbers can't be ported because they're inactive or aren't part of the end user's account.	Try to remove one or more numbers in question and resubmit the PSTN order.
Unsupported rate center	The rate center isn't portable.	Remove one or more numbers in question and resubmit the order.
Zip/postal code mismatch	Postal code doesn't match the one on the CSR.	Update the Zip code field and resubmit the order.
Previous carrier's bill is invalid	The invoice is invalid.	Go to PSTN Order details, then open Previous Carrier’s Bill section. Upload the correct bill file and resubmit the order.
LOA invalid	The LOA is invalid.	Sign the LOA and resubmit the PSTN order. Alternatively, go to Control Hub and click on the PSTN Help link for PSTN technical support.

PSTN – Public Switched Telephone Network

CSR – Customer Service Record

FOC – Firm Order Commitment

OSP – Old Service Provider

BTN – Billing Telephone Number

ATN – Account Telephone Number

Change the emergency service address for a user

1	From the customer view in https://admin.webex.com, go to Users.
2	Select the user you want to modify and click Calling.
3	Select the primary phone number under Directory Numbers.
4	Under Emergency Service Address, select Custom Address.
5	Update the information for the user and click Save.

Change the emergency service address for a location

Once a location is set up with the Cisco Calling Plan, you can update the Emergency Service Address.

1	From the customer view in https://admin.webex.com, go to Management > Locations and select the location you want to update.
2	Next to PSTN Connection, click Manage.
3	Next to the Emergency Service Address, click Edit.
4	Enter the new addres and click Save.

Supported paths for PSTN migration

Use this matrix to know the potential PSTN migration paths for Webex Calling.

Webex Calling supports the following PSTN migration paths:

Using Self Service through Control Hub
- Premises-based PSTN, non-integrated CCPP, and non-integrated IntelePeer to Cisco Calling Plans. See Migrate to Cisco Calling plans.
- Non-integrated CCP to Integrated CCP. See, Migrating from Non-Integrated CCP to Integrated CCP (webex.com)
- Non-integrated CCP Provider including non-integrated Intelepeer to a Premises-based Solution. See, Configure premises-based PSTN in Control Hub
Using Manual Migration
- Premises-based solution to Integrated CCP Provider
- Integrated CCP Provider to Non-integrated CCP Provider (Exception: Non-integrated Intelepeer isn’t supported as the target CCP Provider)
- Integrated CCP Provider to Premises-based Solution

Here’s a list of unsupported PSTN migration paths:

Cisco Calling Plans to integrated Intelepeer
Integrated Intelepeer to Cisco Calling Plans

Your Cisco Calling Plan bill

When your billing begins:

Outbound Calling Plans ordered in CCW begin billing on the requested service date (RSD).
Outbound Calling Plans provisioned in Control Hub begin billing immediately.
Phone numbers provisioned in Control Hub begin billing immediately or, if ported from another provider, will begin billing upon port completion.

Outbound calling plan rates:

Rates for the Outbound Calling Plans and phone numbers are pro-rated using the same proration methord used to calculate the rates for the Webex Calling licenses.
International calling rates vary by country and are billed the month following usage.

Find support for Cisco Calling Plans

Cisco Calling Plans support is provided by various support divisions, depending on your need.

Table 17. Cisco Support Contact Information
Support Division	Purpose	Contact Information
Partner Help Desk (PHD)	Partner how-to and/or documentation inquiries, Pre-quoting Regulatory Tax and other enquiries about the Cisco Calling Plans offering.	North America: 1-844-613-6108 EMEA: +44 129 366 10 20 APAC: +61 3 7017 7272 Email: webexcalling-phd@cisco.com
PSTN Technical Support (PTS)	Partner/Customer PSTN-related questions Port order expedite requests Port date reschedules Port rejections Specific date/time requests for a port Port date changes post FOC (Firm Order Commitment) Order cancellations	Go to Control Hub and click on PSTN Help link for PSTN technical support.
TAC	Issues with Control Hub functionality Issues with service, such as dropped calls, call quality issues, or service outages	North America: 1-800-553-2447 EMEA: +32 2 704 5555 APAC: +61 2 8446 7411 Email: tac@cisco.com See also: Help with TAC Open a support case
Invoice & Collections	VAT, Payment and other invoicing queries	Contact the Collector on the Invoice via email or phone
Cisco SaaS Support Team (CES)	Quoting Order Booking & Management Provisioning Subscription Management Billing & Invoicing Disputes	Refer Partner Support Playbook and Cisco Calling Plans FAQ Create a case through link below if the required information is not found in the playbook - https://customerservice.cloudapps.cisco.com/

Cisco Calling Plans requirements and limitations

Requirements

Partners must be an authorized Webex Calling partner and have accepted the new Webex Calling addendum through enrollment into the Webex Calling PSTN program.
A minimum of one committed Outbound Calling Plan license must be purchased to enable access to all services associated with Cisco Calling Plans.

Limitations

Cisco Calling Plans are currently available to specified countries.
Existing Webex Calling locations or telephone numbers can only transition to Cisco Calling Plans in certain scenarios. For details on supported migration paths, refer Supported paths for PSTN migration section.
You can order a maximum of 100 new standard phone numbers at a time. Additional numbers can be placed as a separate order.
Toll-free numbers aren’t currently available. You can’t order new toll-free numbers or port existing toll-free numbers to the Cisco Calling Plans.
Cisco Calling Plans aren’t supported with Webex Contact Center or authorized for use in which high-concurrent calls or high-volume calls or uncommonly short or long calls are made. For more information about Webex Contact Center, see Get started with Webex Contact Center.
Some premium services and international destinations may not be available for operational purposes. If specific destinations which are not generally available are required, customers can open a support case to request availability.

Select your PSTN provider

The card view displays the PSTN provider available for the Webex Calling customer before configuring the PSTN location. The PSTN view displays both Providers and Orders.

The provider screen displays the various provider cards with the list of supported service types. The Providers section is classified into the following:

Preferred Calling providers
Certified Calling providers
Calling providers

The providers include the following:

Provider summary
List of locations configured with this provider
List of markets that the provider is available for the supported services.

If the customer has PSTN locations where Calling services aren’t set up, the Select this provider action bar displays. Use this option to configure the service for the PSTN location.

Select the location from the drop-down menu.
Choose the subscription type for the users to use the Cisco Calling plans. Click Next.
Complete the fields for Contract Information and Emergency Service Address configuration.

The PSTN service set up is now complete.

Cisco Calling Plans trials

Each trial account can provision up to 10 standard telephone numbers from Cisco Calling Plans with Webex Calling. It isn’t permitted to provision more than 10 numbers per trial.
Only new, standard telephone numbers are supported in trials. Ported numbers, consecutive blocks, and inbound toll-free numbers aren’t supported on trial accounts. You also cannot port numbers out of a trial. You must convert to a paid account if you wish to use these features.
International calling, along with Premium Service Call types I & II are blocked from use during the trial period.
Business Texting isn’t available on Webex Calling trial accounts.
Trial accounts are intended for technical evaluation purposes only, and not for normal commercial operation. As such, emergency services are only meant for technical evaluation; actual emergency calls can’t be guaranteed. Users shouldn’t place actual emergency service calls on a trial account.

Set up your Cisco Calling Plan

Once your Cisco Calling Plan service is enabled, you can select one of the PSTN options:

Cisco Calling Plans (Cisco PSTN)
Cloud Connected PSTN
Premise-based PSTN (Local Gateway must be enabled separately. For more information, see Configure Premises-based PSTN in Control Hub.)

1	From the customer view in https://admin.webex.com, go to Management > Locations and select the location you want to update.
2	Select the Calling tab and Click Manage next to PTSN Connection.
3	Select Cisco Calling Plans and click Next.
4	Enter the contact information and click Next. This field is for the contact information of the person who will sign the legal contract with Cisco.
5	Enter the Emergency Services Address (ESA), and click Save. By default, the ESA entered here is applied to all phone numbers for this location. You can change the ESA for an individual user if needed. For example, you may need to change the ESA if you have a remote employee who works from home.
6	On the summary screen, do one of the following: Add numbers. Click Done. You can add numbers to your calling plan later.

Order new phone numbers

Before you begin

Enable the Cisco Calling Plan for your site before you order new phone numbers through Control Hub.
By default, the Emergency Service Address (ESA) entered for a location during your Cisco Calling Plan setup is applied to all phone numbers for that location.
Provide the following information for business identity verification:
- First name and last name of the legal representative
- Contact phone number
- Company name
- Local company registration certificate
Provide the following information for address verification:
- Address matching the DID area code (street, building number, postal code, city, and country)
- Proof of address, not older than last three months

Additionally, you must submit a copy of your passport or ID card in the Netherlands, Switzerland, Poland, Greece, and Lithuania. You must provide VAT ID in Sweden and Greece.

1	From the customer view in https://admin.webex.com, go to Calling and then click Numbers > Add Numbers.
2	Choose a location and click Select under Order new numbers. Click Next. You’re directed to Contact Support to order a new numbers.
3	Click Contact Support. Your location information is automatically populated on the Case Details window.
4	Indicate how many new numbers you’re requesting in the Number of Telephone Numbers Requested field.
5	From the Number Type drop-down list, choose Local or National as the case maybe.
6	(Optional) Enter the additional details.
7	Click Submit. You receive a PSTN Order Number which displays on the PSTN order page. It can take up to five to seven business days for the ordering and document approval process.

Port phone numbers

Before you begin

We strongly recommend you to read and familiarize yourself with the Cisco Calling Plan Number Porting Guidelines and Policies before you start porting the numbers.

Enable Cisco Calling Plan for your location before you port phone numbers through Control Hub.
A signed Letter of Agency (LOA) is needed, authorizing Cisco to place orders with the current PSTN carrier to move the service to Cisco. The LOA must be signed by the current account owner or authorized signer. You're prompted to sign the LOA while completing the porting steps.
Make sure you have a recent bill in PNG or PDF format from your current PSTN provider. The bill must not be older than 30 days. While completing the porting steps, you’re prompted to upload a copy of your bill.
For successful porting, ensure that you have the following information ready:
- List of all phone numbers to port (non-toll free)
- Current PSTN provider account information
- Customer Service Record (CSR) if available
- Your account PIN if one exists
- VAT number or Tax ID
When planning for which numbers to port, we recommend that you consider any number that receives inbound calls. See Cisco Calling Plan Number Policy for more information.
By default, the Emergency Service Address (ESA) entered for a location during your Cisco Calling Plan setup is applied to all phone numbers for that location.

As an administrator, you can move existing phone numbers from your current PSTN to the Cisco Calling Plan option. The following are the types of porting services:

Standard port: When a phone number moves from one service provider to another, without any special circumstances. For example, porting a number from Carrier A to Carrier B within the same country and service area is a Standard port.
Mixed operator port: A more complex porting situation that involves multiple operators or service providers. For example, porting a range of numbers in a block that belongs to two or more network operators is a Mixed operator port.

Porting of numbers is done in a fixed time slot in the following countries:

Porting time slot	Countries
Monday to Friday between 8 a.m. to 3 p.m.	Switzerland, Belgium, Sweden
Monday to Friday between 9 a.m. to 4 p.m.	Netherlands, Lithuania, Luxembourg, Denmark
Monday to Friday between 8 a.m. to 5 p.m.	Finland

Requests for porting out of hours are on a case-by-case basis and depend on the carriers involved. We can’t guarantee that out of hours porting is available.

1	From the customer view in https://admin.webex.com, go to Calling and click Numbers > Add Numbers.
2	Choose a location and click Select under Port numbers over. Click Next.
3	Add the phone numbers that you want to port, and then click Save & continue.
4	Enter the Date and Time by when you want the porting to finish. The schedule is set based on your preference. But it’s not guaranteed that the porting of your numbers is finished at the exact date and time selected.
5	(Optional) Enter an additional email address, other than the default contact listed, to receive notifications regarding the port order status.
6	Click Next.
7	Enter your current carrier account information in the fields provided. Make sure this matches the information on your previous carrier’s bill.
8	Click Next.
9	Upload your previous carrier bill (not older than 30 days).
10	Click Next.
11	Upload the LOA. The authorized contact for your previous carrier’s account needs to upload the signed LOA. Open a ticket with Webex Partner Help Center to get the LOA required for your country and upload the signed copy here. If you're not the authorized contact, skip this step for now. That person can come back and upload the signed LOA later, we’ll send your order contacts a reminder.
12	Click Save & continue.
13	Your Port Order is submitted. You can check the order status in PSTN Orders.
14	Click Done. Our support team contacts you for any additional documents requirements to complete your porting request. You can upload the requested documents in the right-hand panel of the order. The Firm Order Commitment (FOC) date can be two business days later from the submission date. An FOC is the date on which the losing carrier states that it releases a phone number to the winning carrier. After the losing carrier confirms the porting request, you can cancel or postpone the porting request as per the following rules: These timeframes are estimates and aren’t bound by any SLA. You can cancel or reschedule a standard porting operation to five working days before the porting date. You can cancel or reschedule a mixed operator porting operation to seven working days before the porting date. If porting takes place and you need to roll back the numbers to the previous carrier, raise such requests with the PTS team at the earliest. Rollbacks aren’t always possible and may require placing a port back request with the previous carrier.

Manage PSTN

When placing orders for new numbers or porting existing numbers, you can check the order status or port rejection notices in Control Hub.

A migration banner is displayed when there are locations which need to be migrated from Non-Integrated CCP to Integrated CCP.

From the customer view in https://admin.webex.com, go to Calling and click PSTN.

Every order submitted has a status value.
Select an order to check its status.

Status Values for New Number Orders

Displayed Status	Description

Pending	A New numbers order has been created by the user.
Provisioned	New numbers are provisioned.
Error	An issue is detected with the new numbers order. Create a TAC ticket to get help.
Action Required	Click to contact PTS for assistance.

Status Values for Ported Number Orders

Displayed Status	Description

Pending	User is in the process of creating/filling in details of the Porting Order. Once submitted, the order will still show Pending until Cisco validates and accepts the porting order.
Rejected	Porting issue is detected. See the Porting Errors table for additional details. If required, go to Control Hub and click on the PSTN Help link for PSTN technical support.
Submitted	Porting Order is validated and accepted.
FOC Received	FOC date confirmation from the previous PSTN provider received.
Completed	Porting process is complete.
Canceled	Order is canceled.

Porting Error Messages

Displayed Error	Description	How to fix

Account number mismatch	Account number doesn’t match the number on the Customer Service Record (CSR)	Update the Account Number field on the PSTN Order and resubmit. For some carriers, the account number may be the same as the BTN or the telephone number itself.
Account number required	The account number wasn't provided but is required.	Update the Account Number field on the PSTN Order and resubmit. For some carriers, the account number may be the same as the BTN or the telephone number itself.
Account name mismatch	The person authorizing doesn't match the name on the (CSR).	Update the Authorized name on account field on the PSTN order and resubmit.
BTN mismatch	BTN or ATN doesn’t match that on the CSR.	Update the Carrier billing phone number field on the PSTN Order and resubmit.
Company name mismatch	Entity name does not match that on the CSR.	Update the Company name with previous carrier field on the PSTN order and resubmit.
Multiple BTNs	The OSP requires this Porting Order to be split and submitted as separate orders.	Cancel the current PSTN order and create a new, multiple PSTN Orders. Create one for each group of numbers that have the same BTN.
FOC rejected by losing carrier	The FOC date requested can’t be accommodated by the OSP.	Update the Port Complete date field on the PSTN order and resubmit.
Unknown	Go to Control Hub and click on the PSTN Help link for PSTN technical support.	Go to Control Hub and click on the PSTN Help link for PSTN technical support.
Invalid PIN	Passcode/PIN must be provided for wireless port.	Update the PIN field on the PSTN order and resubmit.
Pending order	The OSP has a pending LSR on the account (for example, a port out or address change).	Remove the telephone numbers in question from the PSTN order and resubmit.
Pending main BTN	BTN is one of the phone numbers being ported. User must indicate Porting Order Type, Remaining Numbers Action, and New Billing Phone Number accordingly.	Remove the main BTN from the list of telephone numbers being ported and resubmit the order. Include the Main BTN into the last iteration of numbers (if porting numbers in multiple iterations).
Service address mismatch	The location info doesn't match that on the CSR.	Update the Service address, State, and City fields and resubmit the order.
TN has special feature	Some of the phone numbers can't be ported because they have a special feature (for example, remote call forward).	Remove numbers with special features from the PSTN order and resubmit. Or, unassign a special features from the numbers being ported.
TN mismatch	Some of the phone numbers don't belong to the end user.	Remove one or more numbers in question and resubmit the order.
TN not portable	Some of the phone numbers can't be ported because they're inactive or aren't part of the end user's account.	Try to remove one or more numbers in question and resubmit the PSTN order.
Unsupported rate center	The rate center isn't portable.	Remove one or more numbers in question and resubmit the order.
Zip/postal code mismatch	Postal code doesn't match the one on the CSR.	Update the Zip code field and resubmit the order.
Previous carrier's bill is invalid	The invoice is invalid.	Go to PSTN Order details, then open Previous Carrier’s Bill section. Upload the correct bill file and resubmit the order.
LOA invalid	The LOA is invalid.	Sign the LOA and resubmit the PSTN order. Alternatively, go to Control Hub and click on the PSTN Help link for PSTN technical support.

PSTN – Public Switched Telephone Network

CSR – Customer Service Record

FOC – Firm Order Commitment

OSP – Old Service Provider

BTN – Billing Telephone Number

ATN – Account Telephone Number

Change the emergency service address for a user

1	From the customer view in https://admin.webex.com, go to Users.
2	Select the user you want to modify and click Calling.
3	Select the primary phone number under Directory Numbers.
4	Under Emergency Service Address, select Custom Address.
5	Update the information for the user and click Save.

Change the emergency service address for a location

Once a location is set up with the Cisco Calling Plan, you can update the Emergency Service Address.

1	From the customer view in https://admin.webex.com, go to Management > Locations and select the location you want to update.
2	Next to PSTN Connection, click Manage.
3	Next to the Emergency Service Address, click Edit.
4	Enter the new addres and click Save.

Supported paths for PSTN migration

Use this matrix to know the potential PSTN migration paths for Webex Calling.

Webex Calling supports the following PSTN migration paths:

Using Self Service through Control Hub
- Premises-based PSTN, non-integrated CCPP, and non-integrated IntelePeer to Cisco Calling Plans. See Migrate to Cisco Calling plans.
- Non-integrated CCP to Integrated CCP. See, Migrating from Non-Integrated CCP to Integrated CCP (webex.com)
- Non-integrated CCP Provider including non-integrated Intelepeer to a Premises-based Solution. See, Configure premises-based PSTN in Control Hub
Using Manual Migration
- Premises-based solution to Integrated CCP Provider
- Integrated CCP Provider to Non-integrated CCP Provider (Exception: Non-integrated Intelepeer isn’t supported as the target CCP Provider)
- Integrated CCP Provider to Premises-based Solution

Here’s a list of unsupported PSTN migration paths:

Cisco Calling Plans to integrated Intelepeer
Integrated Intelepeer to Cisco Calling Plans

Your Cisco Calling Plan bill

When your billing begins:

Outbound Calling Plans ordered in CCW begin billing on the requested service date (RSD).
Outbound Calling Plans provisioned in Control Hub begin billing immediately.
Phone numbers provisioned in Control Hub begin billing immediately or, if ported from another provider, will begin billing upon port completion.

Outbound calling plan rates:

Rates for the Outbound Calling Plans and phone numbers are pro-rated using the same proration methord used to calculate the rates for the Webex Calling licenses.
International calling rates vary by country and are billed the month following usage.

Find support for Cisco Calling Plans

Cisco Calling Plans support is provided by various support divisions, depending on your need.

Table 19. Cisco Support Contact Information
Support Division	Purpose	Contact Information
Partner Help Desk (PHD)	Partner how-to and/or documentation inquiries, Pre-quoting Regulatory Tax and other enquiries about the Cisco Calling Plans offering.	North America: 1-844-613-6108 EMEA: +44 129 366 10 20 APAC: +61 3 7017 7272 Email: webexcalling-phd@cisco.com
PSTN Technical Support (PTS)	Partner/Customer PSTN-related questions Port order expedite requests Port date reschedules Port rejections Specific date/time requests for a port Port date changes post FOC (Firm Order Commitment) Order cancellations	Go to Control Hub and click on PSTN Help link for PSTN technical support.
TAC	Issues with Control Hub functionality Issues with service, such as dropped calls, call quality issues, or service outages	North America: 1-800-553-2447 EMEA: +32 2 704 5555 APAC: +61 2 8446 7411 Email: tac@cisco.com See also: Help with TAC Open a support case
Invoice & Collections	VAT, Payment and other invoicing queries	Contact the Collector on the Invoice via email or phone
Cisco SaaS Support Team (CES)	Quoting Order Booking & Management Provisioning Subscription Management Billing & Invoicing Disputes	Refer Partner Support Playbook and Cisco Calling Plans FAQ Create a case through link below if the required information is not found in the playbook - https://customerservice.cloudapps.cisco.com/

Cisco Calling Plans requirements and limitations

Requirements

Partners must be an authorized Webex Calling partner and have accepted the new Webex Calling addendum through enrollment into the Webex Calling PSTN program.
A minimum of one committed Outbound Calling Plan license must be purchased to enable access to all services associated with Cisco Calling Plans.

Limitations

Cisco Calling Plans are currently available to specified countries.
Existing Webex Calling locations or telephone numbers can only transition to Cisco Calling Plans in certain scenarios. For details on supported migration paths, refer Supported paths for PSTN migration section.
You can order a maximum of 100 new standard phone numbers at a time. Additional numbers can be placed as a separate order.
Toll-free numbers aren’t currently available. You can’t order new toll-free numbers or port existing toll-free numbers to the Cisco Calling Plans.
Cisco Calling Plans aren’t supported with Webex Contact Center or authorized for use in which high-concurrent calls or high-volume calls or uncommonly short or long calls are made. For more information about Webex Contact Center, see Get started with Webex Contact Center.
Some premium services and international destinations may not be available for operational purposes. If specific destinations which are not generally available are required, customers can open a support case to request availability.

Select your PSTN provider

The card view displays the PSTN provider available for the Webex Calling customer before configuring the PSTN location. The PSTN view displays both Providers and Orders.

The provider screen displays the various provider cards with the list of supported service types. The Providers section is classified into the following:

Preferred Calling providers
Certified Calling providers
Calling providers

The providers include the following:

Provider summary
List of locations configured with this provider
List of markets that the provider is available for the supported services.

If the customer has PSTN locations where Calling services aren’t set up, the Select this provider action bar displays. Use this option to configure the service for the PSTN location.

Select the location from the drop-down menu.
Choose the subscription type for the users to use the Cisco Calling plans. Click Next.
Complete the fields for Contract Information and Emergency Service Address configuration.

The PSTN service set up is now complete.

Cisco Calling Plans trials

Each trial account can provision up to 10 standard telephone numbers from Cisco Calling Plans with Webex Calling. It isn’t permitted to provision more than 10 numbers per trial.
Only new, standard telephone numbers are supported in trials. Ported numbers, consecutive blocks, and inbound toll-free numbers aren’t supported on trial accounts. You also cannot port numbers out of a trial. You must convert to a paid account if you wish to use these features.
International calling, along with Premium Service Call types I & II are blocked from use during the trial period.
Business Texting isn’t available on Webex Calling trial accounts.
Trial accounts are intended for technical evaluation purposes only, and not for normal commercial operation. As such, emergency services are only meant for technical evaluation; actual emergency calls can’t be guaranteed. Users shouldn’t place actual emergency service calls on a trial account.

Set up your Cisco Calling Plan

Once your Cisco Calling Plan service is enabled, you can select one of the PSTN options:

Cisco Calling Plans (Cisco PSTN)
Cloud Connected PSTN
Premise-based PSTN (Local Gateway must be enabled separately. For more information, see Configure Premises-based PSTN in Control Hub.)

1	From the customer view in https://admin.webex.com, go to Management > Locations and select the location you want to update.
2	Select the Calling tab and Click Manage next to PTSN Connection.
3	Select Cisco Calling Plans and click Next.
4	Enter the contact information and click Next. This field is for the contact information of the person who will sign the legal contract with Cisco.
5	Enter the Emergency Services Address (ESA), and click Save. By default, the ESA entered here is applied to all phone numbers for this location. You can change the ESA for an individual user if needed. For example, you may need to change the ESA if you have a remote employee who works from home.
6	On the summary screen, do one of the following: Add numbers. Click Done. You can add numbers to your calling plan later.

Order new phone numbers

Before you begin

Enable the Cisco Calling Plan for your site before you order new phone numbers through Control Hub.
By default, the Emergency Service Address (ESA) entered for a location during your Cisco Calling Plan setup is applied to all phone numbers for that location.
Provide the following information for business identity verification:
- First name and last name of the legal representative
- Contact phone number
- Company name
- Local company registration certificate
Provide the following information for address verification:
- Address matching the DID area code (street, building number, postal code, city, and country)
- Proof of address, not older than last three months

Additionally, you must submit a copy of your passport or ID card in the Netherlands, Switzerland, Poland, Greece, and Lithuania. You must provide VAT ID in Sweden and Greece.

1	From the customer view in https://admin.webex.com, go to Calling and then click Numbers > Add Numbers.
2	Choose a location and click Select under Order new numbers. Click Next. You’re directed to Contact Support to order a new numbers.
3	Click Contact Support. Your location information is automatically populated on the Case Details window.
4	Indicate how many new numbers you’re requesting in the Number of Telephone Numbers Requested field.
5	From the Number Type drop-down list, choose Local or National as the case maybe.
6	(Optional) Enter the additional details.
7	Click Submit. You receive a PSTN Order Number which displays on the PSTN order page. It can take up to five to seven business days for the ordering and document approval process.

Port phone numbers

Before you begin

We strongly recommend you to read and familiarize yourself with the Cisco Calling Plan Number Porting Guidelines and Policies before you start porting the numbers.

Enable Cisco Calling Plan for your location before you port phone numbers through Control Hub.
A signed Letter of Agency (LOA) is needed, authorizing Cisco to place orders with the current PSTN carrier to move the service to Cisco. The LOA must be signed by the current account owner or authorized signer. You're prompted to sign the LOA while completing the porting steps.
Make sure you have a recent bill in PNG or PDF format from your current PSTN provider. The bill must not be older than 30 days. While completing the porting steps, you’re prompted to upload a copy of your bill.
For successful porting, ensure that you have the following information ready:
- List of all phone numbers to port (non-toll free)
- Current PSTN provider account information
- Customer Service Record (CSR) if available
- Your account PIN if one exists
- VAT number or Tax ID
When planning for which numbers to port, we recommend that you consider any number that receives inbound calls. See Cisco Calling Plan Number Policy for more information.
By default, the Emergency Service Address (ESA) entered for a location during your Cisco Calling Plan setup is applied to all phone numbers for that location.

As an administrator, you can move existing phone numbers from your current PSTN to the Cisco Calling Plan option. The following are the types of porting services:

Standard port: When a phone number moves from one service provider to another, without any special circumstances. For example, porting a number from Carrier A to Carrier B within the same country and service area is a Standard port.
Mixed operator port: A more complex porting situation that involves multiple operators or service providers. For example, porting a range of numbers in a block that belongs to two or more network operators is a Mixed operator port.

Porting of numbers is done in a fixed time slot in the following countries:

Porting time slot	Countries
Monday to Friday between 8 a.m. to 3 p.m.	Switzerland, Belgium, Sweden
Monday to Friday between 9 a.m. to 4 p.m.	Netherlands, Lithuania, Luxembourg, Denmark
Monday to Friday between 8 a.m. to 5 p.m.	Finland

Requests for porting out of hours are on a case-by-case basis and depend on the carriers involved. We can’t guarantee that out of hours porting is available.

1	From the customer view in https://admin.webex.com, go to Calling and click Numbers > Add Numbers.
2	Choose a location and click Select under Port numbers over. Click Next.
3	Add the phone numbers that you want to port, and then click Save & continue.
4	Enter the Date and Time by when you want the porting to finish. The schedule is set based on your preference. But it’s not guaranteed that the porting of your numbers is finished at the exact date and time selected.
5	(Optional) Enter an additional email address, other than the default contact listed, to receive notifications regarding the port order status.
6	Click Next.
7	Enter your current carrier account information in the fields provided. Make sure this matches the information on your previous carrier’s bill.
8	Click Next.
9	Upload your previous carrier bill (not older than 30 days).
10	Click Next.
11	Upload the LOA. The authorized contact for your previous carrier’s account needs to upload the signed LOA. Open a ticket with Webex Partner Help Center to get the LOA required for your country and upload the signed copy here. If you're not the authorized contact, skip this step for now. That person can come back and upload the signed LOA later, we’ll send your order contacts a reminder.
12	Click Save & continue.
13	Your Port Order is submitted. You can check the order status in PSTN Orders.
14	Click Done. Our support team contacts you for any additional documents requirements to complete your porting request. You can upload the requested documents in the right-hand panel of the order. The Firm Order Commitment (FOC) date can be two business days later from the submission date. An FOC is the date on which the losing carrier states that it releases a phone number to the winning carrier. After the losing carrier confirms the porting request, you can cancel or postpone the porting request as per the following rules: These timeframes are estimates and aren’t bound by any SLA. You can cancel or reschedule a standard porting operation to five working days before the porting date. You can cancel or reschedule a mixed operator porting operation to seven working days before the porting date. If porting takes place and you need to roll back the numbers to the previous carrier, raise such requests with the PTS team at the earliest. Rollbacks aren’t always possible and may require placing a port back request with the previous carrier.

Manage PSTN

When placing orders for new numbers or porting existing numbers, you can check the order status or port rejection notices in Control Hub.

A migration banner is displayed when there are locations which need to be migrated from Non-Integrated CCP to Integrated CCP.

From the customer view in https://admin.webex.com, go to Calling and click PSTN.

Every order submitted has a status value.
Select an order to check its status.

Status Values for New Number Orders

Displayed Status	Description

Pending	A New numbers order has been created by the user.
Provisioned	New numbers are provisioned.
Error	An issue is detected with the new numbers order. Create a TAC ticket to get help.
Action Required	Click to contact PTS for assistance.

Status Values for Ported Number Orders

Displayed Status	Description

Pending	User is in the process of creating/filling in details of the Porting Order. Once submitted, the order will still show Pending until Cisco validates and accepts the porting order.
Rejected	Porting issue is detected. See the Porting Errors table for additional details. If required, go to Control Hub and click on the PSTN Help link for PSTN technical support.
Submitted	Porting Order is validated and accepted.
FOC Received	FOC date confirmation from the previous PSTN provider received.
Completed	Porting process is complete.
Canceled	Order is canceled.

Porting Error Messages

Displayed Error	Description	How to fix

Account number mismatch	Account number doesn’t match the number on the Customer Service Record (CSR)	Update the Account Number field on the PSTN Order and resubmit. For some carriers, the account number may be the same as the BTN or the telephone number itself.
Account number required	The account number wasn't provided but is required.	Update the Account Number field on the PSTN Order and resubmit. For some carriers, the account number may be the same as the BTN or the telephone number itself.
Account name mismatch	The person authorizing doesn't match the name on the (CSR).	Update the Authorized name on account field on the PSTN order and resubmit.
BTN mismatch	BTN or ATN doesn’t match that on the CSR.	Update the Carrier billing phone number field on the PSTN Order and resubmit.
Company name mismatch	Entity name does not match that on the CSR.	Update the Company name with previous carrier field on the PSTN order and resubmit.
Multiple BTNs	The OSP requires this Porting Order to be split and submitted as separate orders.	Cancel the current PSTN order and create a new, multiple PSTN Orders. Create one for each group of numbers that have the same BTN.
FOC rejected by losing carrier	The FOC date requested can’t be accommodated by the OSP.	Update the Port Complete date field on the PSTN order and resubmit.
Unknown	Go to Control Hub and click on the PSTN Help link for PSTN technical support.	Go to Control Hub and click on the PSTN Help link for PSTN technical support.
Invalid PIN	Passcode/PIN must be provided for wireless port.	Update the PIN field on the PSTN order and resubmit.
Pending order	The OSP has a pending LSR on the account (for example, a port out or address change).	Remove the telephone numbers in question from the PSTN order and resubmit.
Pending main BTN	BTN is one of the phone numbers being ported. User must indicate Porting Order Type, Remaining Numbers Action, and New Billing Phone Number accordingly.	Remove the main BTN from the list of telephone numbers being ported and resubmit the order. Include the Main BTN into the last iteration of numbers (if porting numbers in multiple iterations).
Service address mismatch	The location info doesn't match that on the CSR.	Update the Service address, State, and City fields and resubmit the order.
TN has special feature	Some of the phone numbers can't be ported because they have a special feature (for example, remote call forward).	Remove numbers with special features from the PSTN order and resubmit. Or, unassign a special features from the numbers being ported.
TN mismatch	Some of the phone numbers don't belong to the end user.	Remove one or more numbers in question and resubmit the order.
TN not portable	Some of the phone numbers can't be ported because they're inactive or aren't part of the end user's account.	Try to remove one or more numbers in question and resubmit the PSTN order.
Unsupported rate center	The rate center isn't portable.	Remove one or more numbers in question and resubmit the order.
Zip/postal code mismatch	Postal code doesn't match the one on the CSR.	Update the Zip code field and resubmit the order.
Previous carrier's bill is invalid	The invoice is invalid.	Go to PSTN Order details, then open Previous Carrier’s Bill section. Upload the correct bill file and resubmit the order.
LOA invalid	The LOA is invalid.	Sign the LOA and resubmit the PSTN order. Alternatively, go to Control Hub and click on the PSTN Help link for PSTN technical support.

PSTN – Public Switched Telephone Network

CSR – Customer Service Record

FOC – Firm Order Commitment

OSP – Old Service Provider

BTN – Billing Telephone Number

ATN – Account Telephone Number

Change the emergency service address for a user

1	From the customer view in https://admin.webex.com, go to Users.
2	Select the user you want to modify and click Calling.
3	Select the primary phone number under Directory Numbers.
4	Under Emergency Service Address, select Custom Address.
5	Update the information for the user and click Save.

Change the emergency service address for a location

Once a location is set up with the Cisco Calling Plan, you can update the Emergency Service Address.

1	From the customer view in https://admin.webex.com, go to Management > Locations and select the location you want to update.
2	Next to PSTN Connection, click Manage.
3	Next to the Emergency Service Address, click Edit.
4	Enter the new addres and click Save.

Supported paths for PSTN migration

Use this matrix to know the potential PSTN migration paths for Webex Calling.

Webex Calling supports the following PSTN migration paths:

Using Self Service through Control Hub
- Premises-based PSTN, non-integrated CCPP, and non-integrated IntelePeer to Cisco Calling Plans. See Migrate to Cisco Calling plans.
- Non-integrated CCP to Integrated CCP. See, Migrating from Non-Integrated CCP to Integrated CCP (webex.com)
- Non-integrated CCP Provider including non-integrated Intelepeer to a Premises-based Solution. See, Configure premises-based PSTN in Control Hub
Using Manual Migration
- Premises-based solution to Integrated CCP Provider
- Integrated CCP Provider to Non-integrated CCP Provider (Exception: Non-integrated Intelepeer isn’t supported as the target CCP Provider)
- Integrated CCP Provider to Premises-based Solution

Here’s a list of unsupported PSTN migration paths:

Cisco Calling Plans to integrated Intelepeer
Integrated Intelepeer to Cisco Calling Plans

Your Cisco Calling Plan bill

When your billing begins:

Outbound Calling Plans ordered in CCW begin billing on the requested service date (RSD).
Outbound Calling Plans provisioned in Control Hub begin billing immediately.
Phone numbers provisioned in Control Hub begin billing immediately or, if ported from another provider, will begin billing upon port completion.

Outbound calling plan rates:

Rates for the Outbound Calling Plans and phone numbers are pro-rated using the same proration methord used to calculate the rates for the Webex Calling licenses.
International calling rates vary by country and are billed the month following usage.

Find support for Cisco Calling Plans

Cisco Calling Plans support is provided by various support divisions, depending on your need.

Table 21. Cisco Support Contact Information
Support Division	Purpose	Contact Information
Partner Help Desk (PHD)	Partner how-to and/or documentation inquiries, Pre-quoting Regulatory Tax and other enquiries about the Cisco Calling Plans offering.	North America: 1-844-613-6108 EMEA: +44 129 366 10 20 APAC: +61 3 7017 7272 Email: webexcalling-phd@cisco.com
PSTN Technical Support (PTS)	Partner/Customer PSTN-related questions Port order expedite requests Port date reschedules Port rejections Specific date/time requests for a port Port date changes post FOC (Firm Order Commitment) Order cancellations	Go to Control Hub and click on PSTN Help link for PSTN technical support.
TAC	Issues with Control Hub functionality Issues with service, such as dropped calls, call quality issues, or service outages	North America: 1-800-553-2447 EMEA: +32 2 704 5555 APAC: +61 2 8446 7411 Email: tac@cisco.com See also: Help with TAC Open a support case
Invoice & Collections	VAT, Payment and other invoicing queries	Contact the Collector on the Invoice via email or phone
Cisco SaaS Support Team (CES)	Quoting Order Booking & Management Provisioning Subscription Management Billing & Invoicing Disputes	Refer Partner Support Playbook and Cisco Calling Plans FAQ Create a case through link below if the required information is not found in the playbook - https://customerservice.cloudapps.cisco.com/

Cisco Calling Plans requirements and limitations

Requirements

Partners must be an authorized Webex Calling partner and have accepted the new Webex Calling addendum through enrollment into the Webex Calling PSTN program.
A minimum of one committed Outbound Calling Plan license must be purchased to enable access to all services associated with Cisco Calling Plans.

Limitations

Cisco Calling Plans are currently available to specified countries.
Existing Webex Calling locations or telephone numbers can only transition to Cisco Calling Plans in certain scenarios. For details on supported migration paths, refer Supported paths for PSTN migration section.
You can order a maximum of 100 new standard phone numbers at a time. Additional numbers can be placed as a separate order.
Toll-free numbers aren’t currently available. You can’t order new toll-free numbers or port existing toll-free numbers to the Cisco Calling Plans.
Cisco Calling Plans aren’t supported with Webex Contact Center or authorized for use in which high-concurrent calls or high-volume calls or uncommonly short or long calls are made. For more information about Webex Contact Center, see Get started with Webex Contact Center.
Some premium services and international destinations may not be available for operational purposes. If specific destinations which are not generally available are required, customers can open a support case to request availability.

Select your PSTN provider

The card view displays the PSTN provider available for the Webex Calling customer before configuring the PSTN location. The PSTN view displays both Providers and Orders.

The provider screen displays the various provider cards with the list of supported service types. The Providers section is classified into the following:

Preferred Calling providers
Certified Calling providers
Calling providers

The providers include the following:

Provider summary
List of locations configured with this provider
List of markets that the provider is available for the supported services.

If the customer has PSTN locations where Calling services aren’t set up, the Select this provider action bar displays. Use this option to configure the service for the PSTN location.

Select the location from the drop-down menu.
Choose the subscription type for the users to use the Cisco Calling plans. Click Next.
Complete the fields for Contract Information and Emergency Service Address configuration.

The PSTN service set up is now complete.

Cisco Calling Plans trials

Each trial account can provision up to 10 standard telephone numbers from Cisco Calling Plans with Webex Calling. It isn’t permitted to provision more than 10 numbers per trial.
Only new, standard telephone numbers are supported in trials. Ported numbers, consecutive blocks, and inbound toll-free numbers aren’t supported on trial accounts. You also cannot port numbers out of a trial. You must convert to a paid account if you wish to use these features.
International calling, along with Premium Service Call types I & II are blocked from use during the trial period.
Business Texting isn’t available on Webex Calling trial accounts.
Trial accounts are intended for technical evaluation purposes only, and not for normal commercial operation. As such, emergency services are only meant for technical evaluation; actual emergency calls can’t be guaranteed. Users shouldn’t place actual emergency service calls on a trial account.

Set up your Cisco Calling Plan

Once your Cisco Calling Plan service is enabled, you can select one of the PSTN options:

Cisco Calling Plans (Cisco PSTN)
Cloud Connected PSTN
Premise-based PSTN (Local Gateway must be enabled separately. For more information, see Configure Premises-based PSTN in Control Hub.)

1	From the customer view in https://admin.webex.com, go to Management > Locations and select the location you want to update.
2	Select the Calling tab and Click Manage next to PTSN Connection.
3	Select Cisco Calling Plans and click Next.
4	Enter the contact information and click Next. This field is for the contact information of the person who will sign the legal contract with Cisco.
5	Enter the Emergency Services Address (ESA), and click Save. By default, the ESA entered here is applied to all phone numbers for this location. You can change the ESA for an individual user if needed. For example, you may need to change the ESA if you have a remote employee who works from home.
6	On the summary screen, do one of the following: Add numbers. Click Done. You can add numbers to your calling plan later.

Order new phone numbers

Before you begin

Enable the Cisco Calling Plan for your site before you order new phone numbers through Control Hub.
By default, the Emergency Service Address (ESA) entered for a location during your Cisco Calling Plan setup is applied to all phone numbers for that location.
Provide the following information for business identity verification:
- First name and last name of the legal representative
- Contact phone number
- Company name
- Local company registration certificate
Provide the following information for address verification:
- Address matching the DID area code (street, building number, postal code, city, and country)
- Proof of address, not older than last three months

Additionally, you must submit a copy of your passport or ID card in the Netherlands, Switzerland, Poland, Greece, and Lithuania. You must provide VAT ID in Sweden and Greece.

1	From the customer view in https://admin.webex.com, go to Calling and then click Numbers > Add Numbers.
2	Choose a location and click Select under Order new numbers. Click Next. You’re directed to Contact Support to order a new numbers.
3	Click Contact Support. Your location information is automatically populated on the Case Details window.
4	Indicate how many new numbers you’re requesting in the Number of Telephone Numbers Requested field.
5	From the Number Type drop-down list, choose Local or National as the case maybe.
6	(Optional) Enter the additional details.
7	Click Submit. You receive a PSTN Order Number which displays on the PSTN order page. It can take up to five to seven business days for the ordering and document approval process.

Port phone numbers

Before you begin

We strongly recommend you to read and familiarize yourself with the Cisco Calling Plan Number Porting Guidelines and Policies before you start porting the numbers.

Enable Cisco Calling Plan for your location before you port phone numbers through Control Hub.
A signed Letter of Agency (LOA) is needed, authorizing Cisco to place orders with the current PSTN carrier to move the service to Cisco. The LOA must be signed by the current account owner or authorized signer. You're prompted to sign the LOA while completing the porting steps.
Make sure you have a recent bill in PNG or PDF format from your current PSTN provider. The bill must not be older than 30 days. While completing the porting steps, you’re prompted to upload a copy of your bill.
For successful porting, ensure that you have the following information ready:
- List of all phone numbers to port (non-toll free)
- Current PSTN provider account information
- Customer Service Record (CSR) if available
- Your account PIN if one exists
- VAT number or Tax ID
When planning for which numbers to port, we recommend that you consider any number that receives inbound calls. See Cisco Calling Plan Number Policy for more information.
By default, the Emergency Service Address (ESA) entered for a location during your Cisco Calling Plan setup is applied to all phone numbers for that location.

As an administrator, you can move existing phone numbers from your current PSTN to the Cisco Calling Plan option. The following are the types of porting services:

Standard port: When a phone number moves from one service provider to another, without any special circumstances. For example, porting a number from Carrier A to Carrier B within the same country and service area is a Standard port.
Mixed operator port: A more complex porting situation that involves multiple operators or service providers. For example, porting a range of numbers in a block that belongs to two or more network operators is a Mixed operator port.

Porting of numbers is done in a fixed time slot in the following countries:

Porting time slot	Countries
Monday to Friday between 8 a.m. to 3 p.m.	Switzerland, Belgium, Sweden
Monday to Friday between 9 a.m. to 4 p.m.	Netherlands, Lithuania, Luxembourg, Denmark
Monday to Friday between 8 a.m. to 5 p.m.	Finland

Requests for porting out of hours are on a case-by-case basis and depend on the carriers involved. We can’t guarantee that out of hours porting is available.

1	From the customer view in https://admin.webex.com, go to Calling and click Numbers > Add Numbers.
2	Choose a location and click Select under Port numbers over. Click Next.
3	Add the phone numbers that you want to port, and then click Save & continue.
4	Enter the Date and Time by when you want the porting to finish. The schedule is set based on your preference. But it’s not guaranteed that the porting of your numbers is finished at the exact date and time selected.
5	(Optional) Enter an additional email address, other than the default contact listed, to receive notifications regarding the port order status.
6	Click Next.
7	Enter your current carrier account information in the fields provided. Make sure this matches the information on your previous carrier’s bill.
8	Click Next.
9	Upload your previous carrier bill (not older than 30 days).
10	Click Next.
11	Upload the LOA. The authorized contact for your previous carrier’s account needs to upload the signed LOA. Open a ticket with Webex Partner Help Center to get the LOA required for your country and upload the signed copy here. If you're not the authorized contact, skip this step for now. That person can come back and upload the signed LOA later, we’ll send your order contacts a reminder.
12	Click Save & continue.
13	Your Port Order is submitted. You can check the order status in PSTN Orders.
14	Click Done. Our support team contacts you for any additional documents requirements to complete your porting request. You can upload the requested documents in the right-hand panel of the order. The Firm Order Commitment (FOC) date can be two business days later from the submission date. An FOC is the date on which the losing carrier states that it releases a phone number to the winning carrier. After the losing carrier confirms the porting request, you can cancel or postpone the porting request as per the following rules: These timeframes are estimates and aren’t bound by any SLA. You can cancel or reschedule a standard porting operation to five working days before the porting date. You can cancel or reschedule a mixed operator porting operation to seven working days before the porting date. If porting takes place and you need to roll back the numbers to the previous carrier, raise such requests with the PTS team at the earliest. Rollbacks aren’t always possible and may require placing a port back request with the previous carrier.

Manage PSTN

When placing orders for new numbers or porting existing numbers, you can check the order status or port rejection notices in Control Hub.

A migration banner is displayed when there are locations which need to be migrated from Non-Integrated CCP to Integrated CCP.

From the customer view in https://admin.webex.com, go to Calling and click PSTN.

Every order submitted has a status value.
Select an order to check its status.

Status Values for New Number Orders

Displayed Status	Description

Pending	A New numbers order has been created by the user.
Provisioned	New numbers are provisioned.
Error	An issue is detected with the new numbers order. Create a TAC ticket to get help.
Action Required	Click to contact PTS for assistance.

Status Values for Ported Number Orders

Displayed Status	Description

Pending	User is in the process of creating/filling in details of the Porting Order. Once submitted, the order will still show Pending until Cisco validates and accepts the porting order.
Rejected	Porting issue is detected. See the Porting Errors table for additional details. If required, go to Control Hub and click on the PSTN Help link for PSTN technical support.
Submitted	Porting Order is validated and accepted.
FOC Received	FOC date confirmation from the previous PSTN provider received.
Completed	Porting process is complete.
Canceled	Order is canceled.

Porting Error Messages

Displayed Error	Description	How to fix

Account number mismatch	Account number doesn’t match the number on the Customer Service Record (CSR)	Update the Account Number field on the PSTN Order and resubmit. For some carriers, the account number may be the same as the BTN or the telephone number itself.
Account number required	The account number wasn't provided but is required.	Update the Account Number field on the PSTN Order and resubmit. For some carriers, the account number may be the same as the BTN or the telephone number itself.
Account name mismatch	The person authorizing doesn't match the name on the (CSR).	Update the Authorized name on account field on the PSTN order and resubmit.
BTN mismatch	BTN or ATN doesn’t match that on the CSR.	Update the Carrier billing phone number field on the PSTN Order and resubmit.
Company name mismatch	Entity name does not match that on the CSR.	Update the Company name with previous carrier field on the PSTN order and resubmit.
Multiple BTNs	The OSP requires this Porting Order to be split and submitted as separate orders.	Cancel the current PSTN order and create a new, multiple PSTN Orders. Create one for each group of numbers that have the same BTN.
FOC rejected by losing carrier	The FOC date requested can’t be accommodated by the OSP.	Update the Port Complete date field on the PSTN order and resubmit.
Unknown	Go to Control Hub and click on the PSTN Help link for PSTN technical support.	Go to Control Hub and click on the PSTN Help link for PSTN technical support.
Invalid PIN	Passcode/PIN must be provided for wireless port.	Update the PIN field on the PSTN order and resubmit.
Pending order	The OSP has a pending LSR on the account (for example, a port out or address change).	Remove the telephone numbers in question from the PSTN order and resubmit.
Pending main BTN	BTN is one of the phone numbers being ported. User must indicate Porting Order Type, Remaining Numbers Action, and New Billing Phone Number accordingly.	Remove the main BTN from the list of telephone numbers being ported and resubmit the order. Include the Main BTN into the last iteration of numbers (if porting numbers in multiple iterations).
Service address mismatch	The location info doesn't match that on the CSR.	Update the Service address, State, and City fields and resubmit the order.
TN has special feature	Some of the phone numbers can't be ported because they have a special feature (for example, remote call forward).	Remove numbers with special features from the PSTN order and resubmit. Or, unassign a special features from the numbers being ported.
TN mismatch	Some of the phone numbers don't belong to the end user.	Remove one or more numbers in question and resubmit the order.
TN not portable	Some of the phone numbers can't be ported because they're inactive or aren't part of the end user's account.	Try to remove one or more numbers in question and resubmit the PSTN order.
Unsupported rate center	The rate center isn't portable.	Remove one or more numbers in question and resubmit the order.
Zip/postal code mismatch	Postal code doesn't match the one on the CSR.	Update the Zip code field and resubmit the order.
Previous carrier's bill is invalid	The invoice is invalid.	Go to PSTN Order details, then open Previous Carrier’s Bill section. Upload the correct bill file and resubmit the order.
LOA invalid	The LOA is invalid.	Sign the LOA and resubmit the PSTN order. Alternatively, go to Control Hub and click on the PSTN Help link for PSTN technical support.

PSTN – Public Switched Telephone Network

CSR – Customer Service Record

FOC – Firm Order Commitment

OSP – Old Service Provider

BTN – Billing Telephone Number

ATN – Account Telephone Number

Change the emergency service address for a user

1	From the customer view in https://admin.webex.com, go to Users.
2	Select the user you want to modify and click Calling.
3	Select the primary phone number under Directory Numbers.
4	Under Emergency Service Address, select Custom Address.
5	Update the information for the user and click Save.

Change the emergency service address for a location

Once a location is set up with the Cisco Calling Plan, you can update the Emergency Service Address.

1	From the customer view in https://admin.webex.com, go to Management > Locations and select the location you want to update.
2	Next to PSTN Connection, click Manage.
3	Next to the Emergency Service Address, click Edit.
4	Enter the new addres and click Save.

Supported paths for PSTN migration

Use this matrix to know the potential PSTN migration paths for Webex Calling.

Webex Calling supports the following PSTN migration paths:

Using Self Service through Control Hub
- Premises-based PSTN, non-integrated CCPP, and non-integrated IntelePeer to Cisco Calling Plans. See Migrate to Cisco Calling plans.
- Non-integrated CCP to Integrated CCP. See, Migrating from Non-Integrated CCP to Integrated CCP (webex.com)
- Non-integrated CCP Provider including non-integrated Intelepeer to a Premises-based Solution. See, Configure premises-based PSTN in Control Hub
Using Manual Migration
- Premises-based solution to Integrated CCP Provider
- Integrated CCP Provider to Non-integrated CCP Provider (Exception: Non-integrated Intelepeer isn’t supported as the target CCP Provider)
- Integrated CCP Provider to Premises-based Solution

Here’s a list of unsupported PSTN migration paths:

Cisco Calling Plans to integrated Intelepeer
Integrated Intelepeer to Cisco Calling Plans

Your Cisco Calling Plan bill

When your billing begins:

Outbound Calling Plans ordered in CCW begin billing on the requested service date (RSD).
Outbound Calling Plans provisioned in Control Hub begin billing immediately.
Phone numbers provisioned in Control Hub begin billing immediately or, if ported from another provider, will begin billing upon port completion.

Outbound calling plan rates:

Rates for the Outbound Calling Plans and phone numbers are pro-rated using the same proration methord used to calculate the rates for the Webex Calling licenses.
International calling rates vary by country and are billed the month following usage.

Find support for Cisco Calling Plans

Cisco Calling Plans support is provided by various support divisions, depending on your need.

Table 23. Cisco Support Contact Information
Support Division	Purpose	Contact Information
Partner Help Desk (PHD)	Partner how-to and/or documentation inquiries, Pre-quoting Regulatory Tax and other enquiries about the Cisco Calling Plans offering.	North America: 1-844-613-6108 EMEA: +44 129 366 10 20 APAC: +61 3 7017 7272 Email: webexcalling-phd@cisco.com
PSTN Technical Support (PTS)	Partner/Customer PSTN-related questions Port order expedite requests Port date reschedules Port rejections Specific date/time requests for a port Port date changes post FOC (Firm Order Commitment) Order cancellations	Go to Control Hub and click on PSTN Help link for PSTN technical support.
TAC	Issues with Control Hub functionality Issues with service, such as dropped calls, call quality issues, or service outages	North America: 1-800-553-2447 EMEA: +32 2 704 5555 APAC: +61 2 8446 7411 Email: tac@cisco.com See also: Help with TAC Open a support case
Invoice & Collections	VAT, Payment and other invoicing queries	Contact the Collector on the Invoice via email or phone
Cisco SaaS Support Team (CES)	Quoting Order Booking & Management Provisioning Subscription Management Billing & Invoicing Disputes	Refer Partner Support Playbook and Cisco Calling Plans FAQ Create a case through link below if the required information is not found in the playbook - https://customerservice.cloudapps.cisco.com/

Cisco Calling Plans requirements and limitations

Requirements

Partners must be an authorized Webex Calling partner and have accepted the new Webex Calling addendum through enrollment into the Webex Calling PSTN program.
A minimum of one committed Outbound Calling Plan license must be purchased to enable access to all services associated with Cisco Calling Plans.

Limitations

Cisco Calling Plans are currently available to specified countries.
Existing Webex Calling locations or telephone numbers can only transition to Cisco Calling Plans in certain scenarios. For details on supported migration paths, refer Supported paths for PSTN migration section.
You can order a maximum of 100 new standard phone numbers at a time. Additional numbers can be placed as a separate order.
Toll-free numbers aren’t currently available. You can’t order new toll-free numbers or port existing toll-free numbers to the Cisco Calling Plans.
Cisco Calling Plans aren’t supported with Webex Contact Center or authorized for use in which high-concurrent calls or high-volume calls or uncommonly short or long calls are made. For more information about Webex Contact Center, see Get started with Webex Contact Center.
Some premium services and international destinations may not be available for operational purposes. If specific destinations which are not generally available are required, customers can open a support case to request availability.

Select your PSTN provider

The card view displays the PSTN provider available for the Webex Calling customer before configuring the PSTN location. The PSTN view displays both Providers and Orders.

The provider screen displays the various provider cards with the list of supported service types. The Providers section is classified into the following:

Preferred Calling providers
Certified Calling providers
Calling providers

The providers include the following:

Provider summary
List of locations configured with this provider
List of markets that the provider is available for the supported services.

If the customer has PSTN locations where Calling services aren’t set up, the Select this provider action bar displays. Use this option to configure the service for the PSTN location.

Select the location from the drop-down menu.
Choose the subscription type for the users to use the Cisco Calling plans. Click Next.
Complete the fields for Contract Information and Emergency Service Address configuration.

The PSTN service set up is now complete.

Cisco Calling Plans trials

Each trial account can provision up to 10 standard telephone numbers from Cisco Calling Plans with Webex Calling. It isn’t permitted to provision more than 10 numbers per trial.
Only new, standard telephone numbers are supported in trials. Ported numbers, consecutive blocks, and inbound toll-free numbers aren’t supported on trial accounts. You also cannot port numbers out of a trial. You must convert to a paid account if you wish to use these features.
International calling, along with Premium Service Call types I & II are blocked from use during the trial period.
Business Texting isn’t available on Webex Calling trial accounts.
Trial accounts are intended for technical evaluation purposes only, and not for normal commercial operation. As such, emergency services are only meant for technical evaluation; actual emergency calls can’t be guaranteed. Users shouldn’t place actual emergency service calls on a trial account.

Set up your Cisco Calling Plan

Once your Cisco Calling Plan service is enabled, you can select one of the PSTN options:

Cisco Calling Plans (Cisco PSTN)
Cloud Connected PSTN
Premise-based PSTN (Local Gateway must be enabled separately. For more information, see Configure Premises-based PSTN in Control Hub.)

1	From the customer view in https://admin.webex.com, go to Management > Locations and select the location you want to update.
2	Select the Calling tab and Click Manage next to PTSN Connection.
3	Select Cisco Calling Plans and click Next.
4	Enter the contact information and click Next. This field is for the contact information of the person who will sign the legal contract with Cisco.
5	Enter the Emergency Services Address (ESA), and click Save. By default, the ESA entered here is applied to all phone numbers for this location. You can change the ESA for an individual user if needed. For example, you may need to change the ESA if you have a remote employee who works from home.
6	On the summary screen, do one of the following: Add numbers. Click Done. You can add numbers to your calling plan later.

Order new phone numbers

Before you begin

Enable the Cisco Calling Plan for your site before you order new phone numbers through Control Hub.
By default, the Emergency Service Address (ESA) entered for a location during your Cisco Calling Plan setup is applied to all phone numbers for that location.
Provide the following information for business identity verification:
- First name and last name of the legal representative
- Contact phone number
- Company name
- Local company registration certificate
Provide the following information for address verification:
- Address matching the DID area code (street, building number, postal code, city, and country)
- Proof of address, not older than last three months

Additionally, you must submit a copy of your passport or ID card in the Netherlands, Switzerland, Poland, Greece, and Lithuania. You must provide VAT ID in Sweden and Greece.

1	From the customer view in https://admin.webex.com, go to Calling and then click Numbers > Add Numbers.
2	Choose a location and click Select under Order new numbers. Click Next. You’re directed to Contact Support to order a new numbers.
3	Click Contact Support. Your location information is automatically populated on the Case Details window.
4	Indicate how many new numbers you’re requesting in the Number of Telephone Numbers Requested field.
5	From the Number Type drop-down list, choose Local or National as the case maybe.
6	(Optional) Enter the additional details.
7	Click Submit. You receive a PSTN Order Number which displays on the PSTN order page. It can take up to five to seven business days for the ordering and document approval process.

Port phone numbers

Before you begin

We strongly recommend you to read and familiarize yourself with the Cisco Calling Plan Number Porting Guidelines and Policies before you start porting the numbers.

Enable Cisco Calling Plan for your location before you port phone numbers through the Control Hub.
A signed Letter of Agency (LOA) is needed, authorizing Cisco to place orders with the current PSTN carrier to move the service to Cisco. The LOA must be signed by the current account owner or authorized signer. You're prompted to sign the LOA while completing the porting steps.
Make sure you have a recent bill in PNG or PDF format from your current PSTN provider. The bill must not be older than 30 days. While completing the porting steps, you’re prompted to upload a copy of your bill.
For successful porting, ensure that you have the following information ready:
- List of all phone numbers to port (non-toll free)
- Current PSTN provider account information
- Customer Service Record (CSR) if available
- Your account PIN if one exists
- VAT ID or any Tax ID
When planning for which numbers to port, we recommend that you consider any number that receives inbound calls. See Cisco Calling Plan Number Policy for more information.
By default, the Emergency Service Address (ESA) entered for a location during your Cisco Calling Plan setup is applied to all phone numbers for that location.

As an administrator, you can move existing phone numbers from your current PSTN to the Cisco Calling Plan option. The following are the types of porting services:

Standard port: When a phone number moves from one service provider to another, without any special circumstances. For example, porting a number from Carrier A to Carrier B within the same country and service area is a Standard port.
Mixed operator port: A more complex porting situation that involves multiple operators or service providers. For example, porting a range of numbers in a block that belongs to two or more network operators is a Mixed operator port.

Porting of numbers is done on Monday to Friday between 8 a.m. to 3 p.m.

Requests for porting out of hours are on a case-by-case basis and depend on the carriers involved. We can’t guarantee that out of hours porting is available.

You cannot port out a single number belonging to a Direct Dial Inward (DDI) range. For porting a DDI range, it must include at least 10 successive numbers or a multiple of it. The first number in the range to end with 0 and the last number in the range to end with 9. These details are available with the current PSTN provider.

1	From the customer view in https://admin.webex.com, go to Calling and click Numbers > Add Numbers.
2	Choose a location and click Select under Port numbers over. Click Next.
3	Add the phone numbers that you want to port, and then click Save & continue.
4	Enter the Date and Time by when you want the porting to finish. The schedule is set based on your preference. But it’s not guaranteed that the porting of your numbers is finished at the exact date and time selected.
5	(Optional) Enter an additional email address, other than the default contact listed, to receive notifications regarding the port order status.
6	Click Next.
7	Enter your current carrier account information in the fields provided. Make sure this matches the information on your previous carrier’s bill.
8	Click Next.
9	Upload your previous carrier bill (not older than 30 days).
10	Click Next.
11	Upload the LOA. The authorized contact for your previous carrier’s account needs to upload the signed LOA. Open a ticket with Webex Partner Help Center to get the LOA required for your country and upload the signed copy here. If you're not the authorized contact, skip this step for now. That person can come back and upload the signed LOA later, we’ll send your order contacts a reminder.
12	Click Save & continue.
13	Your Port Order is submitted. You can check the order status in PSTN Orders.
14	Click Done. Our support team contacts you for any additional documents requirements to complete your porting request. You can upload the requested documents in the right-hand panel of the order. The Firm Order Commitment (FOC) date can be two business days later from the submission date. An FOC is the date on which the losing carrier states that it releases a phone number to the winning carrier. After the losing carrier confirms the porting request, you can cancel or postpone the porting request as per the following rules: These timeframes are estimates and aren’t bound by any SLA. You can cancel or reschedule a standard porting operation to five working days before the porting date. You can cancel or reschedule a mixed operator porting operation to seven working days before the porting date. If porting takes place and you need to roll back the numbers to the previous carrier, raise such requests with the PTS team at the earliest. Rollbacks aren’t always possible and may require placing a port back request with the previous carrier.

Manage PSTN

When placing orders for new numbers or porting existing numbers, you can check the order status or port rejection notices in Control Hub.

A migration banner is displayed when there are locations which need to be migrated from Non-Integrated CCP to Integrated CCP.

From the customer view in https://admin.webex.com, go to Calling and click PSTN.

Every order submitted has a status value.
Select an order to check its status.

Status Values for New Number Orders

Displayed Status	Description

Pending	A New numbers order has been created by the user.
Provisioned	New numbers are provisioned.
Error	An issue is detected with the new numbers order. Create a TAC ticket to get help.
Action Required	Click to contact PTS for assistance.

Status Values for Ported Number Orders

Displayed Status	Description

Pending	User is in the process of creating/filling in details of the Porting Order. Once submitted, the order will still show Pending until Cisco validates and accepts the porting order.
Rejected	Porting issue is detected. See the Porting Errors table for additional details. If required, go to Control Hub and click on the PSTN Help link for PSTN technical support.
Submitted	Porting Order is validated and accepted.
FOC Received	FOC date confirmation from the previous PSTN provider received.
Completed	Porting process is complete.
Canceled	Order is canceled.

Porting Error Messages

Displayed Error	Description	How to fix

Account number mismatch	Account number doesn’t match the number on the Customer Service Record (CSR)	Update the Account Number field on the PSTN Order and resubmit. For some carriers, the account number may be the same as the BTN or the telephone number itself.
Account number required	The account number wasn't provided but is required.	Update the Account Number field on the PSTN Order and resubmit. For some carriers, the account number may be the same as the BTN or the telephone number itself.
Account name mismatch	The person authorizing doesn't match the name on the (CSR).	Update the Authorized name on account field on the PSTN order and resubmit.
BTN mismatch	BTN or ATN doesn’t match that on the CSR.	Update the Carrier billing phone number field on the PSTN Order and resubmit.
Company name mismatch	Entity name does not match that on the CSR.	Update the Company name with previous carrier field on the PSTN order and resubmit.
Multiple BTNs	The OSP requires this Porting Order to be split and submitted as separate orders.	Cancel the current PSTN order and create a new, multiple PSTN Orders. Create one for each group of numbers that have the same BTN.
FOC rejected by losing carrier	The FOC date requested can’t be accommodated by the OSP.	Update the Port Complete date field on the PSTN order and resubmit.
Unknown	Go to Control Hub and click on the PSTN Help link for PSTN technical support.	Go to Control Hub and click on the PSTN Help link for PSTN technical support.
Invalid PIN	Passcode/PIN must be provided for wireless port.	Update the PIN field on the PSTN order and resubmit.
Pending order	The OSP has a pending LSR on the account (for example, a port out or address change).	Remove the telephone numbers in question from the PSTN order and resubmit.
Pending main BTN	BTN is one of the phone numbers being ported. User must indicate Porting Order Type, Remaining Numbers Action, and New Billing Phone Number accordingly.	Remove the main BTN from the list of telephone numbers being ported and resubmit the order. Include the Main BTN into the last iteration of numbers (if porting numbers in multiple iterations).
Service address mismatch	The location info doesn't match that on the CSR.	Update the Service address, State, and City fields and resubmit the order.
TN has special feature	Some of the phone numbers can't be ported because they have a special feature (for example, remote call forward).	Remove numbers with special features from the PSTN order and resubmit. Or, unassign a special features from the numbers being ported.
TN mismatch	Some of the phone numbers don't belong to the end user.	Remove one or more numbers in question and resubmit the order.
TN not portable	Some of the phone numbers can't be ported because they're inactive or aren't part of the end user's account.	Try to remove one or more numbers in question and resubmit the PSTN order.
Unsupported rate center	The rate center isn't portable.	Remove one or more numbers in question and resubmit the order.
Zip/postal code mismatch	Postal code doesn't match the one on the CSR.	Update the Zip code field and resubmit the order.
Previous carrier's bill is invalid	The invoice is invalid.	Go to PSTN Order details, then open Previous Carrier’s Bill section. Upload the correct bill file and resubmit the order.
LOA invalid	The LOA is invalid.	Sign the LOA and resubmit the PSTN order. Alternatively, go to Control Hub and click on the PSTN Help link for PSTN technical support.

PSTN – Public Switched Telephone Network

CSR – Customer Service Record

FOC – Firm Order Commitment

OSP – Old Service Provider

BTN – Billing Telephone Number

ATN – Account Telephone Number

Change the emergency service address for a user

1	From the customer view in https://admin.webex.com, go to Users.
2	Select the user you want to modify and click Calling.
3	Select the primary phone number under Directory Numbers.
4	Under Emergency Service Address, select Custom Address.
5	Update the information for the user and click Save.

Change the emergency service address for a location

Once a location is set up with the Cisco Calling Plan, you can update the Emergency Service Address.

1	From the customer view in https://admin.webex.com, go to Management > Locations and select the location you want to update.
2	Next to PSTN Connection, click Manage.
3	Next to the Emergency Service Address, click Edit.
4	Enter the new addres and click Save.

Supported paths for PSTN migration

Use this matrix to know the potential PSTN migration paths for Webex Calling.

Webex Calling supports the following PSTN migration paths:

Using Self Service through Control Hub
- Premises-based PSTN, non-integrated CCPP, and non-integrated IntelePeer to Cisco Calling Plans. See Migrate to Cisco Calling plans.
- Non-integrated CCP to Integrated CCP. See, Migrating from Non-Integrated CCP to Integrated CCP (webex.com)
- Non-integrated CCP Provider including non-integrated Intelepeer to a Premises-based Solution. See, Configure premises-based PSTN in Control Hub
Using Manual Migration
- Premises-based solution to Integrated CCP Provider
- Integrated CCP Provider to Non-integrated CCP Provider (Exception: Non-integrated Intelepeer isn’t supported as the target CCP Provider)
- Integrated CCP Provider to Premises-based Solution

Here’s a list of unsupported PSTN migration paths:

Cisco Calling Plans to integrated Intelepeer
Integrated Intelepeer to Cisco Calling Plans

Your Cisco Calling Plan bill

When your billing begins:

Outbound Calling Plans ordered in CCW begin billing on the requested service date (RSD).
Outbound Calling Plans provisioned in Control Hub begin billing immediately.
Phone numbers provisioned in Control Hub begin billing immediately or, if ported from another provider, will begin billing upon port completion.

Outbound calling plan rates:

Rates for the Outbound Calling Plans and phone numbers are pro-rated using the same proration methord used to calculate the rates for the Webex Calling licenses.
International calling rates vary by country and are billed the month following usage.

Find support for Cisco Calling Plans

Cisco Calling Plans support is provided by various support divisions, depending on your need.

Table 24. Cisco Support Contact Information
Support Division	Purpose	Contact Information
Partner Help Desk (PHD)	Partner how-to and/or documentation inquiries, Pre-quoting Regulatory Tax and other enquiries about the Cisco Calling Plans offering.	North America: 1-844-613-6108 EMEA: +44 129 366 10 20 APAC: +61 3 7017 7272 Email: webexcalling-phd@cisco.com
PSTN Technical Support (PTS)	Partner/Customer PSTN-related questions Port order expedite requests Port date reschedules Port rejections Specific date/time requests for a port Port date changes post FOC (Firm Order Commitment) Order cancellations	Go to Control Hub and click on PSTN Help link for PSTN technical support.
TAC	Issues with Control Hub functionality Issues with service, such as dropped calls, call quality issues, or service outages	North America: 1-800-553-2447 EMEA: +32 2 704 5555 APAC: +61 2 8446 7411 Email: tac@cisco.com See also: Help with TAC Open a support case
Invoice & Collections	VAT, Payment and other invoicing queries	Contact the Collector on the Invoice via email or phone
Cisco SaaS Support Team (CES)	Quoting Order Booking & Management Provisioning Subscription Management Billing & Invoicing Disputes	Refer Partner Support Playbook and Cisco Calling Plans FAQ Create a case through link below if the required information is not found in the playbook - https://customerservice.cloudapps.cisco.com/

Cisco Calling Plans requirements and limitations

Requirements

Partners must be an authorized Webex Calling partner and have accepted the new Webex Calling addendum through enrollment into the Webex Calling PSTN program.
A minimum of one committed Outbound Calling Plan license must be purchased to enable access to all services associated with Cisco Calling Plans.

Limitations

Cisco Calling Plans are currently available to specified countries.
Existing Webex Calling locations or telephone numbers can only transition to Cisco Calling Plans in certain scenarios. For details on supported migration paths, refer Supported paths for PSTN migration section.
You can order a maximum of 100 new standard phone numbers at a time. Additional numbers can be placed as a separate order.
Toll-free numbers aren’t currently available. You can’t order new toll-free numbers or port existing toll-free numbers to the Cisco Calling Plans.
Cisco Calling Plans aren’t supported with Webex Contact Center or authorized for use in which high-concurrent calls or high-volume calls or uncommonly short or long calls are made. For more information about Webex Contact Center, see Get started with Webex Contact Center.
Some premium services and international destinations may not be available for operational purposes. If specific destinations which are not generally available are required, customers can open a support case to request availability.

Select your PSTN provider

The card view displays the PSTN provider available for the Webex Calling customer before configuring the PSTN location. The PSTN view displays both Providers and Orders.

The provider screen displays the various provider cards with the list of supported service types. The Providers section is classified into the following:

Preferred Calling providers
Certified Calling providers
Calling providers

The providers include the following:

Provider summary
List of locations configured with this provider
List of markets that the provider is available for the supported services.

If the customer has PSTN locations where Calling services aren’t set up, the Select this provider action bar displays. Use this option to configure the service for the PSTN location.

Select the location from the drop-down menu.
Choose the subscription type for the users to use the Cisco Calling plans. Click Next.
Complete the fields for Contract Information and Emergency Service Address configuration.

The PSTN service set up is now complete.

Cisco Calling Plans trials

Each trial account can provision up to 10 standard telephone numbers from Cisco Calling Plans with Webex Calling. It isn’t permitted to provision more than 10 numbers per trial.
Only new, standard telephone numbers are supported in trials. Ported numbers, consecutive blocks, and inbound toll-free numbers aren’t supported on trial accounts. You also cannot port numbers out of a trial. You must convert to a paid account if you wish to use these features.
International calling, along with Premium Service Call types I & II are blocked from use during the trial period.
Business Texting isn’t available on Webex Calling trial accounts.
Trial accounts are intended for technical evaluation purposes only, and not for normal commercial operation. As such, emergency services are only meant for technical evaluation; actual emergency calls can’t be guaranteed. Users shouldn’t place actual emergency service calls on a trial account.

Set up your Cisco Calling Plan

Once your Cisco Calling Plan service is enabled, you can select one of the PSTN options:

Cisco Calling Plans (Cisco PSTN)
Cloud Connected PSTN
Premise-based PSTN (Local Gateway must be enabled separately. For more information, see Configure Premises-based PSTN in Control Hub.)

1	From the customer view in https://admin.webex.com, go to Management > Locations and select the location you want to update.
2	Select the Calling tab and Click Manage next to PTSN Connection.
3	Select Cisco Calling Plans and click Next.
4	Enter the contact information and click Next. This field is for the contact information of the person who will sign the legal contract with Cisco.
5	Enter the Emergency Services Address (ESA), and click Save. By default, the ESA entered here is applied to all phone numbers for this location. You can change the ESA for an individual user if needed. For example, you may need to change the ESA if you have a remote employee who works from home.
6	On the summary screen, do one of the following: Add numbers. Click Done. You can add numbers to your calling plan later.

Order new phone numbers

With the Cisco Calling Plan, you can order new phone numbers directly from Cisco through Control Hub.

Before you begin

The Cisco Calling Plan must be enabled for your location before you can order new phone numbers through Control Hub.
When requesting new numbers, you can enter specific numbers or a block of consecutive numbers. You can also allow the system to assign numbers from the search inventory based on the country, state, area code, and prefix you select.
By default, the Emergency Service Address (ESA) entered for a location during your Cisco Calling Plan setup is applied to all phone numbers for that location.

1	From the customer view in https://admin.webex.com, go to Calling and click Numbers > Add Numbers.
2	Choose a location and click Select under Order New Numbers. Click Next.
3	Specify the numbers you want to order by selecting the Country, Area Code, and City from the drop-down. New numbers can be requested as local or non-geographic (not linked to a specific locality).
4	Enter how many numbers you want auto-selected for you and click Search. You are provided a list of available numbers based on your selected criteria.
5	Click the numbers you would like to order, then click Order.
6	On the order submission confirmation page, select PSTN Orders to check your order status. This brings you to the PSTN Orders page.
7	Accept the Terms of Service to activate the new numbers. The Terms of Service link is only available to customer administrators. Partners only see a message that the Terms of Service needs to be signed by the customer.

Order a block of numbers

With the Cisco Calling Plan, you can order blocks of telephone numbers directly from Cisco through Control Hub.

Before you begin

Ordering blocks of numbers is only available for customers with a paid subscription.
The maximum number of block numbers that can be ordered is 100.
Numbers ordered in a block can only be deleted if the entire block is deleted.
By default, the Emergency Service Address (ESA) entered for a location during your Cisco Calling Plan setup is applied to all phone numbers for that location.

1	From the customer view in https://admin.webex.com, go to Calling and click Numbers > Add Numbers.
2	Choose a location and select Order New Numbers, click Next.
3	Select the toggle for Get a Set of Numbers that Follow Each Other in Order.
4	From the drop-down, select the quantity of block numbers needed.
5	Specify State and use either Area Code/Prefix or City as your search criteria, and click Search.
6	Select from the list of available blocks of numbers provided, based on your search criteria, and click Order.
7	On the order submission confirmation page, select the PSTN Orders to check your order status. This brings you to the PSTN Orders page.
8	Accept the Terms of Service to activate the new numbers.

Port phone numbers

As an administrator, you can move existing phone numbers from your current PSTN to the Cisco Calling Plan option.

Before you begin

We strongly recommend you to read and familiarize yourself with the Cisco Calling Plan Number Porting Guidelines and Policies before you start porting the numbers.

Enable Cisco Calling Plan for your location before you port phone numbers through Control Hub.
A signed Letter of Agency (LOA) is needed, authorizing Cisco to place orders with the current PSTN carrier to move the service to Cisco. The LOA must be signed by the current account owner or authorized signer. You're prompted to sign the LOA while completing the porting steps.
Make sure you have a recent bill in PNG or PDF formate from your current PSTN provider. The bill must be from the last 30 days. While completing the porting steps, you’re prompted to upload a copy of your bill.
To ensure a successful port, make sure you have the following information ready:
- List of all phone numbers to port (non-toll free)
- Current PSTN provider account information
- Customer Service Record (CSR) if available
- Your account PIN if one exists
When planning for which numbers to port, we recommend that you consider any number that receives inbound calls. See Cisco Calling Plan Number Policy for more information.
By default, the Emergency Service Address (ESA) entered for a location during your Cisco Calling Plan setup is applied to all phone numbers for that location.

1	From the customer view in https://admin.webex.com, go to Calling and click Numbers > Add Numbers.
2	Choose a location and click Select under Port Numbers Over. Click Next.
3	Add the phone numbers you would like to keep, and then click Save & continue. Note: When adding the numbers you’d like to keep, select the line type from the drop-down Single line Multi-line Single line Multi-line A portability check is automatically run when numbers are entered. Highlighted numbers are considered non-portable. Further review of these instances is supported by PSTN Technical Support.
4	Enter your account information with your current provider. Make sure that the information entered matches your current provider bill. Click Next.
5	Upload a bill from your previous provider. Make sure the bill is from the last 30 days and is in PNG or PDF format. Click Next.
6	Enter your first and last name and job title to sign the Letter of Agency (LOA). Click Sign & Submit.
7	Review your order and click Next.
8	The order submission screen shows a summary of your port order. Click Done. Control Hub conducts a preliminary error check before a port order is submitted. If there are any issues found with a port order, administrators receive an email notification and an error message appears on the PSTN Orders screen.

Manage PSTN

When placing orders for new numbers or porting numbers, administrators can check order status or port rejection notices in Control Hub.

A migration banner is displayed when there are locations which need to be migrated from Non-Integrated CCP to Integrated CCP.

From the customer view in https://admin.webex.com, go to Calling and click PSTN.

Each order submitted is listed with a status value.
Click on the order to check status information.

Status Values for New Number Orders

Displayed Status	Description

Pending	New numbers order is created by the user.
Provisioned	New numbers are provisioned.
Error	Issue is detected with the new numbers order. Create a TAC ticket to receive help.

Status Values for Ported Number Orders

Displayed Status	Description

Pending	User is in the process of creating/filling in details of the Porting Order. Once submitted, the order will still show Pending until Cisco validates and accepts the porting order.
Rejected	Porting issue is detected. See the Porting Errors table for additional details or/and contact PSTN Technical Support, if required, for additional help.
Submitted	Porting Order is validated and accepted.
FOC Received	FOC date confirmation from the previous PSTN provider received.
Completed	Porting process is complete.
Canceled	Order is canceled.

Porting Error Messages

Displayed Error	Description	How to fix

Account number mismatch	Account number does not match that on the (CSR).	Update the Account Number field on the PSTN Order and resubmit. For some carriers, the account number may be the same as the BTN or the telephone number itself.
Account number required	The account number was not provided but is required.	Update the Account Number field on the PSTN Order and re-submit. For some carriers, the account number may be the same as the BTN or the telephone number itself.
Account name mismatch	Person authorizing does not match that on the (CSR).	Update the Authorized name on account field on the PSTN Order and resubmit.
BTN mismatch	BTN or ATN does not match that on the CSR.	Update the Carrier billing phone number field on PSTN Order and resubmit.
Company name mismatch	Entity name does not match that on the CSR.	Update the Company name with previous carrier field on PSTN order and resubmit.
Multiple BTNs	The OSP requires this Porting Order to be split and submitted as separate orders.	Cancel current PSTN Order and create new, multiple PSTN Orders. Create one for each group of numbers that have the same BTN.
FOC rejected by losing carrier	The FOC date requested cannot be accommodated by the OSP.	Update the Port Complete date field on PSTN Order and resubmit.
Unknown	Contact PSTN Technical Support team (PTS) for details.	Contact PSTN Technical Support team (PTS) for details.
Invalid PIN	Passcode/PIN must be provided for wireless port.	Update the PIN field on PSTN Order and resubmit.
Pending order	The OSP has a pending LSR on the account (for exmaple, a port out or address change).	Remove the telephone numbers in question from the PSTN Order and resubmit.
Pending main BTN	BTN is one of the phone numbers being ported. User must indicate Porting Order Type, Remaining Numbers Action, and New Billing Phone Number accordingly.	Remove the main BTN from the list of telephone numbers being ported and resubmit the order. Please include the Main BTN into the last iteration of numbers (if porting numbers in multiple iterations).
Service address mismatch	The location info does not match that on the CSR.	Update the Service address, State, and City fields and resubmit the order.
TN has special feature	Some of the phone numbers cannot be ported because they have a special feature (for example, remote call forward).	Remove number(s) with special features from the PSTN Order and resubmit. Or, unassign special feature from the numbers being ported.
TN mismatch	Some of the phone numbers do not belong to the end user.	Remove the number(s) in question and resubmit the order.
TN not portable	Some of the phone numbers can't be ported because they are inactive or are not part of the end user's account.	Try to remove the number(s) in question and resubmit the PSTN Order.
Unsupported rate center	The rate center is not portable.	Remove the number(s) in question and resubmit the order.
Zip/postal code mismatch	Postal code does not match that on the CSR.	Update the Zip code field and resubmit the order.
Previous carrier's bill is invalid	The invoice is invalid.	Go to PSTN Order details, open Previous Carrier’s Bill section. Upload the correct bill file and resubmit the order.
LOA invalid	The LOA is invalid.	Sign LOA and re-submit PSTN Order or contact PSTN Technical Support team (PTS).

PSTN – Public Switched Telephone Network

CSR – Customer Service Record

FOC – Firm Order Commitment

OSP – Old Service Provider

BTN – Billing Telephone Number

ATN – Account Telephone Number

Change the emergency service address for a user

1	From the customer view in https://admin.webex.com, go to Users.
2	Select the user you want to modify and click Calling.
3	Select the primary phone number under Directory Numbers.
4	Under Emergency Service Address, select Custom Address.
5	Update the information for the user and click Save.

Change the emergency service address for a location

Once a location is set up with the Cisco Calling Plan, you can update the Emergency Service Address.

1	From the customer view in https://admin.webex.com, go to Management > Locations and select the location you want to update.
2	Next to PSTN Connection, click Manage.
3	Next to the Emergency Service Address, click Edit.
4	Enter the new addres and click Save.

Supported paths for PSTN migration

Use this matrix to know the potential PSTN migration paths for Webex Calling.

Webex Calling supports the following PSTN migration paths:

Using Self Service through Control Hub
- Premises-based PSTN, non-integrated CCPP, and non-integrated IntelePeer to Cisco Calling Plans. See Migrate to Cisco Calling plans.
- Non-integrated CCP to Integrated CCP. See, Migrating from Non-Integrated CCP to Integrated CCP (webex.com)
- Non-integrated CCP Provider including non-integrated Intelepeer to a Premises-based Solution. See, Configure premises-based PSTN in Control Hub
Using Manual Migration
- Premises-based solution to Integrated CCP Provider
- Integrated CCP Provider to Non-integrated CCP Provider (Exception: Non-integrated Intelepeer isn’t supported as the target CCP Provider)
- Integrated CCP Provider to Premises-based Solution

Here’s a list of unsupported PSTN migration paths:

Cisco Calling Plans to integrated Intelepeer
Integrated Intelepeer to Cisco Calling Plans

Your Cisco Calling Plan bill

When your billing begins:

Outbound Calling Plans ordered in CCW begin billing on the requested service date (RSD).
Outbound Calling Plans provisioned in Control Hub begin billing immediately.
Phone numbers provisioned in Control Hub begin billing immediately or, if ported from another provider, will begin billing upon port completion.

Outbound calling plan rates:

Rates for the Outbound Calling Plans and phone numbers are pro-rated using the same proration methord used to calculate the rates for the Webex Calling licenses.
International calling rates vary by country and are billed the month following usage.

Find support for Cisco Calling Plans

Cisco Calling Plans support is provided by various support divisions, depending on your need.

Table 25. Cisco Support Contact Information
Support Division	Purpose	Contact Information
Partner Help Desk (PHD)	Partner how-to and/or documentation inquiries, Pre-quoting Regulatory Tax and other enquiries about the Cisco Calling Plans offering.	North America: 1-844-613-6108 EMEA: +44 129 366 10 20 APAC: +61 3 7017 7272 Email: webexcalling-phd@cisco.com
PSTN Technical Support (PTS)	Partner/Customer PSTN-related questions Port order expedite requests Port date reschedules Port rejections Specific date/time requests for a port Port date changes post FOC (Firm Order Commitment) Order cancellations	Go to Control Hub and click on PSTN Help link for PSTN technical support.
TAC	Issues with Control Hub functionality Issues with service, such as dropped calls, call quality issues, or service outages	North America: 1-800-553-2447 EMEA: +32 2 704 5555 APAC: +61 2 8446 7411 Email: tac@cisco.com See also: Help with TAC Open a support case
Invoice & Collections	VAT, Payment and other invoicing queries	Contact the Collector on the Invoice via email or phone
Cisco SaaS Support Team (CES)	Quoting Order Booking & Management Provisioning Subscription Management Billing & Invoicing Disputes	Refer Partner Support Playbook and Cisco Calling Plans FAQ Create a case through link below if the required information is not found in the playbook - https://customerservice.cloudapps.cisco.com/

Cisco Calling Plans requirements and limitations

Requirements

Partners must be an authorized Webex Calling partner and have accepted the new Webex Calling addendum through enrollment into the Webex Calling PSTN program.
A minimum of one committed Outbound Calling Plan license must be purchased to enable access to all services associated with Cisco Calling Plans.

Limitations

Cisco Calling Plans are currently available to specified countries.
Existing Webex Calling locations or telephone numbers can only transition to Cisco Calling Plans in certain scenarios. For details on supported migration paths, refer Supported paths for PSTN migration section.
You can order a maximum of 100 new standard phone numbers at a time. Additional numbers can be placed as a separate order.
Toll-free numbers aren’t currently available. You can’t order new toll-free numbers or port existing toll-free numbers to the Cisco Calling Plans.
Cisco Calling Plans aren’t supported with Webex Contact Center or authorized for use in which high-concurrent calls or high-volume calls or uncommonly short or long calls are made. For more information about Webex Contact Center, see Get started with Webex Contact Center.
Some premium services and international destinations may not be available for operational purposes. If specific destinations which are not generally available are required, customers can open a support case to request availability.

Select your PSTN provider

The card view displays the PSTN provider available for the Webex Calling customer before configuring the PSTN location. The PSTN view displays both Providers and Orders.

The provider screen displays the various provider cards with the list of supported service types. The Providers section is classified into the following:

Preferred Calling providers
Certified Calling providers
Calling providers

The providers include the following:

Provider summary
List of locations configured with this provider
List of markets that the provider is available for the supported services.

If the customer has PSTN locations where Calling services aren’t set up, the Select this provider action bar displays. Use this option to configure the service for the PSTN location.

Select the location from the drop-down menu.
Choose the subscription type for the users to use the Cisco Calling plans. Click Next.
Complete the fields for Contract Information and Emergency Service Address configuration.

The PSTN service set up is now complete.

Cisco Calling Plans trials

Each trial account can provision up to 10 standard telephone numbers from Cisco Calling Plans with Webex Calling. It isn’t permitted to provision more than 10 numbers per trial.
Only new, standard telephone numbers are supported in trials. Ported numbers, consecutive blocks, and inbound toll-free numbers aren’t supported on trial accounts. You also cannot port numbers out of a trial. You must convert to a paid account if you wish to use these features.
International calling, along with Premium Service Call types I & II are blocked from use during the trial period.
Business Texting isn’t available on Webex Calling trial accounts.
Trial accounts are intended for technical evaluation purposes only, and not for normal commercial operation. As such, emergency services are only meant for technical evaluation; actual emergency calls can’t be guaranteed. Users shouldn’t place actual emergency service calls on a trial account.

Set up your Cisco Calling Plan

Once your Cisco Calling Plan service is enabled, you can select one of the PSTN options:

Cisco Calling Plans (Cisco PSTN)
Cloud Connected PSTN
Premise-based PSTN (Local Gateway must be enabled separately. For more information, see Configure Premises-based PSTN in Control Hub.)

1	From the customer view in https://admin.webex.com, go to Management > Locations and select the location you want to update.
2	Select the Calling tab and Click Manage next to PTSN Connection.
3	Select Cisco Calling Plans and click Next.
4	Enter the contact information and click Next. This field is for the contact information of the person who will sign the legal contract with Cisco.
5	Enter the Emergency Services Address (ESA), and click Save. By default, the ESA entered here is applied to all phone numbers for this location. You can change the ESA for an individual user if needed. For example, you may need to change the ESA if you have a remote employee who works from home.
6	On the summary screen, do one of the following: Add numbers. Click Done. You can add numbers to your calling plan later.

Order new phone numbers

With the Cisco Calling Plan, you can order new phone numbers directly from Cisco through Control Hub.

Before you begin

The Cisco Calling Plan must be enabled for your site before you can order new phone numbers through Control Hub.
When requesting new numbers, you can enter specific numbers. You can also allow the system to assign numbers from the search inventory based on the country, and city you select.
By default, the Emergency Service Address (ESA) entered for a location during your Cisco Calling Plan setup is applied to all phone numbers for that location.

1	From the customer view in https://admin.webex.com, go to Calling and click Numbers > Add Numbers.
2	Choose a location and click Select under Order New Numbers. Click Next.
3	Specify the Country, State, and the Area Code or City to search by.
4	Enter how many numbers you want auto-selected for you and click Search. You are provided a list of available numbers based on your selected criteria.
5	Select from the list of available numbers provided, based on your search criteria, and click Order. The selected numbers are displayed as pending to reserve.
6	Click Save Cart to reserve the selected numbers.
7	(Optional) Click X to remove the numbers from the cart
8	(Optional) Click Save Cart to update the reserved numbers.
9	Click Order to order the numbers selected.
10	Click View Order. On the order submission confirmation page, select the PSTN Orders to check your order status. This brings you to the PSTN Orders page.
11	Click on the PSTN Order to view order overview and order details.
12	Click Additional Information on the order overview side panel to upload Address Proof and Business Registration Document. The address proof and business registration document can be uploaded either from a pending number order or an ESA order. A provisioned number order does not allow you to upload additional documents.
13	Click Address Proof and Business Registration Document fields to upload the documents.
14	Click Choose a file to upload the documents. Browse the files from your system and click Open to upload documents.
15	Click X to close the side panel once you upload the documents.

Advance number ordering

With the Cisco Calling Plan, you can order in advance new phone numbers directly from the Control Hub when there are no numbers available for a specific city or area. Advance ordering is only available for paid organizations.

1	From Control Hub, go to Servcies, and choose Calling > Numbers.
2	Click Manage > Add
3	Choose an Australia location from the Location drop-down menu which has a Cisco PSTN.
4	Select Order New Numbers and click Next.
5	Select City from the Search by drop-down.
6	Select a city from the City drop-down without any numbers assigned.
7	Click Search to search for any numbers assigned to the city.
8	Click Request, an Advance Order window to order numbers for the selected city displays.
9	Enter how many numbers that you want to order and click Add Advance Order to Cart. The cart displays based on your criteria and reserves the order.
10	Click Order to proceed and order the numbers reserved in the cart. The advanced order is successfully submitted.
11	Click View Order. This brings you to the PSTN Orders page.
12	Click on the PSTN Order to view an order overview and order details.
13	Click Phone Numbers on the order overview side panel to see the order details (Quantity and the city). You can open a Cisco support case in case you need more help on the advanced order placed.
14	Click Additional Information on the order overview side panel to upload the Address Proof and Business Registration Document. You can upload the address proof and business registration document either from a pending number order or an ESA order. A provisioned number order doesn’t allow you to upload additional documents.
15	Click Address Proof and Business Registration Document fields to upload the documents.
16	Click Choose a file to upload the documents. Browse the files from your system and click Open to upload documents.
17	Click Cancel Order to cancel the order. Canceling the order stops any progress made in ordering all numbers associated with this order and you can only cancel the order in the Calling Partner Help Center. Click Yes, Continue to confirm order cancellation and you’re redirected to the PTS page. Enter Customer Contact Number and click Submit to raise a support case.

Port Numbers

As an administrator, you can move existing phone numbers, including toll-free numbers, from your current PSTN to the Cisco Calling Plan option.

Before you begin

We strongly recommend you to read and familiarize yourself with the Cisco Calling Plan Number Porting Guidelines and Policies before you start porting the numbers.

Enable Cisco Calling Plan for your site before you port phone numbers through Control Hub.
A signed Letter of Agency (LOA) is needed, authorizing Cisco to place orders with the current PSTN carrier to move the service to Cisco. The current account owner or authorized signer must sign the LOA. You're prompted to sign the LOA while completing the porting steps.
To ensure a successful port, make sure you have the following information ready:
- List of all phone numbers to port
- Current PSTN provider account information
- Customer Service Record (CSR) if available
- Your account PIN if one exists.
When planning for which numbers to port, we recommend that you consider any number that receives inbound calls. See Cisco Calling Plan Number Policy for more information.
By default, the Emergency Service Address (ESA) entered for a location during your Cisco Calling Plan setup is applied to all phone numbers for that location.

When you request for porting a number, both Calling and Messaging services related to the number are ported. If you don’t want to port both these services, then contact PSTN Technical Support. Go to Control Hub and click on PSTN Help link for PSTN technical support.

1	From the customer view in https://admin.webex.com, go to Calling and click Manage > Add .
2	Choose a location and click Select under Port Numbers Over. Click Next.
3	Add the phone number that you want to keep, and then click Save & continue. Highlighted numbers are considered non-portable. PSTN Technical Support supports further review of these instances. The screenshot shows non-portable numbers highlighted in red in the Numbers page. For AU porting, the result of the portability check takes time. Once the numbers are ported, the user can view the number status in the PSTN overview > Phone numbers page. You receive an email after the porting process completes.
4	Enter the desired port information in the Port order details page. Make sure to enter the email address in the Additional contact field. Click Next.
5	Enter your contact information based on your current carrier provider in the Account information page. Enter the ACN/ABN number, which is the Australia Company/Business number. The ACN/ABN field applies based on the carrier provider.
6	Review your order and click Next. Use the Additional information section to upload all the required documents. The Additional information section is in the PSTN order overview page and displays before you review the order summary. To cancel an AU port order, create a PEGA case. In the PSTN order overview page, click on Cancel order and then click Yes, continue. You’re redirected to PEGA to create the port order cancellation support case.
7	The order submission screen shows a summary of your port order. Click Done. Control Hub conducts a preliminary error check before you submit a port order. If there are any issues found with a port order, administrators receive an email notification, and an error message appears on the PSTN Orders screen. These statuses apply to Australia port orders indicating the different stages in the port order progression: Verifying status This is the first status after creating the port order. The order remains in this state until the carrier completes the porting verification and moves the order to completed. You can update the account information, requested port time in this port order state. Verified status After verifying the porting order if there are numbers that are non-portable, then the port order is in this state. To continue the order progression, click the Continue with Partial Port button in the PSTN order overview page. This creates the port order with only the portable numbers. You can cancel the port order if you don’t want to continue with only the portable numbers. You can update the account information in this state but you can’t update the requested port time. Action required After verifying the porting order, all ordered numbers pass the portability check and proceed to this state. The Additional information section displays and you can upload the Proof of Address, Registration ID, Bill copy, and LOA documents. On submitting the Porting authorization form, you can still resubmit the document and update the account information. You can’t update the requested port time in this state. Pending After uploading all the required documents using the Additional Information section, the port order moves to the Pending state. You can’t update the Address Proof, Business Registration Document, and Customer local carrier Invoice Copy documents until either the status is rejected or upload again.

Manage PSTN

When placing orders for new numbers or porting existing numbers, you can check order status or port rejection notices in Control Hub.

From the customer view in https://admin.webex.com, go to Calling and then click PSTN.

Every order submitted is assigned a status.
Select an order to check its status.

ESA order is not provisioned until the additional information is provided.

Status Values for New Number Orders

Displayed Status	Description

Pending	A New numbers order has been created by the user.
Provisioned	New numbers have bene provisioned.
Error	An issue has been detected with the new numbers order. Create a TAC ticket to get help.

Change the emergency service address for a user

1	From the customer view in https://admin.webex.com, go to Users.
2	Select the user you want to modify and click Calling.
3	Select the primary phone number under Directory Numbers.
4	Under Emergency Service Address, select Custom Address.
5	Update the information for the user and click Save.

Change the emergency service address for a location

Once a location is set up with the Cisco Calling Plan, you can update the Emergency Service Address.

1	From the customer view in https://admin.webex.com, go to Management > Locations and select the location you want to update.
2	Next to PSTN Connection, click Manage.
3	Next to the Emergency Service Address, click Edit.
4	Enter the new addres and click Save.

Supported paths for PSTN migration

Use this matrix to know the potential PSTN migration paths for Webex Calling.

Webex Calling supports the following PSTN migration paths:

Using Self Service through Control Hub
- Premises-based PSTN, non-integrated CCPP, and non-integrated IntelePeer to Cisco Calling Plans. See Migrate to Cisco Calling plans.
- Non-integrated CCP to Integrated CCP. See, Migrating from Non-Integrated CCP to Integrated CCP (webex.com)
- Non-integrated CCP Provider including non-integrated Intelepeer to a Premises-based Solution. See, Configure premises-based PSTN in Control Hub
Using Manual Migration
- Premises-based solution to Integrated CCP Provider
- Integrated CCP Provider to Non-integrated CCP Provider (Exception: Non-integrated Intelepeer isn’t supported as the target CCP Provider)
- Integrated CCP Provider to Premises-based Solution

Here’s a list of unsupported PSTN migration paths:

Cisco Calling Plans to integrated Intelepeer
Integrated Intelepeer to Cisco Calling Plans

Your Cisco Calling Plan bill

When your billing begins:

Outbound Calling Plans ordered in CCW begin billing on the requested service date (RSD).
Outbound Calling Plans provisioned in Control Hub begin billing immediately.
Phone numbers provisioned in Control Hub begin billing immediately or, if ported from another provider, will begin billing upon port completion.

Outbound calling plan rates:

Rates for the Outbound Calling Plans and phone numbers are pro-rated using the same proration methord used to calculate the rates for the Webex Calling licenses.
International calling rates vary by country and are billed the month following usage.

Find support for Cisco Calling Plans

Cisco Calling Plans support is provided by various support divisions, depending on your need.

Table 26. Cisco Support Contact Information
Support Division	Purpose	Contact Information
Partner Help Desk (PHD)	Partner how-to and/or documentation inquiries, Pre-quoting Regulatory Tax and other enquiries about the Cisco Calling Plans offering.	North America: 1-844-613-6108 EMEA: +44 129 366 10 20 APAC: +61 3 7017 7272 Email: webexcalling-phd@cisco.com
PSTN Technical Support (PTS)	Partner/Customer PSTN-related questions Port order expedite requests Port date reschedules Port rejections Specific date/time requests for a port Port date changes post FOC (Firm Order Commitment) Order cancellations	Go to Control Hub and click on PSTN Help link for PSTN technical support.
TAC	Issues with Control Hub functionality Issues with service, such as dropped calls, call quality issues, or service outages	North America: 1-800-553-2447 EMEA: +32 2 704 5555 APAC: +61 2 8446 7411 Email: tac@cisco.com See also: Help with TAC Open a support case
Invoice & Collections	VAT, Payment and other invoicing queries	Contact the Collector on the Invoice via email or phone
Cisco SaaS Support Team (CES)	Quoting Order Booking & Management Provisioning Subscription Management Billing & Invoicing Disputes	Refer Partner Support Playbook and Cisco Calling Plans FAQ Create a case through link below if the required information is not found in the playbook - https://customerservice.cloudapps.cisco.com/

Cisco Calling Plans requirements and limitations

Requirements

Partners must be an authorized Webex Calling partner and have accepted the new Webex Calling addendum through enrollment into the Webex Calling PSTN program.
A minimum of one committed Outbound Calling Plan license must be purchased to enable access to all services associated with Cisco Calling Plans.

Limitations

Cisco Calling Plans are currently available to specified countries.
Existing Webex Calling locations or telephone numbers can only transition to Cisco Calling Plans in certain scenarios. For details on supported migration paths, refer Supported paths for PSTN migration section.
You can order a maximum of 100 new standard phone numbers at a time. Additional numbers can be placed as a separate order.
Toll-free numbers aren’t currently available. You can’t order new toll-free numbers or port existing toll-free numbers to the Cisco Calling Plans.
Cisco Calling Plans aren’t supported with Webex Contact Center or authorized for use in which high-concurrent calls or high-volume calls or uncommonly short or long calls are made. For more information about Webex Contact Center, see Get started with Webex Contact Center.
Some premium services and international destinations may not be available for operational purposes. If specific destinations which are not generally available are required, customers can open a support case to request availability.

Select your PSTN provider

The card view displays the PSTN provider available for the Webex Calling customer before configuring the PSTN location. The PSTN view displays both Providers and Orders.

The provider screen displays the various provider cards with the list of supported service types. The Providers section is classified into the following:

Preferred Calling providers
Certified Calling providers
Calling providers

The providers include the following:

Provider summary
List of locations configured with this provider
List of markets that the provider is available for the supported services.

If the customer has PSTN locations where Calling services aren’t set up, the Select this provider action bar displays. Use this option to configure the service for the PSTN location.

Select the location from the drop-down menu.
Choose the subscription type for the users to use the Cisco Calling plans. Click Next.
Complete the fields for Contract Information and Emergency Service Address configuration.

The PSTN service set up is now complete.

Cisco Calling Plans trials

Each trial account can provision up to 10 standard telephone numbers from Cisco Calling Plans with Webex Calling. It isn’t permitted to provision more than 10 numbers per trial.
Only new, standard telephone numbers are supported in trials. Ported numbers, consecutive blocks, and inbound toll-free numbers aren’t supported on trial accounts. You also cannot port numbers out of a trial. You must convert to a paid account if you wish to use these features.
International calling, along with Premium Service Call types I & II are blocked from use during the trial period.
Business Texting isn’t available on Webex Calling trial accounts.
Trial accounts are intended for technical evaluation purposes only, and not for normal commercial operation. As such, emergency services are only meant for technical evaluation; actual emergency calls can’t be guaranteed. Users shouldn’t place actual emergency service calls on a trial account.

Set up your Cisco Calling Plan

Once your Cisco Calling Plan service is enabled, you can select one of the PSTN options:

Cisco Calling Plans (Cisco PSTN)
Cloud Connected PSTN
Premise-based PSTN (Local Gateway must be enabled separately. For more information, see Configure Premises-based PSTN in Control Hub.)

1	From the customer view in https://admin.webex.com, go to Management > Locations and select the location you want to update.
2	Select the Calling tab and Click Manage next to PTSN Connection.
3	Select Cisco Calling Plans and click Next.
4	Enter the contact information and click Next. This field is for the contact information of the person who will sign the legal contract with Cisco.
5	Enter the Emergency Services Address (ESA), and click Save. By default, the ESA entered here is applied to all phone numbers for this location. You can change the ESA for an individual user if needed. For example, you may need to change the ESA if you have a remote employee who works from home.
6	On the summary screen, do one of the following: Add numbers. Click Done. You can add numbers to your calling plan later.

Order new phone numbers

With the Cisco Calling Plan, you can order new phone numbers directly from Cisco through Control Hub.

Before you begin

The Cisco Calling Plan must be enabled for your site before you can order new phone numbers through Control Hub.
When requesting new numbers, you can enter specific numbers. You can also allow the system to assign numbers from the search inventory based on the country, and city you select.
By default, the Emergency Service Address (ESA) entered for a location during your Cisco Calling Plan setup is applied to all phone numbers for that location.

1	From the customer view in https://admin.webex.com, go to Calling and click Numbers > Add Numbers.
2	Choose a location and click Select under Order New Numbers. Click Next.
3	Specify the Country, State, and the Area Code or City to search by.
4	Enter how many numbers you want auto-selected for you and click Search. You are provided a list of available numbers based on your selected criteria.
5	Select from the list of available numbers provided, based on your search criteria, and click Order. The selected numbers are displayed as pending to reserve.
6	Click Save Cart to reserve the selected numbers.
7	(Optional) Click X to remove the numbers from the cart
8	(Optional) Click Save Cart to update the reserved numbers.
9	Click Order to order the numbers selected.
10	Click View Order. On the order submission confirmation page, select the PSTN Orders to check your order status. This brings you to the PSTN Orders page.
11	Click on the PSTN Order to view order overview and order details.
12	Click Additional Information on the order overview side panel to upload Address Proof and Business Registration Document. The address proof and business registration document can be uploaded either from a pending number order or an ESA order. A provisioned number order does not allow you to upload additional documents.
13	Click Address Proof and Business Registration Document fields to upload the documents.
14	Click Choose a file to upload the documents. Browse the files from your system and click Open to upload documents.
15	Click X to close the side panel once you upload the documents.

Advance number ordering

1	From Control Hub, go to Servcies, and choose Calling > Numbers.
2	Click Manage > Add
3	Choose an Australia location from the Location drop-down menu which has a Cisco PSTN.
4	Select Order New Numbers and click Next.
5	Select City from the Search by drop-down.
6	Select a city from the City drop-down without any numbers assigned.
7	Click Search to search for any numbers assigned to the city.
8	Click Request, an Advance Order window to order numbers for the selected city displays.
9	Enter how many numbers that you want to order and click Add Advance Order to Cart. The cart displays based on your criteria and reserves the order.
10	Click Order to proceed and order the numbers reserved in the cart. The advanced order is successfully submitted.
11	Click View Order. This brings you to the PSTN Orders page.
12	Click on the PSTN Order to view an order overview and order details.
13	Click Phone Numbers on the order overview side panel to see the order details (Quantity and the city). You can open a Cisco support case in case you need more help on the advanced order placed.
14	Click Additional Information on the order overview side panel to upload the Address Proof and Business Registration Document. You can upload the address proof and business registration document either from a pending number order or an ESA order. A provisioned number order doesn’t allow you to upload additional documents.
15	Click Address Proof and Business Registration Document fields to upload the documents.
16	Click Choose a file to upload the documents. Browse the files from your system and click Open to upload documents.
17	Click Cancel Order to cancel the order. Canceling the order stops any progress made in ordering all numbers associated with this order and you can only cancel the order in the Calling Partner Help Center. Click Yes, Continue to confirm order cancellation and you’re redirected to the PTS page. Enter Customer Contact Number and click Submit to raise a support case.

Port Numbers

As an administrator, you can move existing phone numbers, including toll-free numbers, from your current PSTN to the Cisco Calling Plan option.

Before you begin

We strongly recommend you to read and familiarize yourself with the Cisco Calling Plan Number Porting Guidelines and Policies before you start porting the numbers.

Enable Cisco Calling Plan for your site before you port phone numbers through Control Hub.
A signed Letter of Agency (LOA) is needed, authorizing Cisco to place orders with the current PSTN carrier to move the service to Cisco. The current account owner or authorized signer must sign the LOA. You're prompted to sign the LOA while completing the porting steps.
To ensure a successful port, make sure you have the following information ready:
- List of all phone numbers to port
- Current PSTN provider account information
- Customer Service Record (CSR) if available
- Your account PIN if one exists.
When planning for which numbers to port, we recommend that you consider any number that receives inbound calls. See Cisco Calling Plan Number Policy for more information.
By default, the Emergency Service Address (ESA) entered for a location during your Cisco Calling Plan setup is applied to all phone numbers for that location.

1	From the customer view in https://admin.webex.com, go to Calling and click Manage > Add .
2	Choose a location and click Select under Port Numbers Over. Click Next.
3	Add the phone number that you want to keep, and then click Save & continue. Highlighted numbers are considered non-portable. PSTN Technical Support supports further review of these instances. The screenshot shows non-portable numbers highlighted in red in the Numbers page. For NZ number porting, the result of the portability check takes time. Once the numbers are ported, the user can view the number status in the PSTN overview > Phone numbers page. You receive an email after the porting process completes.
4	Enter the desired port information in the Port order details page. Make sure to enter the email address in the Additional contact field. Click Next.
5	Enter your contact information based on your current carrier provider in the Account information page. Enter the ACN/ABN number, which is the Australia Company/Business number. The ACN/ABN field applies based on the carrier provider.
6	Review your order and click Next. Use the Additional information section to upload all the required documents. The Additional information section is in the PSTN order overview page and displays before you review the order summary. To cancel a NZ port order, create a PEGA case. In the PSTN order overview page, click on Cancel order and then click Yes, continue. You’re redirected to PEGA to create the port order cancellation support case.
7	The order submission screen shows a summary of your port order. Click Done. Control Hub conducts a preliminary error check before you submit a port order. If there are any issues found with a port order, administrators receive an email notification, and an error message appears on the PSTN Orders screen. These statuses apply to New Zealand port orders indicating the different stages in the port order progression: Verifying status This is the first status after creating the port order. The order remains in this state until the carrier completes the porting verification and moves the order to completed. You can update the account information, requested port time in this port order state. Verified status After verifying the porting order if there are numbers that are non-portable, then the port order is in this state. To continue the order progression, click the Continue with Partial Port button in the PSTN order overview page. This creates the port order with only the portable numbers. You can cancel the port order if you don’t want to continue with only the portable numbers. You can update the account information in this state but you can’t update the requested port time. Action required After verifying the porting order, all ordered numbers pass the portability check and proceed to this state. The Additional information section displays and you can upload the Proof of Address, Registration ID, Bill copy, and LOA documents. On submitting the Porting authorization form, you can still resubmit the document and update the account information. You can’t update the requested port time in this state. Pending After uploading all the required documents using the Additional Information section, the port order moves to the Pending state. You can’t update the Address Proof, Business Registration Document, and Customer local carrier Invoice Copy documents until either the status is rejected or upload again.

Manage PSTN

When placing orders for new numbers or porting existing numbers, you can check order status or port rejection notices in Control Hub.

From the customer view in https://admin.webex.com, go to Calling and then click PSTN.

Every order submitted is assigned a status.
Select an order to check its status.

ESA order is not provisioned until the additional information is provided.

Status Values for New Number Orders

Displayed Status	Description

Pending	A New numbers order has been created by the user.
Provisioned	New numbers have bene provisioned.
Error	An issue has been detected with the new numbers order. Create a TAC ticket to get help.

Change the emergency service address for a user

1	From the customer view in https://admin.webex.com, go to Users.
2	Select the user you want to modify and click Calling.
3	Select the primary phone number under Directory Numbers.
4	Under Emergency Service Address, select Custom Address.
5	Update the information for the user and click Save.

Change the emergency service address for a location

Once a location is set up with the Cisco Calling Plan, you can update the Emergency Service Address.

1	From the customer view in https://admin.webex.com, go to Management > Locations and select the location you want to update.
2	Next to PSTN Connection, click Manage.
3	Next to the Emergency Service Address, click Edit.
4	Enter the new addres and click Save.

Supported paths for PSTN migration

Use this matrix to know the potential PSTN migration paths for Webex Calling.

Webex Calling supports the following PSTN migration paths:

Using Self Service through Control Hub
- Premises-based PSTN, non-integrated CCPP, and non-integrated IntelePeer to Cisco Calling Plans. See Migrate to Cisco Calling plans.
- Non-integrated CCP to Integrated CCP. See, Migrating from Non-Integrated CCP to Integrated CCP (webex.com)
- Non-integrated CCP Provider including non-integrated Intelepeer to a Premises-based Solution. See, Configure premises-based PSTN in Control Hub
Using Manual Migration
- Premises-based solution to Integrated CCP Provider
- Integrated CCP Provider to Non-integrated CCP Provider (Exception: Non-integrated Intelepeer isn’t supported as the target CCP Provider)
- Integrated CCP Provider to Premises-based Solution

Here’s a list of unsupported PSTN migration paths:

Cisco Calling Plans to integrated Intelepeer
Integrated Intelepeer to Cisco Calling Plans

Your Cisco Calling Plan bill

When your billing begins:

Outbound Calling Plans ordered in CCW begin billing on the requested service date (RSD).
Outbound Calling Plans provisioned in Control Hub begin billing immediately.
Phone numbers provisioned in Control Hub begin billing immediately or, if ported from another provider, will begin billing upon port completion.

Outbound calling plan rates:

Rates for the Outbound Calling Plans and phone numbers are pro-rated using the same proration methord used to calculate the rates for the Webex Calling licenses.
International calling rates vary by country and are billed the month following usage.

Find support for Cisco Calling Plans

Cisco Calling Plans support is provided by various support divisions, depending on your need.

Table 27. Cisco Support Contact Information
Support Division	Purpose	Contact Information
Partner Help Desk (PHD)	Partner how-to and/or documentation inquiries, Pre-quoting Regulatory Tax and other enquiries about the Cisco Calling Plans offering.	North America: 1-844-613-6108 EMEA: +44 129 366 10 20 APAC: +61 3 7017 7272 Email: webexcalling-phd@cisco.com
PSTN Technical Support (PTS)	Partner/Customer PSTN-related questions Port order expedite requests Port date reschedules Port rejections Specific date/time requests for a port Port date changes post FOC (Firm Order Commitment) Order cancellations	Go to Control Hub and click on PSTN Help link for PSTN technical support.
TAC	Issues with Control Hub functionality Issues with service, such as dropped calls, call quality issues, or service outages	North America: 1-800-553-2447 EMEA: +32 2 704 5555 APAC: +61 2 8446 7411 Email: tac@cisco.com See also: Help with TAC Open a support case
Invoice & Collections	VAT, Payment and other invoicing queries	Contact the Collector on the Invoice via email or phone
Cisco SaaS Support Team (CES)	Quoting Order Booking & Management Provisioning Subscription Management Billing & Invoicing Disputes	Refer Partner Support Playbook and Cisco Calling Plans FAQ Create a case through link below if the required information is not found in the playbook - https://customerservice.cloudapps.cisco.com/

Get Started with the Cisco Calling Plans

Status values for New Number Orders

Status Values for Ported Number Orders

Porting Error Messages

Status Values for New Number Orders

Status Values for Ported Number Orders

Porting Error Messages

Status values for New Number Orders

Status Values for Ported Number Orders

Porting Error Messages

Status Values for New Number Orders

Status Values for Ported Number Orders

Porting Error Messages

Status Values for New Number Orders

Status Values for Ported Number Orders

Porting Error Messages

Status Values for New Number Orders

Status Values for Ported Number Orders

Porting Error Messages

Status Values for New Number Orders

Status Values for Ported Number Orders

Porting Error Messages

Status Values for New Number Orders

Status Values for Ported Number Orders

Porting Error Messages

Port Cancellations and Rollbacks

Ordering new numbers

Status Values for New Number Orders

Status Values for Ported Number Orders

Porting Error Messages

Status Values for New Number Orders

Status Values for Ported Number Orders

Porting Error Messages

Status Values for New Number Orders

Status Values for Ported Number Orders

Porting Error Messages

Status Values for New Number Orders

Status Values for Ported Number Orders

Porting Error Messages

Status Values for New Number Orders

Status Values for Ported Number Orders

Porting Error Messages

Status Values for New Number Orders

Status Values for Ported Number Orders

Porting Error Messages

Status Values for New Number Orders

Status Values for Ported Number Orders

Porting Error Messages

Status Values for New Number Orders

Status Values for Ported Number Orders

Porting Error Messages

Status Values for New Number Orders

Status Values for Ported Number Orders

Porting Error Messages

Status Values for New Number Orders

Status Values for New Number Orders

Small Business

Enterprise

Devices

Solutions For

Resources

Company